Anilam Wizard 211 Manual de usuario

P/N 70000421B

Wizard 211

Digital Readout

Operations Manual

WIZARD 211

FSET MM

INCH

ABS

INCR

0.+

SALES & SERVICE:

A Tech Authority, Inc.

13745 Stockton Ave.

Chino CA 91710

909-614-4522

[email protected]

iii

Warranty

ANILAM warrants its products to be free from defects in material and

workmanship for three (3) years from date of installation. At our

option, we will repair or replace any defective product upon prepaid

return to our factory.

This warranty applies to all products when used in a normal industrial

environment. Any unauthorized tampering, misuse, or neglect will

make this warranty null and void.

Under no circumstances will ANILAM, any affiliate, or related company

assume any liability for loss of use or for any direct or consequential

damages.

The foregoing warranties are in lieu of all other warranties expressed

or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose.

System Purchased From: ____________________________

Console Part Number:_______________________________

Console Serial Number: _____________________________

Date of Installation: _________________________________

Feature, Operation, and Technology

WIZARD Digital Readouts provide the absolute latest in ease of

operation, capability, and technology. As a result, ANILAM may alter

and enhance operation, features, and capabilities without notice.

Contents

Contents ................................................................................................................................ iii

Introducing the Wizard............................................................................................................1

The ANILAM Wizard 211 Keypad and Display Windows .............................................2

The ANILAM Wizard 211 Back Panel...........................................................................3

First-Time User Checklist .......................................................................................................5

About This Manual..................................................................................................................7

Function Code List..................................................................................................................8

Beeper ....................................................................................................................................9

Keyboard Entry Error............................................................................................................10

Presetting a Dimension ........................................................................................................11

Resetting an Axis to Zero .....................................................................................................12

Recalling a Preset Dimension ..............................................................................................13

Clearing a Preset Dimension................................................................................................14

Centering the Workpiece ......................................................................................................15

Adding/Subtracting Values ...................................................................................................16

Dividing an Axis Value by 2 ..................................................................................................17

Inch/Metric Conversion.........................................................................................................18

Plus/Minus Key .....................................................................................................................19

Absolute/Incremental (ABS/INCR) Key ................................................................................20

Absolute/Incremental............................................................................................................21

Absolute Zero Set – F 01......................................................................................................22

EverTrackTM Mode – F 02.....................................................................................................23

Setting a Correction Factor – F 03 .......................................................................................27

Correction Factor OFF/ON – F 04 ........................................................................................28

Radius/Diameter per Axis – F 05..........................................................................................29

Approaching Zero Indicator ..................................................................................................30

Approaching Zero – F 06......................................................................................................31

Last Position Save/Recall – F 10/F 11 .................................................................................32

Contents (Continued)

Axis Reset Only – F 16 .........................................................................................................33

Parameter Settings – F 20....................................................................................................34

Metric linear encoders .............................................................................................35

Inch Linear Encoders (BT or JB Linear Encoders)..................................................40

Beeper OFF/ON – F 21 ........................................................................................................41

Display Dim OFF/ON – F 22/F 23 ........................................................................................42

Axis Designation – F24.........................................................................................................43

Linear Encoder Error Detect OFF/ON – F 40/F 41...............................................................44

Diagnostics – F 45 ................................................................................................................45

Troubleshooting ....................................................................................................................47

Index .............................................................................................................................Index-1

Introducing the Wizard

Thank you for purchasing the ANILAM Wizard 211 Digital Readout (DRO).

Review these pages carefully to learn how to properly operate your new DRO.

The new DRO offers many features and capabilities never before used in conventional

DRO systems.

This manual was written with you, the operator, in mind. Please take the time to study

it. A little well-spent time now will ensure many years of trouble-free operation.

For additional information, please contact your local authorized ANILAM distributor, or

call us directly:

ANILAM, Inc.

One Precision Way

Jamestown, New York, U.S.A., 14701

Phone: (716) 661-1700

FAX: (716) 661-1884

E-mail: [email protected]

http://www.anilam.com

Introducing the Wizard (Continued)

The ANILAM Wizard 211 Keypad and Display Windows

NOTE: The Wizard 211 DRO is available in one-axis, two-axis, and three-axis

models. For simplicity, the procedures in this manual describe only a

two-axis model.

