Anymode TV SOLODIO Manual de usuario
User Guide
Wireless TV Audio Transceiver
Thank you for purchasing this wireless TV Midnight Sound.
Please read this User Manual carefully before using the machine.
TV Solodio
18
Table of Contents
SAFETY TIPS .................................. 19
COMPONENTS................................ 21
PORTS AND BUTTONS .................. 22
Transmitter (Tx) .......................................22
Receiver (Rx)...........................................22
OPERATION ................................... 23
Connecting ..............................................23
Charging .................................................26
USING .............................................. 27
Volume control .........................................27
Setting 3D-sound effect ...........................27
Mute.........................................................28
Restarting ................................................28
TROUBLESHOOTING..................... 29
SPECIFICATIONS ........................... 31
WARRANTY .................................... 32
19
Safety Tips
Be sure to comply with the following advice to
prevent danger or property damage by using your
TV Midnight sound as advised.
Warning
No compliance with the following advice may cause
the risk of death or serious injuries.
Be careful not to allow water, beverages or
chemicals to flow into the device.
•It may cause electric shocks, fire or device
damage.
Install the device in a place with no heat, for
example, heaters.
•Overheating may cause fire or electric shocks.
Do not leave the power adapter or the cable in
passageways.
•It may cause device damages and injuries.
Use a charger of which the safety is approved
•Non-approved chargers may cause electric
shocks, fire or device damage.
Keep the packaging materials (desiccant,
plastic materials) out of reach of children.
•The packaging materials may cause injuries or
suffocation.
Do not listen to high-volume sound for a long
period of time.
•It may cause hearing disorders.
20
Safety Notice
Non-compliance with the advice may cause minor
injuries or device damage.
Do not leave the device next to an object with
strong electromagnetic waves or magnetic
properties.
•It may cause malfunction or failures, and reduce
the service life of the device.
Wipe the outside of the device with a dry soft
cloth and do not use benzene or alcohol for
cleaning.
•It may cause device deformation.
Do not drop the device or do not give shocks to
the device.
•It may cause failures of the device.
Do not dissemble, repair or alter the device.
•It may cause damage or failures of the device.
Do not place heavy objects on top of the
device.
•It may cause damage or failures of the device.
Disconnect the power adapter in lightning
strikes or if the device is not used for a long
period of time.
•It may cause damage or failures of the device.
21
Components
Audio
Transmitter
Audio
Receiver
User Guide
AUX Cable Micro USB
Charging Cable
(2EA)
Cable tie
Earphone Eartips
(S, L)
Optical cable
(Rectangle /
Circle Type)
(optional)
Notice
•Device information may change without
prior notice.
•The optical cable is optional, and you
can buy it if required.
•To use the optical cable, set the optical
output of your TV as PCM mode for
normal sound output. Be sure to check
PCM mode compatibility of the TV before
using the cable. (Do not support DOLBY
and DTS from.)
22
Ports and Buttons
Transmitter (Tx)
Status LED
Pairing button
Mini(3.5Φ) stereo
optical input port
Micro USB port
Receiver (Rx)
Earphone output port
Clip
Sound effect setting /
mute button
Status LED
Volume button /
pairing button
Power
Micro USB port
Reset hole
23
Operation
Connecting
1Use the USB cable to connect the USB port
of your TV with the micro USB port of the
transmitter.
2Use an analog or digital connection cable to
connect the input port of the transmitter with
the TV output port.
3Press the power button on the receiver to
supply power.
24
4Connect the earphone cable with the earphone
output port.
•Enjoy TV sound.
Notice
•While power is ON, press the power
button for at least 2 seconds to turn it off.
5Press both the pairing button of the
transmitter and the paring button of the
receiver (-/+) for at least 2 seconds at the
same time to carry out pairing, if no sound is
heard from the earphone although the USB
cable power is connected to the transmitter.
ReceiverTransmitter
25
•Replay automatically starts when pairing
finishes.
•Automatic connection is conducted when
first pairing is completed after device
connection.
•Check LED colors to identify pairing.
State Device for
indication LED
Pairing
between
receiver and
transmitter
Transmitter Red LED
blinking
Receiver
Fast LED
blinking
alternately
between red
and blue
LEDs
Pairing
completed
between
receiver and
transmitter
Transmitter Red
Receiver
blue LED
blinking every
1 second
Caution
•Set the optical output of your TV as PCM
for normal sound while using the optical
cable.
•Receiver power is automatically off when
pairing is unsuccessful for 3 minutes
after power is on or pairing is released.
•The device already paired cannot be
connected with other devices. Carry out
pairing for connection with other devices.
26
Charging
Connect the USB port of your PC or general
adapter with the micro USB port on the receiver
through the enclosed USB cable for charging.
•You can charge the device by connecting the
micro USB port of any charging adapter for
Android smartphones with the micro USB port
on the receiver.
•Check receiver charging with LED color.
State LED
Receiver charging Red
Receiver charging
completed Blue
Low receiver battery
level
Red LED blinking every
1 seconds
Tabla de contenidos
Manuales populares de Sistema de altavoces de otras marcas
Sondpex
Sondpex Active Speaker System and Digital Music... Manual de usuario
JVC
JVC NX-PN7 Manual de usuario
Marshall Amplification
Marshall Amplification AR-DM61-BT Manual de usuario
Yamaha
Yamaha NX-A01 - Speaker Sys Manual de usuario
SE Audiotechnik
SE Audiotechnik I-LINE Manual de usuario
Gemini
Gemini WRX-843 Series Manual de usuario