Apogee Instruments SQ-212 Manual de usuario

APOGEE INSTRUMENTS, INC. | 721 WEST 1800 NORTH, LOGAN, UTAH 84321, USA

TEL: (435) 792-4700 | FAX: (435) 787-8268 | WEB: APOGEEINSTRUMENTS.COM

OWNER’S MANUAL

QUANTUM SENSOR

Model SQ-212, SQ-222, SQ-215, and SQ-225

(including SS models, formerly smaller)

Owner’s Manual ............................................................................................................................................................................... 1

Certificate of Compliance......................................................................................................................................................... 3

Introduction ............................................................................................................................................................................. 4

Sensor Models ......................................................................................................................................................................... 5

Specifications ........................................................................................................................................................................... 6

Deployment and Installation.................................................................................................................................................... 9

Cable Connectors................................................................................................................................................................... 10

Operation and Measurement ................................................................................................................................................ 11

Maintenance and Recalibration............................................................................................................................................. 17

Troubleshooting and Customer Support................................................................................................................................ 19

Return and Warranty Policy................................................................................................................................................... 21

CERTIFICATE OF COMPLIANCE

EU Declaration of Conformity

This declaration of conformity is issued under the sole responsibility of the manufacturer:

Apogee Instruments, Inc.

721 W 1800 N

Logan, Utah 84321

USA

for the following product(s):

Models: SQ-212, SQ-222, SQ-215, SQ-225

Type: Quantum Sensor

The object of the declaration described above is in conformity with the relevant Union harmonization legislation:

2014/30/EU Electromagnetic Compatibility (EMC) Directive

2011/65/EU Restriction of Hazardous Substances (RoHS 2) Directive

2015/863/EU Amending Annex II to Directive 2011/65/EU (RoHS 3)

Standards referenced during compliance assessment:

EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use –EMC requirements

EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with respect to

the restriction of hazardous substances

Please be advised that based on the information available to us from our raw material suppliers, the products

manufactured by us do not contain, as intentional additives, any of the restricted materials including lead (see

note below), mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), polybrominated

diphenyls (PBDE), bis(2-ethylhexyl) phthalate (DEHP), butyl benzyl phthalate (BBP), dibutyl phthalate (DBP), and

diisobutyl phthalate (DIBP). However, please note that articles containing greater than 0.1% lead concentration are

RoHS 3 compliant using exemption 6c.

Further note that Apogee Instruments does not specifically run any analysis on our raw materials or end products

for the presence of these substances, but rely on the information provided to us by our material suppliers.

Signed for and on behalf of:

Apogee Instruments, August 2020

Bruce Bugbee

President

Apogee Instruments, Inc.

INTRODUCTION

Radiation that drives photosynthesis is called photosynthetically active radiation (PAR) and is typically defined as

total radiation across a range of 400 to 700 nm. PAR is almost universally quantified as photosynthetic photon flux

density (PPFD), the sum of photons from 400 to 700 nm in units of micromoles per square meter per second (µmol

m-2 s-1, equal to microEinsteins m-2 s-1). While microEinsteins and micromoles are equal (one Einstein = one mole of

photons), the Einstein is not an SI unit, so expressing PPFD as µmol m-2 s-1 is preferred. Daily total PPFD is typically

reported in units of moles of photons per square meter per day (mol m-2 d-1) and is often called daily light integral

(DLI).

The acronym PPF is also used and refers to the photosynthetic photon flux. The acronyms PPF and PPFD refer to

the same variable. Both terms are used because there is not a universal definition of the term flux. Flux is

sometimes defined as per unit area per unit time and sometimes defined as per unit time only. PPFD is used in this

manual.

Sensors that measure PPFD are often called quantum sensors due to the quantized nature of radiation. A quantum

refers to the minimum quantity of radiation, one photon, involved in physical interactions (e.g., absorption by

photosynthetic pigments). In other words, one photon is a single quantum of radiation.

Typical applications of quantum sensors include measurement of incident PPFD on plant canopies in outdoor

environments or in greenhouses and growth chambers, and reflected or under-canopy (transmitted) PPFD

measurement in the same environments.