WIZARD 211

FSET

INCH

ABS

INCR

Display Windows

Key

Absolute/Incremental

MM/INCH Key

Function Key

Set Key

Plus/Minus Key

Numeric Keys

Axis Keys

Introducing the Wizard (Continued)

The ANILAM Wizard 211 Back Panel

Linear Encoder

Connections

Ground

Connection

Power Cord

Connection

ON/OFF Switch

Fuse Cover Slot

Selecting the Operating Voltage

To select the operating voltage for the DRO:

1. Locate the ON/OFF switch on the back panel of the DRO and verify that the switch

is in the OFF (0) position.

CAUTION:To avoid electrical shock, unplug the DRO from the power source.

2. Insert a small screwdriver into the fuse cover slot and open the fuse cover.

3. Remove the fuse holder. Depending on the desired operating voltage, place the

fuse in either the 115V slot or the 230V slot. For 115V, place the fuse on the right

and the clip on the left; for 230 V, place the fuse on the left and the clip on the right.

NOTE:Both the 5 X 20 mm fuse (Europe) and the ¼ X 1-¼ inch fuse (U.S.), rated at

0.5 amps/250V can be used in the fuse holder.

4. The selected operating voltage is visible through the fuse cover window.

5. Insert the fuse holder into the ON/OFF switch and close the fuse cover.

Introducing the Wizard (Continued)

Your Wizard’s display was designed to be easy to read:

ABS RST CF RI MM INCH

Axis Indicator

Indicates Z1

Coarse Resolution

Diameter Mode

Absolute Mode

Reset Only Axis

Correction Factor

Reference Indicator

MM or INCH Mode

Edge Sensor

Approaching Zero

Indicator

First-Time User Checklist

Your new DRO has many preset values. Before you proceed, please review the

following list to verify default settings. If you need to change any setting(s), refer to

Parameter Settings – F 20.

Description of Setting Factory Setting Your Setting

1. Mill/Lathe Operation MILL

2. Linear Encoder Resolution Axis 1 5 µm

Axis 2

5 µm

3. Direction of Count Axis 1 +

Axis 2

4. Position Tolerance Indicator Axis 1 Set to Zero

Axis 2 Set to Zero

5. Audible Keyboard Tone ON

6. Display Resolution Axis 1 .0002 inches (.005mm)

Axis 2

.0002 inches (.005mm)

7. Display Dimming 15 Minutes

8. Radius Diameter Mode Axis 1 Radius

Axis 2 Radius

First-Time User Checklist (Continued)

For your safety, and to prevent damage to the machine, please verify the following:

9. DRO arm and DRO are securely

mounted to the machine.

Yes/No

10. The DRO Input-voltage switch

on the power-entry module

(back panel) is set to the correct

input voltage.

Yes/No

11. DRO is properly grounded.

(Earth-ground to wall conduit or

water pipe, for example, not

grounded to the machine).

Yes/No

12. All cables are off the floor and

out of the range of moving parts.

Yes/No

Tabla de contenidos

Otros manuales de Lectura digital de Anilam

Anilam

Anilam Wizard 411 Manual de usuario

Manuales populares de Lectura digital de otras marcas

Newall

Newall NMS 800 Manual de usuario

SINO

SINO SDS6 Manual de usuario

HEIDENHAIN

HEIDENHAIN EIB 8000 Manual de usuario

Givi Misure

Givi Misure VISION 518 Manual de usuario

Fagor

Fagor VNP400 Manual de usuario

Easson

Easson ES-9Q Manual de usuario

HAMAR LASER

HAMAR LASER R-1308 Manual de usuario

RST

RST VW2106 Manual de usuario

Metro DataVac

Metro DataVac M2 Manual de usuario

Wixey

Wixey WR525 Manual de usuario

Resson Technologies

Resson Technologies RD-13L Manual de usuario

SHUMATECH

SHUMATECH DRO-550 Manual de instalación y operación

KEMKRAFT

KEMKRAFT KEI-850A Manual de usuario

HEIDENHAIN

HEIDENHAIN ND 7000 Manual de usuario

Fagor

Fagor 20i-T Manual de usuario

Resson Technologies

Resson Technologies RD-11M Manual de usuario

Fagor

Fagor Dro NV-300T Manual de usuario

Geokon

Geokon GK-405 Manual de usuario