Aquatic GP1 Guía
PLEASE READ THIS INSTRUCTION MANUAL BEFORE
INSTALLATION AND OPERATION
USER / INSTALLATION MANUAL
GP1 - WATERPROOF STEREO
CHARGING
RADIO
AM/FM
RADIO
AM/FM
288W
POWER
DSP EQ
DSP EQ
1 Getting Started...............................................................................................................................................
1.1 Contents..................................................................................................................................................
1.2 Connections.............................................................................................................................................
1.3 Connections Diagram...............................................................................................................................
1.4 Installation.............................................................................................................................................
1.5 Power On.................................................................................................................................................
2 Controlling the Stereo.....................................................................................................................................
2.1 Location of Controls.................................................................................................................................
2.2 Control Functions.....................................................................................................................................
3 Listening via Bluetooth...................................................................................................................................
3.1 Listening via Bluetooth............................................................................................................................
3.2 Pair with Bluetooth Audio Device.............................................................................................................
3.3 Listening via Bluetooth Audio Device.......................................................................................................
3.4 Bluetooth Multi-Link................................................................................................................................
4 Listening via USB...........................................................................................................................................
4.1 Listening via USB....................................................................................................................................
4.2 Direct Search by Track Number.................................................................................................................
4.3 Random Playback.....................................................................................................................................
4.4 Repeat Playback.......................................................................................................................................
4.5 Device Charging.......................................................................................................................................
5 Listening to AM/FM Radio...............................................................................................................................
5.1 Listening to AM/FM Radio.........................................................................................................................
5.2 Manually Save AM/FM Radio Stations to Memory......................................................................................
5.3 Automatically Save AM/FM Radio Stations to Memory...............................................................................
5.4 Listening to Saved Radio Memory.............................................................................................................
6 Audio & Settings Menus..................................................................................................................................
6.1 Audio Menu..............................................................................................................................................
6.1.1 EQ.....................................................................................................................................................
6.1.2 Loudness...........................................................................................................................................
6.2 Settings Menu.........................................................................................................................................
6.2.1 Beep Tone..........................................................................................................................................
6.2.2 Info/Clock..........................................................................................................................................
6.2.3 Power On Volume (P-VOL)..................................................................................................................
6.2.4 Area USA/Euro...................................................................................................................................
6.2.5 Local On/Off......................................................................................................................................
6.2.6 Stereo/Mono......................................................................................................................................
7 Additional Features........................................................................................................................................
7.1 Listening to Auxiliary Devices..................................................................................................................
7.2 Dimmer High/Low....................................................................................................................................
8 Specifications & Dimensions..........................................................................................................................
8.1 Specifications..........................................................................................................................................
8.2 Dimensions..............................................................................................................................................
9 Warranty Information......................................................................................................................................
3
3
3
4
5
5
6
6
7
8
8
8
8
8
9
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
11
11
12
12
12
12
12
12
12
13
13
13
14
Table of Contents GP1 WATERPROOF STEREO
2www.aquaticav.com
• GP1 Gauge Size Waterproof Stereo
• User/Installation Manual
• Wiring Harness (AQ-UNH-2)
• Mounting Bracket
• Two (2) Stainless Steel screws
• Two (2) Stainless Steel nuts
1.1 Contents
1. 12-pin Watertight Harness
The 12-pin harness supplies power and ground connections to the stereo and four (4)
speaker channel output connections from the stereo.
Do not cut or modify the 12-pin harness on the stereo side or warranty will be void.
2. AM/FM Radio Antenna Jack
Allows connection of AM/FM radio antenna. For best AM/FM performance make sure the
antenna is extended to the highest achievable position.
3. Auxiliary Outputs
Allows external amplifiers to be connected to power additional speakers.
4. Auxiliary Inputs
Allows an additional RCA input, from a standalone unit or another stereo source.
5. USB Input
Play USB thumb drives with supported audio media and charge devices when connected.
1.2 Connections (see Wiring Diagram 1.3)
Getting Started GP1 WATERPROOF STEREO
3www.aquaticav.com
1.3 Connections Diagram
All open wire connections should be soldered and protected against water and dust for best long-term performance.
No lower than a 2 Ohm speaker load should be used or damage may occur to the stereo. Make sure the polarity of
speakers is connected correctly.