Apogee Instruments SQ series quantum sensors consist of a cast acrylic diffuser (filter), photodiode, and signal

processing circuitry mounted in an anodized aluminum housing, and a cable to connect the sensor to a

measurement device. Sensors are potted solid with no internal air space, and are designed for continuous PPFD

measurement in indoor or outdoor environments. SQ series sensors output an analog voltage that is directly

proportional to PPFD under sunlight (e.g., model SQ-215) or electric lights (e.g., model SQ-225). The voltage signal

from the sensor is directly proportional to radiation incident on a planar surface (does not have to be horizontal),

where the radiation emanates from all angles of a hemisphere.

SENSOR MODELS

This manual covers quantum sensor models SQ-212/SQ/222 and SQ-215/SQ-225, which provide a voltage signal.

Additional models are covered in their respective manuals.

Model

Signal

Calibration

SQ-212

0-2.5 V

Sunlight

SQ-222

0-2.5 V

Electric light

SQ-215

0-5 V

Sunlight

SQ-225

0-5 V

Electric light

SQ-110

Self-powered

Sunlight

SQ-120

Self-powered

Electric light

SQ-214

4-20 mA

Sunlight

SQ-224

4-20 mA

Electric light

SQ-311

Self-powered

Sunlight

SQ-321

Self-powered

Electric light

SQ-313

Self-powered

Sunlight

SQ-323

Self-powered

Electric light

SQ-316

Self-powered

Sunlight

SQ-326

Self-powered

Electric light

SQ-420

USB

Sunlight and Electric light

SQ-421

SDI-12

Sunlight and Electric light

SQ-422

Modbus

Sunlight and Electric light

Serial Number 0-10573 (SQ-212), 0-10273 (SQ-

222), 0-10433 (SQ-215), 0-10533 (SQ-225) Sensor

model number and serial number are located

near the pigtail leads on the sensor cable. If you

need the manufacturing date of your sensor,

please contact Apogee Instruments with the

serial number of your sensor.

Serial Numbers 10574 (SQ-212), 10274 (SQ-

222), 10434 (SQ-215), 10534 (SQ-225) and

above: Sensor model number and serial number

are located on the bottom of the sensor. If you

need the manufacturing date of your sensor,

please contact Apogee Instruments with the

serial number of your sensor.

SPECIFICATIONS

SQ-212/SQ-222-SS

SQ-215/SQ-225-SS

Power Supply

3.3 to 24 V DC; nominal current draw 300 µA

5.5 to 24 V DC**; nominal current draw 300 µA

**Sensors with a serial number smaller than 3762 should

not be powered with more than 5 V DC

Sensitivity

Serial # 8382 and above

0.6 mV per µmol m-2 s-1

1.25 mV per µmol m-2 s-1

Sensitivity

Serial # 0-8381

1 mV per µmol m-2 s-1

2 mV per µmol m-2 s-1

Calibration Factor

Serial # 8382 and above

1.6 µmol m-2 s-1 per mV

0.8 µmol m-2 s-1 per mV

Calibration Factor

Serial # 0-8381

1µmol m-2 s-1 per mV

0.5 µmol m-2 s-1 per mV

Calibrated Output Range

0 to 2.5 V

0 to 5 V

Calibration Uncertainty

± 5 % (see Calibration Traceability below)

Measurement Repeatability

Less than 0.5 %

Long-term Drift

(Non-stability)

Less than 2 % per year

Non-linearity

Serial # 8382 and above

Less than 1 % (up to 4000 µmol m-2 s-1;

maximum PPFD measurement is 4000 µmol m-2 s-1)

Non-linearity

Serial # 0-8381

Less than 1 % (up to 2500 µmol m-2 s-1;

maximum PPFD measurement is 2500 µmol m-2 s-1)

Response Time

Less than 1 ms

Field of View

180°

Spectral Range

410 to 655 nm (wavelengths where response is greater than 50 % of maximum; see Spectral

Response below)

