AquaScape 99763 Manual de usuario

DIY Pond Kit

INSTRUCTION

MANUAL

This booklet contains the instructions for all

Pond Kit sizes. The Pond Kit system is designed

to have a waterfall and pond. Follow the step-

by-step instructions in the order they are listed.

Skipping steps or changing the order will create

extra work in the long run. We want to make this

experience as easy as possible, allowing you to

concentrate on the creativity needed to design

your pond.

On the next page you will nd QR codes that will

provide further inspiration, troubleshooting, and

maintenance help.

Introduction

Thank you for your purchase of the

Aquascape Pond Kit. We are pleased that you

have decided to explore the water gardening

lifestyle.

DIY BACKYARD

POND KIT

www.aquascapeinc.com

Table of Contents

VISIT OUR

WEBSITE

DOWNLOAD A

FREE COPY OF

OUR CATALOG Introduction …………………………………………… 2

Components …………………………………………… 4

Recommended Tools ………………………………… 5

Helpful Symbols ……………………………………… 6

Safety Information……………………………………… 6

Electrical Speciﬁcations ……………………………… 7

Quick Step Guide ……………………………………… 7

Installation Instructions………………………………… 8

Replacement Parts ………………………………… 28

Warranty Information ……………………………… 30

VISIT AQUAS-

CAPE ACADEMY

AQUASCAPE ACADEMY

Online Training

Access a series of courses

designed to help propel you

forward as a water feature

hobbyist.

☎ Contact Us

For more information about our company or products

please visit our website at www.aquascapeinc.com or

call (US) 1-866-877-6637 (CAN) 1-866-766-3426.

www.facebook.com/AquascapeInc

www.youtube.com/aquascape4

www.twitter.com/AquascapeInc

www.ﬂipboard.com/proﬁle/AquascapeInc

Find us on:

☎

CAN 1-866-766-3426 |

☎

US 1-866-877-6637

Components

No. Description

1. (1) Skimmer Lid

2. (1) Signature Series 200

Pond Skimmer

3. (1) Skimmer Weir

4. (1) Skimmer Debris Net

5. (1) 2” Bulkhead tting

6. (1) MPT x Barb tting

7. (1) MPT x Slip PVC tting

8. (1) SS Hose clamps

9. (20) Screws

10. (1) Skimmer®Face Plate

11. (1) Biofall Lip

12. (1) Media Bag

13. (2) Biofall Filter Mat

14. (1) BioFall 1000 Filter

15. (1) DIY Waterfall Foam

16. (1) Silicone

17. (1) Liner

18. (1) Underlayment

19. (1) 25’ x 1½” Kink free pipe

20. (1) AquaSurge Pump

Contents 1

3456

814

www.aquascapeinc.com

Recommended Tools

19 20

☎

CAN 1-866-766-3426 |

☎

US 1-866-877-6637

Wheelbarrow Friends

(optional) Bright Colored

Spray Paint

Screwdrivers Soil Tamper Shovels

Carpenters

Level

Channel

Locks

Scissors

Tape

Measure

Helpful Symbols

Safety Information

WARNING Symbol - Will alert you to the

possibility of damage, injury or death if you do

not comply with the warnings that accompany

them. The hazard may come from something

mechanical or from electrical shock.

TIP Symbol - Helpful information provided by a

professional pond installer.

WARNING: Risk of electric shock

This Product has not been approved for use in

swimming pool or marine areas.

WARNING: To provide continued protection

against risk of electric shock, connect to

properly grounded, ground fault circuit

interrupter (GFCI) outlets only.

• Have a qualiﬁed electrician install a properly grounded receptacle

outlet, acceptable for outdoor use when protected from direct sunlight

snow and rain. If possible locate the outlet so that the power cord will

reach the outlet without an extension cord.

• Inspect cord for damage before using.

• Any wiring of this product should be performed by a qualiﬁed

electrician to ensure code compliance and user safety.

• To reduce risk of electrical shock, all wiring and junction connections

should be made per local codes. Requirements may vary depending

on usage and location.

• The power cable should be protected at all times to avoid punctures,

cuts, bruises and abrasions.

• Never handle power cords with wet hands.

• If an extension cord is required be sure it is rated for outdoor use.

• Unplug pump at receptacle outlet when not in use.

• Do not remove cord and strain relief. Do not connect conduit to

product.

• Do not use power cable to lift the AquaSurge pump.

• Before you start digging make sure you contact your local utility

locating service to avoid damage to utility lines.

www.aquascapeinc.com

Electrical Speciﬁcations - AquaSurge 2000 Pump

• Input Voltage: 120V AC • Input frequency: 60 Hz • 160 Watts

Quick Step Guide

Carefully remove

contents from box

Use garden hose

to outline.

Position the ﬁlters.

Install underlayment

and liner.

Level the excavation.

Select your location.

Fill the pond.

Add rock and gravel.

Naturalize the edges

with mulch and plants.

Dig the hole with

shelves at varying

depths.

☎

CAN 1-866-766-3426 |

☎

US 1-866-877-6637

STEP 1

SELECT & MARK OUT YOUR AREA

• When choosing the location for you new pond, we

recommend putting it near a deck or patio so you can sit

and relax close to your water feature. Also keep in mind

viewpoints from inside the house. Make your pond visible

from a kitchen window or patio door, giving you year round

enjoyment.

• We suggest that you use a garden hose to deﬁne the

shape of your new pond. The hose is ﬂexible, and can be

pushed and pulled in various shapes. Step back, evaluate

and modify your design until you have something that you

really like.

• Pond Kits are available in three sizes (4’x6’, 6’x8’, and

8’x11’). Double check to make sure the length and width of

your layout does not exceed the amount of liner included

with your kit.

• Once you have the

pond shaped and

deﬁned with the

hose, take a can

of brightly colored,

highly visible spray

paint and outline

the shape (around

the hose) on the

grass.

Installation Instructions

www.aquascapeinc.com

STEP 2

PLACE BIOFALL FILTER AND SKIMMER

• The Biofall ﬁlter will be used to create your waterfall and

should be positioned so it’s facing a main viewing area.

• Make sure it is placed close to the edge of the basin so you

can connect the pond liner to the Biofall ﬁlter.

• In order to maximize circulation, the Biofall and Skimmer are

ideally placed on opposite ends of the pond, directly across

from each other. (See Ex. 1)

Ex. 1

STEP 3

LAY PLUMBING

• To eliminate the need for making a trench for the pipe,

lay the kink-free pipe around the perimeter of the pond

basin. This should be completed before you begin your

excavation so the soil you remove from the pond can

cover the kink-free pipe, disguising it from sight.

(See Ex. 2)

Ex. 2

☎

CAN 1-866-766-3426 |

☎

US 1-866-877-6637

STEP 4

HOOK UP AND LEVEL THE BIOFALL

• Install the bulkhead ﬁtting in the opening provided in the

back of the Biofall. The rubber gasket should be located

on the inside of the Biofall. Tighten the nut on the outside

until the rubber gasket begins to bulge. This should only

be approximately one turn past hand-tight. Be careful not

to over tighten the nut, which could possibly crack the

bulkhead. Please note that the bulkhead ﬁtting is reverse

threaded. Turn the nut counterclockwise to tighten! (See

Ex. 3 & 4)

• Now install the barb ﬁtting included with the kit into the

bulkhead ﬁtting. A PVC slip ﬁtting has also been included

in case you are using ﬂexible PVC pipe. Use some of the

silicone, sealant included in your kit, to coat the threads of

the ﬁtting, in order to help provide a watertight seal.

(See Ex. 4)

Nut

Rubber

Gasket

Bulkhead Barb Fitting

Plastic

Washer

Ex. 4

Ex. 3

• Now it’s time to position the Biofall in the desired location.

• The Biofall should be set at or slightly below the grade of

the yard. Simply remove a section of sod or a few inches

of soil in order to create a ﬁrm foundation for the Biofall to

sit.

Design tip - Keep the waterfall to the scale of the yard!

The goal should be to create the perception that

Mother Nature herself has constructed the waterfall.

Avoid creating a “volcanic look” by trying to raise the

Biofall in a ﬂat backyard.

• Be sure to compact the area beneath the MicroFalls®box

using a hand tamper or some other heavy ﬂat object that

can be pounded onto the soil. This will help prevent any

future settling.

• Use a 2’ bubble level in order to make sure your Biofall is

properly set into position. Your Biofall should be level from

www.aquascapeinc.com

Otros manuales para 99763

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Bomba de estanque de AquaScape

AquaScape

AquaScape 75000 Instrucciones de uso

AquaScape

AquaScape DOSING SYSTEM SL Instrucciones de uso

AquaScape

AquaScape 99763 Manual de usuario

AquaScape

AquaScape AQUASURGE 2000 Manual de usuario

AquaScape

AquaScape 17510 Manual de usuario

AquaScape

AquaScape SLD 2000-5000 Instrucciones de uso

AquaScape

AquaScape AQUAFORCE 1000 Manual de usuario

AquaScape

AquaScape AQUAFORCE 4000-8000 Instrucciones de uso

AquaScape

AquaScape EXT 12000 Instrucciones de uso

AquaScape

AquaScape AQUAFORCE 1000 Instrucciones de uso

AquaScape

AquaScape DIY Waterfall Kit Manual de usuario

AquaScape

AquaScape SLD Series Instrucciones de uso

AquaScape

AquaScape EcoWave 2000 Instrucciones de uso

Manuales populares de Bomba de estanque de otras marcas

Oase

Oase PondJet Eco Manual de usuario

Profi-pumpe

Profi-pumpe Rügen Manual de usuario

HEISSNER

HEISSNER F540-00 Manual de usuario

1A Profi Handels

1A Profi Handels OASIS 501R-1 Manual de usuario

Biotop Garden

Biotop Garden D0060 Manual de usuario

Profi-pumpe

Profi-pumpe JR-800LV Manual de usuario

Sealey

Sealey WPP1100 Manual de usuario

Pontec

Pontec PondoMax Eco 1500 Manual de usuario

TIP

TIP WP 500-10 R Manual de usuario

esotec

esotec Siena LED Manual de usuario

Danner

Danner Pondmaster 1250 Manual de usuario

Pond Boss

Pond Boss 52354 Manual de usuario

TeichTip

TeichTip Sunsun Bio Pond Filter Set Manual de usuario

Hozelock Cyprio

Hozelock Cyprio Cascade 5500 Manual de usuario

Hozelock Cyprio

Hozelock Cyprio Aquaforce Series Manual de usuario

HEISSNER

HEISSNER SPF 150-00 Manual de usuario

Messner

Messner system-X 1501 Manual de usuario

Oase

Oase Profimax 20.000 Manual de usuario