Aplex AEx-2410 Manual de usuario

AEx-2410

Stainless steel BOX PC for Hazardous Locations

ATEX/IECEX/CID2 Certified BOX PC

User Manual

Release Date Revision

May. 2018 V1.2

Aplex Technology, Inc.

15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan

Tel: 886-2-82262881 Fax: 886-2-82262883 URL: http://www.aplextec.com/zh/home.php

AEx-2410 User Manual

Revision History

Reversion

Date

Description

0.1

2017/11/24

For Preliminary Release

1.0

2018/01/02

Official version

1.1

2018/03/27

Modify power pin defined

1.2

2018/05/16

Modify power pin description

AEx-2410 User Manual

Warning!___________________________

This equipment generates, uses and can radiate radio frequency energy and if

not installed and used in accordance with the instructions manual, it may

cause interference to radio communications. It has been tested and found to

comply with the limits for a Class A computing device pursuant to FCC Rules,

which are designed to provide reasonable protection against such interference

when operated in a commercial environment. Operation of this equipment in

a residential area is likely to cause interference in which case the user at his

own expense will be required to take whatever measures may be required to

correct the interference.

Disclaimer

This information in this document is subject to change without notice. In no event

shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or

consequential, arising from either the use or misuse of information in this

document or in any related materials.

Electric Shock Hazard –Do not operate the machine with its back cover

removed. There are dangerous high voltages inside.

AEx-2410 User Manual

ATEX Instruction Guide

SAFETY INSTRUCTIONS

Read these instructions carefully, and look at the equipment to become familiar with

the device before trying to install, operate, or maintain it. The following special

messages may appear throughout this documentation or on the equipment to warn

of potential hazards or to call attention to information that clarifies or simplifies a

procedure.

PLEASE NOTE

Electrical equipment should be installed, operated, serviced, and maintained only by

qualified personnel. No responsibility is assumed by Digital Electronics Corporation

for any consequences arising out of the use of this material. A qualified person is one

who has skills and knowledge related to the construction and operation of electrical

equipment and its installation, and has received safety training to recognize and

avoid the hazards involved.

SCOPE

This present document applies when AEx-2410 bears marking. They are

supplied only with DC 9~36 V. This documentation has to be kept and always refer to

those instructions for installation, operation, maintenance or evolution of your

system.

Permitted zones of application

Refer to the section titled "Markings" to get information about the permitted zones

of protection and the types of protection.

•AEx-2410 is installed in zones 2 hazardous areas must be certified and bear the

marking.

•Ensure with the marking that the terminals are compatible with the conditions

permitted for the hazardous area at the site where it is being used.

This is the safety alert symbol. It is used to alert you to potential personal injury

hazards. Obey all safety messages that follow this symbol to avoid possible injury

or death.

AEx-2410 User Manual

Notice

1. Under certain extreme circumstances, the label may generate an

ignition-capable level of electrostatic charge. Therefore the equipment shall not

be installed in a location where the external conditions are conducive to the

build-up of electrostatic charge on the label. In addition, the label shall only be

cleaned with a damp cloth.

2. Warning –in locations where high external humidity and internal temperature

variations (e.g. frequent on-off cycles) may cause condensation inside the

equipment, the interior should be periodically inspected.

3. When the device is mounted in a hazardous area, connection and

disconnection of external connectors while live is only permitted if the potentially

explosive atmosphere is shown to be absent.

4. The “9-36” Vdc rated supply shall be protected such that transients are limited

to a maximum of 119 V; no such protection is required for the signal lines.

5. Equipotential bonding facilities on the outside of enclosure are assessed as

providing effective connection of a conductor with a cross-sectional area of at least

4 mm2, 10AWG, 600V wire

6. The equipment is suitable for use in class I, division 2, groups A, B, C, D OR

non-hazardous locations only.

7. Warning- Do not use USB while the circuit is live unless the area is known to

be non-hazardous.

Markings

ATEX and markings, applied to the AEx-2410 Graphic Operator Interface, are as

follows:

AEx-2410

WARNING: Do not disconnect while circuit is live. Potential

electrostatic charges. Wipe the front panel of the terminal with a

damp cloth before turning on.

II 3G Ex nA IIC T4 Gc and CID2 IP66

Temperature < 135°C

Power Input Voltage: DC 9~36V

TUV 15 ATEX 7701 X

IECEx TUR 16.0008X

AEx-2410 User Manual

Table of Contents

Revision History…………………………………………………………………………………………………….1

Warning!/Caution………………..……………...................................…………………………….…2

Packing List…………………………………….……………………………………………………………………..3

Safety Precautions…………………………………………………………………….…..……………………..4

Chapter 1 Getting Started

1.1 Features………………………..………………………...…………………………..7

1.2 Specifications…………………...………………………………………………….7

1.3 Dimensions………………………....…………………………………………..….9

1.4 Brief Description of AEx-2410……….……………………….……….…10

1.5 VESA mounting and Wall mounting………………….….……….……11

Chapter 2 Hardware

2.1 Motherboard Introduction……………………...……………..………....12

2.2 Specifications…………………………..…………………………………………12

2.3 Jumpers and Connectors Location……………………………………...16

2.4 Jumpers Setting and Connectors…………………………………..……17

Chapter 3 BIOS Setup

3.1 Operations after POST Screen…...…….……...…………………………32

3.2 BIOS Setup Utility……………………………………………………………….32

3.3 Main Settings……………………………………..………………………………33

3.4 Advanced Settings……………………………………………………………...34

3.5 Chipset Settings……………………………………….………………………...42

3.6 Security Settings…………………………………………….…………………..44

3.7 Boot Settings…..………………………………………….……………………..45

3.8 Save & Exit Settings……………………………………..…………………....46

Chapter 4 Installation of Drivers

4.1 Intel (R) AtomTM SoC Chipset ………..……...………….………………49

4.2 Intel (R) VGA Chipset……………………………………………….……......52

4.3 Realtek ALC662 HD Audio Driver Installation…….……..………...56

4.4 Com Driver………………………………….…………..……...……..………...58

4.5 Intel_TXE(Win) Driver……………………………………...……..………...60

AEx-2410 User Manual

Figures

Figure 1.1: Dimensions of AEx-2410……..…………….…………..……………….....9

Figure 1.2: Overview of AEx-2410.………..…………..…………………….…….….10

Figure 1.3: VESA mount of AEx-2410………………….…………………….…….….11

Figure 1.4: Wall mount of AEx-2410……………………..…………………….…….11

Figure 2.1: Motherboard Dimensions………………………………………….…….15

Figure 2.2: Jumpers and Connectors Location-Board Top……………….….16

Figure 2.3: Jumpers and Connectors Location-Board Bottom…………..…16

AEx-2410 User Manual

Chapter 1 Getting Started

1.1 Features

Intel® Celeron Processor N2930

WLAN for Option

Full IP66 grade with M12 waterproof connector

DC 9~36V wide range power input

Support VESA and Wall mounting

316 Stainless steel design

1.2 Specifications

AEx-2410

System

CPU

Onboard Intel Celeron N2930 1.83GHz Processor

Chipset

SoC

Memory

Onboard 4GB DDR3L (8GB for option)

IO Port

USB

1 x M12 for 2 x USB2.0 with metal waterproof CAP

Serial/Parallel

1 x M12 for COM1—RS-232(RS-422/485 for option) with metal waterproof CAP

LAN

2 x M12 for LAN with metal waterproof CAP

VGA

1 x M12 for VGA with Metal Waterproof CAP

Power

1 x M12 for DC power input with metal waterproof CAP

Optional IO Port (Must be replacement for standard I/O)

USB

1 x M12 for 2 x USB2.0 with metal waterproof CAP

1 x M12 for 1 x USB3.0 with metal waterproof CAP

Serial/Parallel

1 x M12 for 1x RS-232 with metal waterproof CAP

Storage Space

Storage

1 x 2.5” SATA HDD or SSD space

1 x Internal SD Card slot on board

Expansion

1 x Mini PCIe full size slot (For option WLAN/BT module)

Power

Power Input

DC 9~36V

Power Consumption

MAX: 15.9W

AEx-2410 User Manual

Mechanical

Construction

316 Stainless Steel Chassis

Mounting

VESA Mount 100 x100

Wall Mount

Dimension (mm)

334 x 195 x 38.5mm

Net Weight (Kg)

4 kg

Environmental

Operating

temperature

-20~60°C

Storage temperature

-30~70°C

Storage humidity

10 to 90% @ 40°C, non- condensing

Altitude limit for

application

Under 2000m

Overvoltage

Manuales populares de PC industrial de otras marcas

Chipsee

Chipsee PPC-A72-101 Manual de usuario

Advantech

Advantech UNO-2184G Manual de usuario

MSI

MSI MS-9A76 Manual de usuario

Stackrack

Stackrack THOR200 Manual de usuario

Moxa Technologies

Moxa Technologies DA-682C Series Manual de usuario

Nodka

Nodka eBOX-3000-ETC Manual de usuario

Siemens

Siemens SIMATIC IPC627E Manual de usuario

MSI

MSI MS-9A89 Manual de usuario

Artila

Artila Matrix-516 Manual de usuario

Siemens

Siemens SIMATIC Rack PC 840 V2 Manual de usuario

Advantech

Advantech IPPC-6152A Manual de usuario

Beckhoff

Beckhoff CX9020 Manual de usuario

Dell

Dell Embedded Box PC 5000 Manual de usuario

IBASE Technology

IBASE Technology ASB200-918 Series Manual de usuario

Lenovo

Lenovo ThinkCentre M90q Manual del propietario

IXXAT

IXXAT Econ 100 Manual de usuario

Kontron

Kontron KBox A-151-TGL Manual de usuario

AXIOMTEK

AXIOMTEK ICO500-518 Series Manual de usuario