ArchWork ARCPOD48Q Manual de usuario
USER MANUAL
MANUALE UTENTE
ARCPOD48Q
OUTDOOR COMPACT WASHLIGHT
EN - IT
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be
reproduced in any form or by any means for any commercial use.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteris-
tics stated in this instruction manual at any time and without prior notice.
All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it
REV. 01-04/19
1
ARCPOD48Q
Packing content • ARCPOD48Q
• Power adaptor cable
• Signal adaptor cable (2 pcs)
• User manual
TABLE OF CONTENTS Safety
General instructions
Warnings and installation precautions
1 Introduction
1. 1 Description
1. 2 Technical specifications
1. 3 Operating elements and connections
2 Installation
2. 1 Mounting
3 Functions and settings
3. 1 Operation
3. 2 Basic
3. 3 RDM mode
3. 4 RDM function
3. 5 Linking
3. 6 DMX addressing configuration
3. 7 DMX mode configuration
3. 8 DMX addressing
3. 9 Dimmer mode
3. 10 LED frequency
3. 11 Sensor menu
3. 12 Sw version
3. 13 UID
3. 14 Factory Default
3. 15 Manual color
3. 16 Full on mode
3. 17 Connection of the DMX line
3. 18 Construction of the DMX termination
3. 19 DMX control
4 Maintenance
4. 1 Maintenance and cleaning the unit
4. 2 Trouble shooting
2
2
3
3
5
6
7
7
8
8
9
9
9
9
10
10
10
10
11
11
11
11
12
12
13
16
16
ARCPOD48Q
2
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are there-
fore marked with .
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modifications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
• Connection must be made to a power supply system fitted with efficient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a qualified electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
• This unit is not for home use, only professional applications.
• Never use the fixture under the following conditions:
- in places subject to vibrations or bumps;
- in places with an ambient temperature of over 50°C.
• Make certain that no inflammable liquids, water or metal objects enter the fixture.
• Do not dismantle or modify the fixture.
• All work must always be carried out by qualified technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation definitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• If this device will be operated in any way different to the one described in this manual, it may suffer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
• Before starting any maintenance work or cleaning the projector, cut off power from the main supply.
• When carrying out any work, always comply scrupulously with all the regulations (particularly regard-
ing safety) currently in force in the country in which the fixture’s being used.
• The minimum distance between the fixture and surrounding walls must be more than 50 cm and the
air vents at the housing must not be covered in any case.
• Keep any inflammable material at a safe distance from the fixture.
• The maximum temperature that can be reached on the external surface of the fitting, in a thermally
steady state, is high. After power off, please cool down over 15 minutes.
• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their effectiveness is impaired.
• The lamp (LED) shall be changed if it has become damaged or thermally deformed.
• Never look directly at the light beam. Please note that fast changes in lighting, e. g. flashing light, may
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
• This product was designed and built strictly for the use indicated in this documentation. Any other use,
not expressly indicated here, could compromise the good condition/operation of the product and/or
be a source of danger.
• We decline any liability deriving from improper use of the product.
3
ARCPOD48Q
- 1 - INTRODUCTION
1.1 DESCRIPTION
ARCPOD48Q is a compact high-power outdoor wash light featuring an outstanding brightness of 28208
lumens. Equipped with 48 x 10W RGBW full-colour LEDs, delivering superior colour mixing. The slim siz-
ing, as well as the wide range of available optics through the magnet, makes the ARCPOD48Q an incred-
ibly flexible and versatile device for large outdoor applications.
