www.aquafire.com
Aquafire Pro water vapor fireplace inserts have been designed to be extremely easy to install, simple to
operate, and easy to maintain. When designing your fireplace, feel free to send your plans in for review and
suggestions by our professional design staff.
Considerations:
• Accessibility to electricityand 1/4’’ water line, similar to ice maker in fridge.
• Recessedinto wall, sitting proud of a wall or completely free-standing?
• If light cast upwards to ceiling is undesirable, consider recessing into the wall for a traditional hearth
appearance. (we advise to create a‘light trap’. see Light Trap page for details)
• Determine decorative materials and finishes you expect to use. Since there is no heat, there are virtually no
limitations.
• Plan to make it easy to remove fireplace insert should maintenance or repairs becomenecessary.
• Avoidor prevent air currents from doors, windows, and existing HVAC system which affect flame quality.
Installation:
Prepare the housing for your fireplace insert(s) and make sure the cutout has sharp corners (not rounded)
and dimensions are exactly as specified. These dimensions are critical because the modules are suspended on
flanges that span the opening. Too small, and fireplace will not fit, too large of opening, and fireplace insert will
looksloppy or may even fall through the opening. Using the built in ‘lifting loops’, suspend the Aquafire Pro into
the cutout after plugging in electric power converter(s) and connecting the1/4’’waterline if directplumbed. If
not direct plumbed, fill tank using tap water via the integrated pumping system once installed into cutout.
That’s it!– the installation is complete. Now start your fireplace and enjoy an extraordinary fireplace
experience every day of the year!
World’s most advanced
water vapor fireplace
technology!
Preliminary Planning Information
