AMPTRON 3IBAT Manual de usuario

This manual, software and firmware described in it are copyrighted by their respective owners

and protected under the laws of the Universal Copyright Convention. You may not reproduce,

transmit,transcribe,storeinaretrievalsystem,ortranslateintoanylanguage,inanyformorby

anymeans,electronic,mechanical,magnetic,optical,chemical,biological, molecular, manual,

orotherwise, any part ofthispublication without the expresswrittenpermission of the publisher.

All products and trade names described within are mentioned for identification purpose only.

No affiliation with or endorsement of the manufacturer is made or implied. Product names and

brands appearing in this manual are registered trademarks of their respective companies.

The information published herein has been checked for accuracy as of publishing time. No

representation or warranties regarding the fitness of this document for any use are made or

implied by the publisher. We reserve the right to revise this document or make changes in the

specificationsoftheproduct described therein at any time without notice and without obligation

to notify any person of such revision or change.

Printed in Taiwan.

User Manual V1.0

3IBAT User’s Manual

Item Checklist

Before you begin installing your motherboard, please make

sure that the following materials have been shipped:

This mainboard comes in a sturdy cardboard shipping

carton, which should contain the following items:

• The main board.

• This user manual.

• One Floppy disk drive cable.

• One Ultra DMA/66 IDE cable.

• Software utilities.

If you discover damaged or missing items, please contact your

retailer.

User’s manual Version: 1.0

Release Date: May 2000

3IBAT User’s Manual

CONTENTS

Introduction .......................................................................5

1-1 Introduction ......................................................................................5

1-2 Specifications ..................................................................................5

1-3 PACKAGE CHECKLIST ....................................................................7

1-4 Block Diagram ..................................................................................8

1-5 Main Board Layout with Default Setting .............................................9

1-6 Static Electricity Precautions ..........................................................10

Installation Procedures................................................... 11

2-1 Setting System Jumpers ................................................................ 11

2-2 System Memory (DIMM) .................................................................14

2-3 Central Processing Unit (CPU) ........................................................15

2-4 Expansion Cards.............................................................................15

2-5 External Connectors........................................................................16

2-6 Power Connection Procedures ........................................................23

AWARD BIOS Setup ........................................................25

3-1Introduction .....................................................................................25

3-2 MAIN MENU ...................................................................................28

3-3 STANDARD CMOS SETUP............................................................. 30

3-4 BIOS FEATURES SETUP ...............................................................33

3-5 CHIPSET FEATURES SETUP.........................................................39

3IBAT User’s Manual

3-6 POWER MANAGEMENT SETUP ...................................................43

3-7PNP/PCICONFIGURATION ............................................................47

3-8 Defaults Menu .................................................................................49

3-9 CPU and H/W Monitor SEETING.....................................................49

3-10INTERGRATEDPERIPHERALS .................................................... 50

3-11PASSWORD SETTING..................................................................53

3-12IDEHDDAUTODETECTION.........................................................54

3-13 Exit Selecting................................................................................54

Software Driver install.....................................................55

4-1UPDATEDPRODUCTINFORMATION .............................................55

4-2 PROMISE ULTRA66 Driver Installion Windows 95/98 ......................57

Anti-Virus software installation ......................................60

5-1 Anti-Virus software installation ........................................................60

3IBAT User’s Manual

1-1 Introduction

The motherboard is a high-performance, low-cost motherboard which sup-

portstheIntel PIII FC-PGAandSocket370microprocessor. System memory

bank supports 3 DIMM socket. Memory up to 768MB 100MHZ & *133MHZ

SDRAM.

On-board include 2X AGP SLOT, ATX power, Super I/O, 2 Ultra DMA33/

66 EIDE interfaces,2 Ultra DMA/33 EIDE , 2 USB ports, 4 PCI Expansion

slots, and 2 ISA Slots.

1-2 Specifications

CPU - Pentium III /CeleronTM Processor.

- CeleronTM Socket 370 PPGA packaged Processor.