1.2 TECHNICAL SPECIFICATIONS
LIGHT SOURCE
• Source: 48X10W RGBW/FC LEDs
• Luminous flux: 28208lm
• Lux: (15°) 26200lux @3m full
• Lux: (15°) 9432lux @5m full
• Source life expectancy: >50.000 h
OPTICS
• Beam angle: 15°
• Field angle: 27°
• Additional optics: 10°, 25°, 45°
• Other: barn doors not included
COLOUR SYSTEM
• Colour mixing: RGBW/FC
• CTC: CTC control through independent DMX channel
• Colour wheel: virtual colour wheel with presets
• Macros: several pre-build macros with adjustable speed
DYNAMIC EFFECTS
• FX generator: section effect with 4 horizontal individually select and control sections
• Static colour mode: selection of static colour
• Manual colour mode: manual adjustment of colour
• Auto mode: built-in programs with execution speed adjustment
BODY
• Tilt angle: 0-130° manual
• Body: sturdy die-cast aluminium body conceived for long-time durability
• Body colour: grey
CONTROL
• Protocols: DMX512, RDM
• DMX channels: 5 / 7 / 10 / 17 / 22channel
• RDM: RDM ready for fixture remote monitor and settings
• Display: user interface through DATAMASTER external coder (not included)
• Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included
• Master/Slave: for synchronized operation of more units linked in a chain
ARCPOD48Q
4
ELECTRONICS
• Dimmer: linear 0~100% electronic dimmer
• Dimmer curves: 4 different dimming curves available
• Strobe / shutter: 1 - 30 Hz, electronic
• Operating temperature: -20° ~ +50°
• Flicker: flicker free operation
• Selectable PWM: 600~25K Hz
ELECTRICAL
• Power consumption: 700
• Power supply: 100-240V – 50/60Hz
• Power consumption (at 230V): 521W
• Power consumption (at 120V): 552W
• Output (at 230V): 4 units on a single power line
• Output (at 120V): 2 units on a single power line
• Power factor: 0.95
PHYSICAL
• Cooling: natural cooling of the peculiar chassis and to absence of fans
• Adaptors: XLR and Shuko 16A adaptors included
• Signal connection: moulded IP signal IN/OUT connectors
• Power connection: moulded IP power IN/OUT connectors
• IP rating: 66 for outdoor installations
• Dimensions (WxHxD): 574x304x114 mm
• Weight: 14kg
304
574 114
Technical drawing Fig.1
5
ARCPOD48Q
1.3 OPERATING ELEMENTS AND CONNECTIONS
1. LED panel
2. MECHANICAL SYSTEM for individual position-
ing of Led panels
3. HOLES for fixing to the ground
4. POWER IN: for connection to a socket
(100-240V~/50-60Hz) via the supplied mains
cable
Fig.2
5. DMX IN (5-pole XLR): 1 = ground, 2 = DMX-, 3 =
DMX+, 4 N/C, 5 N/C.
6. HEATSINK
7. DMX OUT (5-pole XLR): 1 = ground, 2 = DMX-, 3 =
DMX+, 4 N/C, 5 N/C.
8. POWER OUT: connect to supply power to the next
unit.
1
2
3
4567 8
ARCPOD48Q
6
- 2 - INSTALLATION
2.1 MOUNTING
The ARCPOD48Q may be set up on a solid and even surface using the fastening devices of the base (2).
Stable mounting clips are required for fixing.
Also make sure to comply with all safety warnings.
Fig.3
1
2
7
ARCPOD48Q
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240V~/50-60Hz). To switch off, disconnect the mains
plug from the socket. For a more convenient operation it is recommended to connect the unit to a socket
which can be switched on and off via light switch.
3.2 BASIC
To control the ARCPOD48Q connect the device to a DATAMASTER (fig.4).
DATAMASTER is a powerful RDM-DMX tool that automatically detects connected RDM devices, allowing
direct and fast monitoring and control. Information on the status of the connected fixture can be read
from the DATAMASTER display.
DMX OUT
Fig.4
ARCPOD48Q
8
3.3 RDM MODE
To use the ARCPOD48Q proceed as follows:
• Connect the ARCPOD48Q to a DATAMASTER.
• Turn on the DATAMASTER using the dedicated button.
• With the DATAMASTER select RDM to show the following info about:
• Model
• Manufacturer
• Function
• Temperature
• Factory Default
• Software Version
• UID
• Manual Color
• Effects mode
• Full On
3.4 MENU STRUCTURE
MENU
1DMX ADDRESS ð001-512 Default: 1
2DMX MODE ð5CH
7CH
10CH
17CH
22CH
Default: 10CH
3DIMMER MODE ðOff
Dimmer1
Dimmer2
Dimmer3
Default: Off
4LED FREQUENCY ð600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25kHz
Default: 1200Hz
5SPECIFIC PIDS ð8200 (RED)
8201 (Green)
8202 (Blue)
8203 (White)
8217 (Full On Mode)
8206 (Clear Device Hours)
ð0:HB;1:Studio
White Balance
Default: HB
Tabla de contenidos
Idiomas:
Otros manuales de Equipo de DJ de ArchWork
Manuales populares de Equipo de DJ de otras marcas
thomann
thomann Stairville DJ Lase 40-G MK-III Manual de usuario
Eagletone
Eagletone 6 Eyes Flower Manual de usuario
EuroLite
EuroLite FLD-1508 Manual de usuario
Technical Pro
Technical Pro LG8xSEA Manual de usuario
JB Systems
JB Systems Lounge Laser DMX Manual de usuario
Lightmaxx
Lightmaxx Vega Halo 90 Manual de usuario
Elation
Elation FUZE WASH Z350 Manual de usuario
Maverick
Maverick MK3 WASH Manual de usuario
Infinity
Infinity TF-260C7 Fresnel Manual de usuario
Chauvet
Chauvet EVE E-50Z Manual de usuario
Eliminator Lighting
Eliminator Lighting E 138 Manual de usuario
EuroLite
EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario