Anker Nebula Capsule 3 Laser Manual de usuario
User Manual
Nebula Capsule 3 Laser
Nebula Capsule 3 Laser
Model: D2426
EN
01
Table of Contents
Important Safety Instructions 02
What's Included 06
At a Glance 07
1. Projector 07
2. Remote Control 11
3. LED Light Guide 12
Getting Started 13
1. Prepare the Remote 13
2. Position Your Projector 13
3. Charge Your Projector 15
4. Power On / Off 15
5. Auto Focus and Keystone 16
6. Setup 16
Nebula Connect App 17
Settings 17
1. Network 17
2. Projector 18
3. Apps 21
4. Device Preferences 21
5. Others 22
Using Your Projector 23
1. Select an App 23
2. Voice Assistant 23
3. Wireless Screen Mirroring 23
4. Play from HDMI Playback Devices 24
5. Play from a USB Drive 25
6. Play Through External Sound Devices 26
7. Bluetooth Speaker Mode 26
System Update 27
Specifications 27
Troubleshooting 29
Notice 32
Trademarks 35
Warranty 36
EN
02
Important Safety Instructions
Read all instructions before you use this product. Do not make any
changes or create settings that are not described in this manual. If
physical injury, loss of data, or damage is caused by failure to follow
instructions, the warranty does not apply.
Setup
• Do not use the product in any way other than described herein in
order to avoid personal injury or property damage.
• To reduce the risk of fire and/or electric shock, do not expose the
product to rain or moisture. Objects filled with liquids, such as
vases, should not be placed on this product.
• Do not place this product on soft surfaces such as tablecloths or
carpets, otherwise the product could be a fire hazard.
• Do not place this product in areas susceptible to excessive dust and
dirt or near any appliance generating a strong magnetic field.
• To prevent overheating, do not block or clog the ventilation
openings.
• Never place this product in a confined space. Always leave enough
space around this product for ventilation.
• Do not use the product in an environment where the temperature is
too high or too low. Never expose the product to strong sunshine or
wet environments.
• When this product is running for a long period of time, the surface
may become hot. If this occurs, shut it down immediately and
unplug the charger. Resume operation after the product has cooled
down.
• Always handle this product with care. Avoid touching the lens.
• Do not allow children to handle the product without supervision.
• Do not place heavy or sharp objects on this product.
• To avoid electric shock, do not disassemble the product.
• Avoid extreme vibrations as they may damage the internal
components.
• Please ensure you use only the adapter offered by the manufacturer.
EN
03
Using unauthorized adapters may cause danger and violate the
authorization of the product and the guarantee article.
• User should comply with the laws and regulations of the
corresponding countries and regions where the equipment is
located (used), abide by professional ethics, pay attention to
safety obligations, and strictly prohibit the use of our products
or equipment for any illegal purposes. Our company will not be
responsible for any violators' legal liability under any circumstances.
Power Supply
• It is recommended to supply the product in an environment with a
temperature that ranges from 5°C~25°C / 41°F~77°F.
• When supplying power, place the device in an environment that has
a normal room temperature and good ventilation.
Hearing Safety
• To prevent hearing damage, do not listen for extended periods at
high volume. Set the volume to a safe level.
Charging
• The adapter is for indoor use only.
• The adapter should be installed near the product and should be
easily accessible.
• Due to the enclosure material, the product must only be connected
to a USB 2.0 or higher.
• When charging, place this device in an environment that has a
normal room temperature (5°C~25°C / 41°F~77°F) and good
ventilation.
Battery
• The remote control contains batteries, which are a choking hazard.
Keep the remote control out of the reach of children.
• Remove the batteries when the remote control has not been used
for a long period of time.
EN
04
• Replace the remote control batteries only with the same or an
equivalent type.
• Batteries contain chemical substances and they should be disposed
of properly.
• Charge this device regularly. Do not store this device with a
completely discharged battery.
Warning
• Replacing a battery with an incorrect type may defeat safeguards
and create danger;
• Disposal of the battery / device in a fire or a hot oven or other
source of significant heat, or mechanically crushing, or cutting of
the battery / device, may result in an explosion;
• Leaving the battery / device in an extremely hot environment may
result in an explosion or leakage of flammable liquids or gases;
• The battery / device subjected to extremely low air pressure may
result in an explosion or leakage of flammable liquids or gases.
Cleaning
• Use a soft, lint-free cloth. Never use liquid, gaseous, or easily
flammable cleansers to clean.
• Do not use any liquid cleaning agents to clean the lens to avoid
damaging the film coating on the lens.
• Wipe surfaces gently. Be careful that you do not scratch the surface.
• Use lens cleaning paper to clean the lens.
Repairs
• Do not make any repairs to this product yourself.
• Improper maintenance can result in injuries or product damage.
• Refer all servicing to qualified service personnel.
EN
05
Caution
• Possibly hazardous optical radiation emitted from this product may
be harmful to eyes.
• Do not stare at the operating beam.
Laser Safety
• RG1 IEC 62471-5:2015
• Complies with IEC 60825-1:2014 Class 1 and IEC 62471-5:2015
Risk Group 1.
• Potential hazards may exist during lamp or product servicing.
• Service shall be performed only by authorized, trained servicing
personnel.
• Do not open the enclosure of the product.
• When the enclosure of the product is damaged, don't use it
anymore.
• Do not open the enclosure of laser module inside the product.
• When the enclosure of laser module inside the product is damaged,
don't use it anymore.
• Laser inside. Be aware of the risk of skin or corneal burns.
EN
06
What’s Included
1 2 3
4 5 6
QSG
Nebula Capsule 3 Laser
Adapter
Charging Cable
Remote Control
AAA Battery × 2
Quick Start Guide
EN
07
At a Glance
1. Projector
Front View
Lens
Camera (for autofocus and
auto keystone correction)
1. sdfsdfsdsad
EN
08
Rear View
Speaker
AUX-OUT Socket
• Connect to an external sound output device.
Infrared Receiver
Mode Button
• Press to switch between Bluetooth speaker mode and
projector mode.
Power Button
• Press and hold for 3 seconds to power on / off.
• Press to wake up the projector / enter standby mode in
projector mode.
USB-C Port
• Connect to the power supply with the provided adapter and
charging cable.
• Connect to a USB drive.
HDMI port
• Connect to a playback device via HDMI output.
EN
09
Top View
Volume Up / Down Buttons
Confirmation Button
Return Button
Navigation Buttons
Bottom View
1/4" Tripod Socket
Otros manuales para Nebula Capsule 3 Laser
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
