Arbor Technology Gladius G0830 Manual de usuario
G0830
AMI
BIOS
Flash
SOP
(with USB HUB)
Date
2019/01/31
Release by
Andy Yao
Version
1.0
Preparation：
1. Bootable USB Flash Disk (FAT32).
2. USB HUB with external power.
3. OTG Cable (USB to Micor USB).
4. USB Keyboard.
5. Flash tool.
6. BIOS files.
(1) How to create a bootable USB dongle：
1. Run rufus-3.4.exe on your PC and follow instruction to run process.
2. It will show status in READY once process is completed.
(2) How to flash BIOS：
1. Copy EFI folder into Bootable USB Flash Disk.
2. Copy BIOS Flash tool into Bootable USB Flash Disk.
3. Disable Secure Boot.
3.1 Power on G0830 and press Delete key get into BIOS menu.
3.2 Select Secure Boot menu from Security sheet.
3.3 Disable Secure Boot then press F10 to save configuration and exit.
4. Turn on G0830 and press F11 get into boot menu.
5. Select “EFI shell” to boot from USB Flash Disk.
6. Type command at shell as below.
5.1：Fs1:
5.2：XXX.nsh(Ex: 027.nsh)
5.3：The device will shutdown once flash process is completed.
5.4：Turn on G0830 by press power button.
Warning：
1. Please don’t remove USB dongle or G0830 from USB HUB because the system will not boot
anymore.
2. Please reflash BIOS again if process was failed.
Otros manuales para Gladius G0830
1
Otros manuales de Tableta de Arbor Technology
Arbor Technology
Arbor Technology HT10 Manual de usuario
Arbor Technology
Arbor Technology Gladius G1056 Manual de usuario
Arbor Technology
Arbor Technology Gladius G1052C Manual de usuario
Arbor Technology
Arbor Technology Gladius G0975 Manual de usuario
Arbor Technology
Arbor Technology M0830 Manual de usuario
Arbor Technology
Arbor Technology MIL-6800 Manual de usuario
Arbor Technology
Arbor Technology Gladius G0830 Manual de usuario
Arbor Technology
Arbor Technology Gladius G0710S Manual de usuario
Arbor Technology
Arbor Technology Gladius G1050 Series Manual de usuario
Arbor Technology
Arbor Technology Gladius 10 Manual de usuario
