Apogee AD-8000 Suplemento

1999 Apogee Electronics Corp AD-8000/ATR/Lynx Page 1of 2

ApplicationNotes

Product: AD-8000

Topic: Analog Tape Recorder/Time Line Synchronizers/PT

Document #: 14

The best way to synchronize your 2” machine to an AD-8000 is to use a synchronizer to act as

master over the 2” transport. In this application note we will discuss the most popular

synchronizers, the Timeline Lynx systems (Lynx I, Lynx II, and Micro Lynx).

Lynx and Lynx II

The idea is to have the Lynx control the 2” transport. The time code from tape is fed into the

Lynx. The TC is then regenerated (referenced to the Lynx’s internal crystal) and output to the

USD. The USD is consequently always receiving fresh TC referenced to a stable crystal source

(the same source that is controlling the ATR transport). Your digital audio won’t suffer from the

inconsistency in speed (wow and flutter) of a “wild” analog tape recorder.

Lynx Setup (the Lynx must have firmware version 5.0 or higher)

DSPL SEL GEN

CODE TYPE for 29.97 non-drop (which is what you should be using) choose NTSC

REF SRC INT XTL (or VIDEO if using Black Burst as master sync)

GEN MODE TACH>TC

GEN ON switch to ON

DSPL SEL READER

2" ATR

LYNX firmware v. 5.0 or higher

LYNX II any firmware version UNIVERSAL SLAVE DRIVER

(for SSD or VSD use SLAVE CLOCK)

PRO TOOLS

APOGEE AD-8000

TRANSPORT

CONTROL

from tape

GEN

OUT

DIGI-8+

MULTIPIN

CABLE

(or Slave Clock)

SYNC SOURCE: WC

(when using Slave

Clock select AMBus

slot w/ Digi-8+ card)

CLOCK REF: LTC

POSITION REF: LTC

AD-8000 Application Notes

1999 Apogee Electronics Corp AD-8000/ATR/Lynx Page 2of 2

TRAN MODE ONLINE

MASTER switch to ON

REF SRC INT XTAL (or VIDEO if using Black Burst as master sync)

Lynx II Setup (any Lynx II software)

DSPL SEL GEN

GEN CODE select which type (29.97)

GEN REF INT

*Press and hold SHIFT and press GEN ON to select TACH > TC

GEN ON switch to ON

DSPL SEL RDR

TRAN MODE ONLINE

MSTR ON

Make sure that the master reference is RDR and not VSO.

The most-recently developed synchronizer from Time Line, the Micro Lynx (with the addition of

the ACG card), can provide a Word Clock output to the AD-8000 and an MTC output directly to

the Pro Tools software via a serial cable to the Mac, effectively acting as the only necessary

synchronizer. The WC output and the regenerated TC output are synchronous providing the

best possible lock to the ATR. While a detailed description of the Micro Lynx setup is beyond the

scope of this note, the Micro Lynx manual has very good application notes describing its use as

an interface to a DAW. Setting up a Micro Lynx without the ACG card is similar to the setups

above with the following notes:

Make sure that the transport setup is not in VSO mode (should be in INT or VIDEO)

Generator output is connected to the USD as above, the analog transport (A, B, C, or D) should be

master.

The time code generator should be slave.

The Micro Lynx with the ACG card can be setup up as follows (sans the USD):

2" ATR

Micro LYNX

PRO TOOLS

APOGEE AD-8000

TRANSPORT

CONTROL

from tape

GEN

OUT

DIGI-8+

MULTIPIN

CABLE

SYNC SOURCE: WC

MTC

Otros manuales para AD-8000

Tabla de contenidos

Otros manuales de Convertidor de medios de Apogee

Apogee

Apogee PSX-100 Manual de usuario

Apogee

Apogee AD-8000 Manual de usuario

Apogee

Apogee AD-500 Manual de usuario

Apogee

Apogee Rosetta 800 Manual de instrucciones

Apogee

Apogee DA-1000E Manual de usuario

Apogee

Apogee Rosetta 200 Guía de referencia rápida

Apogee

Apogee Rosetta 800 Manual de usuario

Apogee

Apogee AD-16X Manual de usuario

Apogee

Apogee AD-8000 Suplemento

Apogee

Apogee Rosetta 200 Manual de usuario

Apogee

Apogee Rosetta AD Manual de usuario

Apogee

Apogee AD-16 Manual de usuario

Apogee

Apogee Rosetta 800 Manual de usuario

Apogee

Apogee DA-16 Manual de usuario

Apogee

Apogee PSX-100 Manual de usuario

Apogee

Apogee Rosetta 200 Manual de usuario

Apogee

Apogee Rosetta AD Manual de usuario

Apogee

Apogee AD-1000 Manual de usuario

Apogee

Apogee AD-8000 Manual de usuario

Apogee

Apogee AC-422 Manual de usuario

Apogee

Apogee AC-421 Manual de usuario

Apogee

Apogee Mini-DAC Manual de usuario

Apogee

Apogee Mini-Me Manual de usuario

Apogee

Apogee DA-2000 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario