Anviz A Series Manual de usuario
www.anviz.co.uk
Fingerprint Employee Time Clock
User Guide (V1.0)
2
Feature
USA TI 300MHz high speed processor
USA BioNano core fingerprint algorithm of high speed and stability
New generation fully sealed, waterproof and dustproof fingerprint sensor
User name display and human voice prompt
Realtime data transfer and WEB online tracking
A20: Standard USB, USB pen drive
A300: Standard USB, USB pen drive and TCP/IP
Identification method: FP, ID+FP, ID+PW,
Fingerprint capacity: 2000
Record capacity: 50000
Identification speed: <0.5 second
Size: 200mm(w)*140mm(h)*38mm(d)
3
Content
Safety Precautions.................................................................4
Glossary.................................................................................5
Illustration for placing fingerprint............................................6
Packing List............................................................................7
Appearance............................................................................8
System Menu.........................................................................11
User--Enroll(Fingerprint).........................................................14
User--Enroll(Password)..........................................................15
User--Enroll(Card)..................................................................16
User--Delete...........................................................................17
User--Verify Mode..................................................................18
User--Admin Setup.................................................................19
User--Admin Clear..................................................................20
Setup--System........................................................................22
Setup--System--Net................................................................24
Setup--Log Setup...................................................................25
Setup--Hardware Test............................................................26
USB Flash--Record Backup...................................................28
USB Flash--User Backup/Recovery.......................................29
System Info............................................................................30
4
Safety Precautions
Please read it carefully first of all;
Don’t install the terminal under direct light, humid, dusty or dirty environments;
Don’t install the terminal near the magnetic field;
Don’t install the terminal near the heating device;
Don’t sprinkle liquids (water, drink, chemical) on the terminal;
Always keep the surface of the terminal clean;
Clear the terminal with a towel when there is water on the surface;
Don’t break the terminal;
Don’t press two keys at the same time;
Don’t take down, repair or change the terminal without authorization;
Don’t allow children to touch the terminal;
This terminal is only used for fingerprint verification, don't use it for other purposes;
If in doubt please contact the local distributor;
名词解释Interpretation for items and phrases
Administrator
It is a special user who has the authorizations of setting the terminal system settings and user information.
The admin can add or delete the users, and the admin also can change the system settings of the terminal.
1:1 Identification
If it is 1:1 identification mode, the user has to input the user ID firstly, then verify the fingerprint or enter the password to
make identification.
In this mode,the fingerprint sensor on the fingerprint template will identify with the one of the special user ID.
1:N Identification
Under 1:N mode,the user need not enter any user ID. Just need place the fingerprint on the fingerprint sensor .
The terminal will automatically identify this fingerprint with the ones of all users registered in inside database.
Fingerprint Enrollment
It is the process to capture the fingerprint image features got from the fingerprint sensor and save the inside memory into
the terminal.
5
Glossary
Place finger in the center of the sensor.Place finger flatly and smoothly on the sensor.
Move finger before the
backlight of sensor is off.
Place finger away from
the center of the sensor.
Tilt sensor.
Correct method:
Straighten finger and place it flatly on the sensor, and make the fingerprint maximally cover the sensor.
Incorrect method:
Slide finger during the process
of fingerprint verification.
Take off finger during the
process of fingerprint verification.
Use fingertip.
6
Illustration for placing fingerprint
A Series Fingerprint Empoyee Time Clock USB Cable (1.5 meters) USB Power Adapter
Software CD Quick Guide
COMPACT
CD-ROM
EN CH
Copyright Bio-office All rights reserved.
http://cn.bio-office.com
windows
FOR
Your Time Attendance Expert
Windows 98
Windows 2000
Windows XP
Windows Vista
Windows 7
7
Packing List
8
Appearance
State Key(Clock In)/Page Up
State Key(Clock Out)/Page Down
WorkCode Setup Key
LCD
LED
Fingerprint Sensor
Menu Key
Enter the System Management menu
Speaker
Operation with voice prompts
Cancel Key
Exit/Cancel the present operation
Confirm/Power Key
Confirm the present operation/Power On/Off key
0~9 Num. Keys
To enter employee ID or password
Front
Flash Disk Port
9
Appearance
Network connection
USB / 5 Volt Power Connection
Back
For Administrator——Basic Functions
Manage employees' information.
Main functions:
Register users, delete users,
add/delete admin and so on.
10
Otros manuales para A Series
2
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Manuales populares de Panel táctil de otras marcas
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manual de usuario
YASKAWA
YASKAWA TP 610C Manual de usuario
B&R
B&R Power Panel C Series Manual de usuario
Beijer Electronics
Beijer Electronics X2 control Manual de usuario
AXIOMTEK
AXIOMTEK GOT321W-521 Manual de usuario
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manual de usuario
