AMS TCS3720 Manual de usuario
Document Feedback
TCS3720 ●TCS3720 EVM
Content Guide
Quick Start Guide •PUBLIC
QG001011 •v1-00 • 2021-Aug-16
9│2
Content Guide
1Out of the Box................................ 3
2Software Installation ..................... 4
3Connect Hardware......................... 7
4Start the Application ..................... 8
5Uninstall Application..................... 9
Document Feedback
TCS3720 ●TCS3720 EVM
Out of the Box
Quick Start Guide •PUBLIC
QG001011 •v1-00 • 2021-Aug-16
9│3
1 Out of the Box
For a detailed description of the TCS3720 EVM, please refer to User Guide:
●UG001018
Each TCS3720 Evaluation Kit comes with the following components:
Figure 1:
Evaluation Kit Contents
No.
Item
Description
1
TCS3720 Daughter Card
PCB with TCS3720 sensor installed
2
EVM Controller Board
Used to communicate USB to I2C
3
USB Cable (A to Micro-B)
Connects EVM controller to PC
4
Flash Drive
Includes application installer and documents
1
2
3
4
Document Feedback
TCS3720 ●TCS3720 EVM
Software Installation
Quick Start Guide •PUBLIC
QG001011 •v1-00 • 2021-Aug-16
9│4
2 Software Installation
1. Plug the flash drive into an unused USB port
2. Double-click the Setup.exe file on the flash drive, or click Start > Run and type E:setup.exe and
press Enter. IMPORTANT: Use the appropriate drive letter in the above command to install the
software. Flash Drive will commonly be assigned the next available drive letter for example C:
hard drive, D: CD-ROM, E: flash drive
3. The Setup Wizard will open and guide you through the installation of the TCS3720 host
software, (Figure 2 through Figure 8)
4. The EVM Controller board requires the installation of FTDI CDM drivers. If these drivers are not
installed on your machine, this setup will automatically launch the installer for the FTDI drivers.
5. At the end of the installation, click Finish to exit the setup.
Figure 2:
Welcome Screen
Figure 3:
Liability Disclaimer
Document Feedback
TCS3720 ●TCS3720 EVM
Connect Hardware
Quick Start Guide •PUBLIC
QG001011 •v1-00 • 2021-Aug-16
9│7
3 Connect Hardware
Plug the TCS3720 Daughterboard into the Controller board (Figure 1). Always use ESD procedures
when handling the EVM.
Using the enclosed USB cable, plug the micro-B connector into the EVM module. Using the other end
of the cable, plug the USB A-connector into a USB port on the computer.
When the USB cable is connected, the green LED should light on power up to indicate that power is
being received via the USB interface, and the controller board processor is running. If the green LED
does not light, check the USB cable connections; unplug the USB cable and try again. If the green
LED still does not light, check the PC for USB error messages. When the software application is run, it
will turn off the LED.
Document Feedback
TCS3720 ●TCS3720 EVM
Start the Application
Quick Start Guide •PUBLIC
QG001011 •v1-00 • 2021-Aug-16
9│8
4 Start the Application
To start the application select ams-OSRAM > TCS3720 EVM > TCS3720 EVM on the All Programs
menu. The default installation directory depending on the device and the operating system you are
using is:
C:\Program Files\ams-OSRAM\TCS3720_EVM (Windows 32-bit operating systems)
C:\Program Files (x86)\ams-OSRAM\TCS3720_EVM (Windows 64-bit operating systems)
A different install path may be selected by the user during the install (Figure 4). When started, the
TCS3720 window will open on the PC and automatically connect to the hardware.
Document Feedback
TCS3720 ●TCS3720 EVM
Uninstall Application
Quick Start Guide •PUBLIC
QG001011 •v1-00 • 2021-Aug-16
9│9
5 Uninstall Application
To remove the software from your computer (Figure 9), select ams-OSRAM > TCS3720 EVM >
Uninstall TCS3720 EVM or use the Windows Control Panel.
Figure 9:
Remove Installation
Headquarters
ams AG
Tobelbader Strasse 30
8141 Premstaetten
Austria, Europe
Tel: +43 (0) 3136 500 0
Please visit our website at www.ams.com
Buy our products or get free samples online at www.ams.com/Products
Technical Support is available at www.ams.com/Technical-Support
Provide feedback about this document at www.ams.com/Document-Feedback
For sales offices, distributors and representatives go to www.ams.com/Contact
For further information and requests, e-mail us at ams_sales@ams.com
Copyright ams AG. Trademarks Registered. All rights reserved. The material herein may not be reproduced, adapted, merged,
translated, stored, or used without the prior written consent of the copyright owner.
ams AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property
damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any
kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or
liability to recipient or any third party shall arise or flow out of ams AG rendering of technical or other services.
Otros manuales para TCS3720
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios de AMS
AMS
AMS AS5170 Series Manual de usuario
AMS
AMS TCS3408 Manual de usuario
AMS
AMS TMG3992 EVM Manual de usuario
AMS
AMS AS8579-TS EK DB Manual de usuario
AMS
AMS AS5x61 Series Manual del propietario
AMS
AMS TSL2585 Manual de usuario
AMS
AMS Kombi Alarm Manual de usuario
AMS
AMS TSL2571 Series Manual de usuario
AMS
AMS AS5262 Manual de usuario
AMS
AMS TSL2520 Manual de usuario
AMS
AMS TMD2755 Manual de usuario
AMS
AMS AS5048 Eval-Kit Manual de usuario
AMS
AMS AS5263 Manual de usuario
AMS
AMS AS5306 Manual de usuario
AMS
AMS CMOSIS CHR70M Manual de usuario
AMS
AMS AS7225 Manual de usuario
AMS
AMS TCS3400 EVM Manual de usuario
AMS
AMS TCS3701 Manual de usuario
AMS
AMS AS7221 Manual de usuario
AMS
AMS AS5600 Manual de usuario