12-pin Watertight Harness*
Pin No. Wire Color Description
1 Green LR Speaker (+)
2 Green/Black LR Speaker (-)
3 Red Acc (+12V)
4 White LF Speaker (+)
5 White/Black LF Speaker (-)
6 Yellow Battery (+12V)
7 Gray RF Speaker (+)
8 Gray/Black RF Speaker (-)
9 Blue Power AMP Remote
10 Violet RR Speaker (+)
11 Violet/Black RR Speaker (-)
12 Black Ground
1
4
7
10
2
A- A
5
8
11
3
6
9
12
A
A
1
2
4
3
5
AM/FM Radio Antenna Jack
RCA Auxiliary Inputs (Black)
RCA Auxiliary Outputs (Gray)
USB Input (Black)
12-pin Watertight Harness
Fuse 15A
Right Channel (Red)
Left Channel (White)
Right Channel (Red)
Left Channel (White)
Getting Started GP1 WATERPROOF STEREO
4www.aquaticav.com
In a spa application the red and yellow wires should be jumped together and then connected to
the +12VDC output of the power source. In this set up the GP1 will always be on, with a very low
current draw when idle.
In a boat, ATV or other application requiring power from a battery, the yellow wire (constant
power) should be connected to the battery, and the red wire should be connected to the ignition
or a switch.
For detailed instructions you can check out our online video:
‘How to wire your Aquatic AV stereo system’
http://www.aquaticav.com/support/videos
Once all connections are made press the POWER/MUTE button and the stereo will turn ON. Press
and hold the POWER/MUTE button to turn the unit OFF.
1.5 Power On
Mounting hole size
3” (76.2mm)
Mounting
Bracket
Dashboard
Break Lines
PLEASE READ THIS INSTRUCTION MANUAL BEFORE INSTALLATION AND OPERATION.
Aquatic AV recommends installation of this stereo by a professional technician.
Aquatic AV recommends using the ‘measure twice, cut once’ method!
1.4 Installation
1. Check clearances on both sides of a planned installation area before drilling any holes.
2. Drill a pilot hole at the center point and then use a circular saw to drill a hole with a 3”
(76.2mm) diameter.
3. Slide the GP1 stereo through the mounting hole and secure the stereo using the mounting
bracket, screws and washers. If the bracket needs to be shortened this can be done by
removing the appropriate number of breakaway segments using a pair of pliars.
4. Once complete make sure the outside surface is clean and clear of debris to ensure
a proper water/dust seal. The GP1 stereo has an external water/dust proof gasket which
requires a clean and flat surface for long-term environmental protection performance.
Getting Started GP1 WATERPROOF STEREO
5www.aquaticav.com
1. Power/Mute
2. LCD Display
3. Display
4. Dimmer
5. Band / File Search
6. Next / Fast Forward
7. Preset / Play/Pause
8. Rotary Selector
9. Previous / Fast Rewind
10. Mode
2.1 Location of Controls
1 2 3 4
10 9 8 7 6 5
MODE
MUTE
DISP
DIM
BAND
Controlling the Stereo GP1 WATERPROOF STEREO
6www.aquaticav.com
2.2 Control Functions
If your music player is connected via the Auxiliary input you will not be able to control track or receive track
information.
Button Action AM/FM USB AUX BLUETOOTH
Power/Mute
Short Press Power ON
Mute ON/OFF
Long Press Power OFF
Dimmer
Short Press Dimmer High/Low
Long Press No function Repeat Playback No function No function
Mode
Short Press Change source
Long Press Bluetooth off/link
Band /
File Search
Short Press Change Band File search No function No function
Long Press Auto Store Random Playback No function No function
Display
Short Press Info/Clock
Long Press Clock setting
Preset /
Play/Pause
Short Press Show CH1. Rotate to
select CH1-CH6 Play/Pause No function Play/Pause
Long Press Manual Save Station No function No function No function
Next /
Fast Forward
Short Press Seek Up Next File No function Next File
Long Press Turn Up Fast Forward Press and Hold for 5 sec
to reset unit No function
Previous /
Fast Rewind
Short Press Seek Down Previous File No function Previous File
Long Press Turn Down Fast Rewind Show Version No function
Rotary Selector
Rotate Volume Up/Down Volume Up/Down Volume Up/Down Volume Up/Down
Short Press BAS / TRE / BAL / FAD
/ EQ / LOUD
BAS / TRE / BAL / FAD /
EQ / LOUD
BAS / TRE / BAL / FAD /
EQ / LOUD
BAS / TRE / BAL / FAD /
EQ / LOUD
Long Press BEEP / CLOCK / P-VOL
/ AREA / LOCAL / ST
BEEP / CLOCK / P-VOL /
AREA / LOCAL / ST
BEEP / CLOCK / P-VOL /
AREA / LOCAL / ST
BEEP / CLOCK / P-VOL /
AREA / LOCAL / ST
Navigating past the last Settings Menu item (Restore) will automatically exit the Settings Menu and enter the Audio
Menu. Press and hold Audio/Menu button to enter the Settings Menu again.
Controlling the Stereo GP1 WATERPROOF STEREO
7www.aquaticav.com
1. Enable Bluetooth Audio mode by pressing MODE and selecting Bluetooth.
2. Switch on your Bluetooth Audio device.
3. Select ‘AQUATIC AV GP1’ from the list of available devices to pair. No password should be
required however if prompted for a password use ‘0000’.
