Arbiter Systems 1205D Manual de usuario

MODEL 1205D SETUP GUIDE

Unpacking

Carefully check the packing material for these accessories: GNSS antenna, standard antenna cable

assembly, and one DIN rail clip with mounting screws. Handle the GNSS antenna carefully, as it may

be damaged if dropped.

Installing GNSS Antenna

The GNSS antenna included with the clock is designed to be threaded onto a 3/4 inch diameter pipe (not

included). The optional Antenna Mounting Kit (part number: AS0044600) includes a 3/4 inch diameter pipe

nipple and makes installation easier. The antenna works best with a clear view of the sky in all directions.

GNSS Antenna

3/4 inch Pipe (not included)

Operate LED Antenna Cable

Figure 1: Antenna Mounting Example

1. Pass the antenna cable through the pipe and attach the cable to the antenna. Tighten by hand,

spinning the cable connector. DO NOT spin the antenna onto the cable or DAMAGE may occur.

2. Thread the 3/4 inch diameter pipe (not included) into the base of the antenna and snug by hand.

3. Mount the pipe to a ﬁxture, such as our Antenna Mounting Kit.

4. Install GNSS Surge Protector or In-Line Preampliﬁer if needed. Reference their own instructions.

5. Connect the antenna cable to the clock.

Connecting Power Cables

• VERIFY that the voltage level is in the correct range.

• VERIFY that the polarity is as speciﬁed on the label.

• Strip the insulation 1/4 inch and DO NOT tin.

• A fuse is located to the left of each installed power inlet connector.

Connecting Signal Cables

Strip the insulation 1/4 inch and DO NOT tin.

Installing DIN Rail Clip

The Model 1205D may be mounted with a DIN rail clip that can be attached to one of three sides.

Arbiter Systems, Inc. ·1324 Vendels Circle, Suite 121 ·Paso Robles, CA 93446 ·USA ·Tel: +1.805.237.3831

Fax: +1.805.238.5717 ·E-mail: techsupport@arbiter.com ·Internet: http://www.arbiter.com PD0054500C 1

MODEL 1205D SETUP GUIDE

PORT 1

PORT 2

100 – 350 Vdc

85 – 264 Vac / 47 – 440 Hz

100VA MAX.

3.15 AT

400 Vdc

500 Vac

GND L2

DC–

DC+

1205D GNSS SYNCHRONIZED CLOCK

ANTENNA

STATUS

RS–485

PROGRAMMABLE PULSE

341 2 5 6

IRIG

OPEN

DRAIN

ANALOG

EVENT

RS–232

PORT 1

RS–232

PORT 2

RELAY

GNSS

FAULT

OPERATE NORMAL LEARN

UNLOCKED ALARM

0 – 5 Vdc

PORT 3

Figure 2: 1205D Connections Figure 3: 1205D DIN Rail Mounting Clip

Figure 4: Input/Output Connector showing Locking Retention Hardware

Conﬁguring with Web Interface

1. Connect one of the ports to the network or computer.

• NET 1 is set to the static address 192.168.0.232

• NET 2 and NET 3 are set for DHCP. Find assigned IP address:

–Press SYSTEM until view NETWORK STATUS?

–Press ENTER

–Press UP or DOWN to review the IP and MAC address of each port.

2. Use a web browser (Firefox or Chrome work best). Use the IP address of the port

(http://192.168.0.232). The UI will provide a login screen for entering the username and password.

3. The default username is admin and the default password is password.

Additional Help

The operation manual is available as a free download from www.arbiter.com or to purchase.

Arbiter Systems, Inc. ·1324 Vendels Circle, Suite 121 ·Paso Robles, CA 93446 ·USA ·Tel: +1.805.237.3831

2 Fax: +1.805.238.5717 ·E-mail: techsupport@arbiter.com ·Internet: http://www.arbiter.com

Tabla de contenidos

Otros manuales de Reloj de Arbiter Systems

Arbiter Systems

Arbiter Systems 1200B Manual de usuario

Arbiter Systems

Arbiter Systems 1094B Manual de instalación

Arbiter Systems

Arbiter Systems 1201B Manual de instalación

Arbiter Systems

Arbiter Systems 1205B Manual de usuario

Arbiter Systems

Arbiter Systems 120A Manual de usuario

Arbiter Systems

Arbiter Systems 1205B Manual de usuario

Arbiter Systems

Arbiter Systems 1200B Manual de usuario

Arbiter Systems

Arbiter Systems 1095A Manual de usuario

Arbiter Systems

Arbiter Systems 1084A Manual de usuario

Arbiter Systems

Arbiter Systems 1095A Manual de usuario

Arbiter Systems

Arbiter Systems 1205B Manual de usuario

Arbiter Systems

Arbiter Systems 1092A Manual de usuario

Arbiter Systems

Arbiter Systems 1088A Manual de usuario

Arbiter Systems

Arbiter Systems 1084A Manual de instalación

Manuales populares de Reloj de otras marcas

Silicon Laboratories

Silicon Laboratories SI5324 Manual de usuario

Heathkit

Heathkit GC-1005 Manual de usuario

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manual de usuario

Andrew O'Malley

Andrew O'Malley DOTKLOK Manual de usuario

ALGE-Timing

ALGE-Timing ASC3 Manual de usuario

Bodet

Bodet Profil 960 Manual de usuario

Nixie Clock

Nixie Clock Divergence Meter Manual de usuario

La Crosse Technology

La Crosse Technology WS-8256-AL Manual de usuario

Mini Gadgets

Mini Gadgets MCPro Manual de usuario

Casio

Casio TMR-200 Manual de usuario

Progetti

Progetti ILTEMPOSTRINGE Manual

BVItech

BVItech BV-101 Manual de usuario

Progetti

Progetti KALIMERO Manual

La Crosse Technology

La Crosse Technology WT-3141b Manual

La Crosse Technology

La Crosse Technology W86531 Manual de usuario

Sharp

Sharp SPC900 Manual de usuario

La Crosse Technology

La Crosse Technology 404-50447 Manual de usuario

Datexx

Datexx DF0063 Manual de usuario