Outdoor Wide-band Directional Antenna, X-pol, 698-960/1710-2170/2400-2700MHz, 6.5-9dBi
*Information contained in this document is subject to confirmation at time of ordering.
2/2
Note for Installation and Preparation
Thanks for choosing our product! Before exciting installation, please read this guide carefully.
Make sure qualified personnel are hired for installing this product such as working at height
with safety awareness, tools operating skills, and etc.
Please check the items against the below packing list and make sure the product is in good
condition without any damage and none is missing.
Check the necessary installation tools below are prepared on site before the installation.
Find proper position and the mounting area to mount this antenna based on the coverage
design and planning documents.
Wall Mounting Instruction
STEP1: Mount one part of bracket on the back
of antenna as shown and fix the 4 screws firmly.
STEP2: Mount another part of bracket on the wall
as shown.
STEP3: Connect the both parts of brackets.
Adjust the antenna azimuth direction and fix the
4 screws firmly
STEP4: Adjust the antenna elevation angle and fix
the 4 screws firmly.
STEP5: Joint the connectors with system and implement water-proof measure for connections.
List of Installation Tools
Antenna with 4*M4*8 Screws
Percussion Drill andΦ10mm bit
4mm Hexagon Wrench (Supplied)
Philips Screwdriver (Supplied)
Hexagon/Philips Screwdriver