4. A Bluetooth logo will illuminate on the stereo’s LCD to verify Bluetooth is connected.
3.2 Pair with Bluetooth Audio Device
3.1 Listening via Bluetooth
The Bluetooth Audio menu is accessible by pressing the MODE button and is used to connect a
Bluetooth Audio device or disconnect a Bluetooth Audio device that has already been paired.
3.3 Listening via Bluetooth Audio Device
1. Bluetooth Audio mode will be activated once a Bluetooth Audio device is paired in any
mode. Use MODE to change to Bluetooth Audio mode to listen to music from your device.
2. Play the song from device and the sound will play through the stereo.
3. Press PLAY/PAUSE to play or pause the song.
4. Press FAST REWIND / FAST FORWARD buttons to play previous/next song file.
5. Previous/next track and volume up/down can also be controlled directly from your
Bluetooth Audio device.
3.4 Bluetooth Multi-link
A second Bluetooth Audio device can pair to the stereo even when music is playing from the first
Bluetooth Audio device.
1. Long press MODE to unlink first device.
2. Pair second device by selecting ‘Aquatic AV GP1’ in the device’s Bluetooth menu.
3. Once paired, playing music from device 2 will override device 1 and the stereo should begin
playing from device 2.
4. Should you wish to play music from the first device again, repeat steps 1, 2 & 3.
Bluetooth functions are device specific and not all devices will allow Fast Forward/Rewind or Next/Previous to work.
Listening via Bluetooth GP1 WATERPROOF STEREO
8www.aquaticav.com
4.5 Device Charging
When specified USB devices such as Smartphones or MP3 players are connected with a standard
male-to-female USB cable the device’s battery will charge automatically. The USB connection will
deliver up to 2.1A of current to charge a device battery.
4.1 Listening via USB
1. Attach your USB thumb drive to the female USB connector and the music files on the
USB will play automatically.
2. If your USB device is readable then USB source mode will be automatically selected and
your compatible content will begin to play.
3. Press PLAY/PAUSE to play or pause the music.
4. Press FAST REWIND / FAST FORWARD once play previous / next song file.
5. Press and hold FAST REWIND / FAST FORWARD to fast forward / fast rewind the song file.
Playback and navigation of music files via USB includes MP3 and WMA files.
4.3 Random Playback
Press and hold the BAND button to toggle RDM ON or RDM OFF (default).
4.4 Repeat Playback
Press and hold the DIM button to toggle RPT ONE, RPT FOLD, RPT ALL (default).
1. Press BAND button and the display will show ‘NUM ****’
2. Turn the Rotary Selector to select numeric value.
3. Press FAST REWIND / FAST FORWARD to move to the next number in the sequence.
4. Once the desired file number is selected press the Rotary Selector or allow the timer to
auto select the track number being displayed.
4.2 Direct Search by Track number
Listening via USB GP1 WATERPROOF STEREO
9www.aquaticav.com
5.2 Manually Save AM/FM Radio Stations to Memory
1. Tune to the station you would like to be saved as a preset.
2. Press and hold the PLAY/PAUSE button and the stereo will display ‘SAVE CH1’.
3. Turn the Rotary Selector to select the desired preset slot you would like to save the current
station to.
4. Press the Rotary Selector to save the preset.
5. Upon successfully saving a preset the preset number that was chosen will be shown in the
right corner.
Presets are only for the current band you are on. Each band FM1, FM2, FM3, AM1 and AM2 has six presets for a
total of 30 (18x FM & 12x AM).
5.1 Listening to AM/FM Radio
1. Enter radio mode by pressing MODE and selecting FM1, FM2, FM3, AM1 or AM2.
2. Press BAND button to select the radio band.
3. Navigate the available stations using the FAST REWIND / FAST FORWARD buttons.
4. Press FAST REWIND / FAST FORWARD to seek another station.
5. Press and hold FAST REWIND / FAST FORWARD for manual tuning. (Manual tuning will
time out after 5 seconds of no action then will revert back to Seek/Auto).
5.3 Automatically Save AM/FM Radio Stations to Memory
Press and hold the BAND button for 2 seconds to auto store stations to preset locations 1-6 of
bands FM1-FM3 when in FM or AM1-AM2 when in AM.
5.4 Listening to Saved Radio Memory
1. Press the PLAY/PAUSE button and the stereo will display CH ‘X’.
2. Turn the Rotary Selector to the desired preset channel.
3. Press the Rotary Selector to start listening to the preset selected.
10www.aquaticav.com
Listening to AM/FM Radio GP1 WATERPROOF STEREO
Tabla de contenidos
Otros manuales de Sistema estéreo de Aquatic