Spectral Selectivity

Less than 10 % from 469 to 655 nm

Directional (Cosine) Response

± 5 % at 75° zenith angle (see Cosine Response below)

Temperature Response

0.06 ± 0.06 % per C (see Temperature Response below)

Operating Environment

-40 to 70 C; 0 to 100 % relative humidity; can be submerged in water up to depths of 30 m

Dimensions

Serial # 10574 (SQ-212), 10274

(SQ-222), 10434 (SQ-215),

10534 (SQ-225) and above

30.5 mm diameter, 37 mm height

Dimensions

Serial # 0-10573 (SQ-212), 0-

10273 (SQ-222), 0-10433 (SQ-

215), 0-10533 (SQ-225)

24 mm diameter, 33 mm height

Mass (with 5 m cable)

Serial # 10574 (SQ-212), 10274

(SQ-222), 10434 (SQ-215),

10534 (SQ-225) and above

140 g

Mass (with 5 m cable)

Serial # 0-10573 (SQ-212), 0-

10273 (SQ-222), 0-10433 (SQ-

215), 0-10533 (SQ-225)

100 g

Cable

5 m of two conductor, shielded, twisted-pair wire; TPR jacket (high water resistance, high UV

stability, flexibility in cold conditions); pigtail lead wires; stainless steel (316), M8 connector

Calibration Traceability

Apogee SQ series quantum sensors are calibrated through side-by-side comparison to the mean of transfer

standard quantum sensors under a reference lamp. The reference quantum sensors are recalibrated with a 200 W

quartz halogen lamp traceable to the National Institute of Standards and Technology (NIST).

Spectral Response

Temperature Response

Mean temperature response of eight

SQ-100 series quantum sensors (errors

bars represent two standard deviations

above and below mean). Temperature

response measurements were made at 10

C intervals across a temperature range of

approximately -10 to 40 C in a

temperature controlled chamber under a

fixed, broad spectrum, electric lamp. At

each temperature set point, a

spectroradiometer was used to measure

light intensity from the lamp and all

quantum sensors were compared to the

spectroradiometer. The

spectroradiometer was mounted external

to the temperature control chamber and

remained at room temperature during the

experiment.

Mean spectral response of six SQ-100

series quantum sensors (error bars

represent two standard deviations

above and below mean) compared to

defined plant response to photons.

Spectral response measurements were

made at 10 nm increments across a

wavelength range of 300 to 800 nm with a

monochromator and an attached electric

light source. Measured spectral data from

each quantum sensor were normalized by

the measured spectral response of the

monochromator/electric light

combination, which was measured with a

spectroradiometer.

Cosine Response

Mean directional (cosine) response of six

apogee SQ-100 series quantum sensors.

Directional response measurements

were made on the rooftop of the

Apogee building in Logan, Utah.

Directional response was calculated as

the relative difference of SQ-500

quantum sensors from the mean of

replicate reference quantum sensors (LI-

COR models LI-190 and LI-190R, Kipp &

Zonen model PQS 1). Data were also

collected in the laboratory using a

reference lamp and positioning the

sensor at varying angles.

Directional (cosine) response is defined as the

measurement error at a specific angle of

radiation incidence. Error for Apogee SQ-100

series quantum sensors is approximately ± 2 %

and ± 5 % at solar zenith angles of 45° and 75°,

respectively.

DEPLOYMENT AND INSTALLATION

Mount the sensor to a solid surface with the nylon mounting screw provided. To accurately measure PPFD incident

on a horizontal surface, the sensor must be level. An Apogee Instruments model AL-100 Leveling Plate is

recommended to level the sensor when used on a flat surface or being mounted to surfaces such as wood. To

facilitate mounting on a mast or pipe, the Apogee Instruments model AL-120 Solar Mounting Bracket with Leveling

Plate is recommended.

To minimize azimuth error, the sensor should be mounted with the cable pointing toward true north in the

northern hemisphere or true south in the southern hemisphere. Azimuth error is typically less than 1 %, but it is

easy to minimize by proper cable orientation.

In addition to orienting the cable to point toward the nearest pole, the sensor should also be mounted such that

obstructions (e.g., weather station tripod/tower or other instrumentation) do not shade the sensor. Once

mounted, the green cap should be removed from the sensor. The green cap can be used as a protective covering

for the sensor when it is not in use.

Nylon Screw: 10-32x3/8

Model AL-100

Model AL-120

Important: Only use the nylon screw provided

when mounting to insulate the non-anodized

threads of the aluminum sensor head from the

base to help prevent galvanic corrosion. For

extended submersion applications, more insulation

may be necessary. Contact Apogee tech support for

details.

CABLE CONNECTORS

Apogee started offering cable connectors on some

bare-lead sensors in March 2018 to simplify the

process of removing sensors from weather stations

for calibration (the entire cable does not have to be

removed from the station and shipped with the

sensor).

The ruggedized M8 connectors are rated IP68, made

of corrosion-resistant marine-grade stainless-steel,

and designed for extended use in harsh

environmental conditions.

Cable connectors are attached directly to the head.

Instructions

Pins and Wiring Colors: All Apogee connectors have

six pins, but not all pins are used for every sensor.

There may also be unused wire colors inside the cable.

To simplify connection to a measurement device, the

unused pigtail lead wire colors are removed.

If a replacement cable is required, please contact

Apogee directly to ensure ordering the proper pigtail

configuration.

Alignment: When reconnecting a sensor, arrows on

the connector jacket and an aligning notch ensure

proper orientation.

Disconnection for extended periods: When

disconnecting the sensor for an extended period of

time from a station, protect the remaining half of the

connector still on the station from water and dirt with

electrical tape or other method.

A reference notch inside the connector ensures

proper alignment before tightening.

When sending sensors in for calibration, only send the

sensor head.

Tightening: Connectors are designed to be firmly

finger-tightened only. There is an o-ring inside the

connector that can be overly compressed if a wrench is

used. Pay attention to thread alignment to avoid cross-

threading. When fully tightened, 1-2 threads may still

be visible.

WARNING: Do not tighten the connector by twisting

the black cable or sensor head, only twist the metal

connector (yellow arrows).

Finger-tighten firmly

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de Apogee Instruments

Apogee Instruments

Apogee Instruments PAR-FAR Manual de usuario

Apogee Instruments

Apogee Instruments SQ-514 Manual de usuario

Apogee Instruments

Apogee Instruments S2-431 Manual de usuario

Apogee Instruments

Apogee Instruments SQ-647 Manual de usuario

Apogee Instruments

Apogee Instruments SQ-626 Manual de usuario

Apogee Instruments

Apogee Instruments S2-441 Manual de usuario

Apogee Instruments

Apogee Instruments SQ-616 Manual de usuario

Apogee Instruments

Apogee Instruments SQ-620-SS Manual de usuario

Apogee Instruments

Apogee Instruments SQ-422 Manual de usuario

Apogee Instruments

Apogee Instruments SU-300-SS Manual de usuario

Apogee Instruments

Apogee Instruments SQ-420X Manual de usuario

Apogee Instruments

Apogee Instruments SQ-500 Manual de usuario

Apogee Instruments

Apogee Instruments SQ-644 Manual de usuario

Apogee Instruments

Apogee Instruments S2-111 Manual de usuario

Apogee Instruments

Apogee Instruments SQ-421 Manual de usuario

Apogee Instruments

Apogee Instruments S2-442 Manual de usuario

Apogee Instruments

Apogee Instruments SQ-214 Manual de usuario

Apogee Instruments

Apogee Instruments SU-202 Manual de usuario

Apogee Instruments

Apogee Instruments SQ-640 Manual de usuario

Apogee Instruments

Apogee Instruments SU-100 Manual de usuario

Apogee Instruments

Apogee Instruments SU-221 Manual de usuario

Apogee Instruments

Apogee Instruments SQ-624 Manual de usuario

Apogee Instruments

Apogee Instruments SQ-620 Manual de usuario

Apogee Instruments

Apogee Instruments SU-321 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario