Arbor Technology Hollies Manual
01945410950 support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Generic build instructions –Hollies Garden Table
Before you commence the assembly process, we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to check that you
have the correct components. If for any reason you need assistance, you can find our contact
details on the top of page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and
that you use another person to assist you if necessary.
You can check our YouTube channel for assemble video.
Please click here
Package contents Tools required
•2 x Ends Electric screwdriver (No.2 Pozi bit) or Screwdriver.
•2x long 2x short braces
•1 x Bases (2 for double shelve option)
•1 x Bench Top
•1 x Back panel for version with back
•65mm screws 38mm screws
01945410950 support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 1
Step 2
Step 3
Step 4
Lay the top upside down and place a leg in position as
shown. Ensure the leg is pushed into the corner and
secure with the supplied screws use pre-drilled guide
holes. Repeat same step on the other half of the leg.
Ensure the brace is pushed flush with table top and leg
frame and secure into place, repeat this step on the
other leg.
Place table back on its feet. Slide the bottom shelve into
position. Keep the shelve straight, parallel to the table,
centralize and secure with provided golden screws. *For
double shelve variation please slide second shelve into
2nd opening.
Ensure the long brace is pushed flush with table top and
leg frame and secure into place, repeat this step on the
other leg.
01945410950 support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 5
Your workbench is now completed!
We hope that you found your product quick and easy to assemble but if not and you require further
assistance or have any questions you can contact us via details above.
Also, you can check our YouTube channel for assemble videos, click on the link below:
https://www.youtube.com/watch?v=pDsa9qvdHXk
Or
Type in YouTube search box Arbor Garden Solutions.
Fit the back panel into position. Back secure with
provided 4 golden screws.
Otros manuales de Almacenamiento de herramientas de Arbor Technology
Arbor Technology
Arbor Technology TREATED-3FT-WBP-WW-DS Manual
Arbor Technology
Arbor Technology Nanofex Craftsman/Jewellers Workbench Manual de usuario
Arbor Technology
Arbor Technology Acorn Manual
Arbor Technology
Arbor Technology Artifex Craftsman/Jewellers Workbench Manual de usuario
Arbor Technology
Arbor Technology 01945 410950 Manual de usuario