- 2nd level Cache Depend on CPU.

- Coppermine Socket 370 FCPGA packaged Processor.

- VIA Cyrix Processor (Joshua)

Chipset - Intel FW82443BX AGPset North Bridge.

- Intel FW82371EB South Bridge.

Clock Generator

- Supports 66 / 100 / 133* MHz.

( "*" means frequency can be adjusted, and subject to different

configuration )

Memory - 3 x 168-pin DIMM Sockets.

- Supports 100MHZ & 133MHZ SDRAM 16MB~768MB.

- Supports only 3.3V SDRAM DIMM.

Introduction

3IBAT User’s Manual

I/O Control

- Winbond W83977EF-AW

PCI Ultra DMA66 EIDE Controller

- Promise Chipset supports 2 channels Ultra DMA66/33 IDE

Port for 4 IDE Device.

- Sustained transfer rates up to 66MB/sec.

- PCI “Plug & Play” compatibility.

- Onboard BIOS with LBA translation and Extended Int 13

supporting IDE hard drives up to 128GB.

Expansion Slot

- Four 32-bit PCI slots support Master mode.

- One AGP 2X Slot.

- Two ISA Slot.

I/O Interface

- PCI Bus master IDE interface on board with four connectors

support 8 IDE devices in 4 channel, the PCI IDE Controller

supports PIO Mode 0 to Mode 4, Bus master IDE DMA Mode 2

and Ultra DMA 33/66.

- On board super Multi-I/O chip that support 2 serial port with

16550 Fast UART compatible, 1 parallel port with EPP and

ECP capabilities, and a floppy disk drive interface.

- On board support PS/2 mouse Connector.

- On board support PS/2 Keyboard Connector.

- On board 2 USB ports.

- On board IrDA connector.

- Floppy port supports 2 FDD with 360K, 720K,1.2M,1.44M and

2.88M bytes ,Supports LS-120 floppy disk device.

Other Function

- Support Modem Ring Power On.

- Supports Keyboard, and WOL (Wake On LAN).

Power Supply

- On board 3V, 5V and 12V 20-pin ATX power connector.

- Use switching regulator to support CPU core voltage.

3IBAT User’s Manual

Hardware Monitor

- CPU/Power Supply/Chassis Fan Revolution detecting.

- CPU Fan Control.

- System Voltage Detect.

- Display Actual Current Voltage.

BIOS - Licensed AWARD BIOS, 2M bit FLASH RAM.

- ACPI ready for PC98/Windows 98.

-SystemBIOS supportsACPIfunctionandGreen featurefunction,

DMI, Plug and Play Flash ROM.

Form factor

- ATX Form Factor.

- Dimensions 305mm x 190mm, 4 layers PCB.

Drivers - INF Update Utilities.

- Promise Chipset Ulart DMA66/33 IDE drivers.

- Virus Protection Applications.

1-3 PACKAG CH CKLIST

If you discover any item below was damaged or lost, please contact your

vendor.

The main board.

This user manual.

One Floppy disk drive cable.

One Ultra DMA/66 IDE cable.

Software utilities.

3IBAT User’s Manual

1-4 Block Diagram

3IBAT User’s Manual

1-5 Main Board Layout with Default Setting

System default support PIII(100/133MHz FSB)

3IBAT User’s Manual

1-6 Static lectricity Precautions

Static electricity can easily damage your motherboard.

Observing a few basic precautions can help you safeguard against dam-

age that could result in expensive repairs. Follow the measures below to

protect your equipment from static discharge:

Keep the motherboard and other system components in their antistatic

packaging until you are ready to install them.

Touch a grounded surface before you remove any system component from

its protective antistatic packaging. A grounded surface within easy reach

is the expansion slot covers at the rear of the system case. or any other

unpainted portion of the system chassis.

During configuration and installation, touch a ground surface frequently to

discharge any static electric charge that may build up in your body. An-

other option is to wear a grounding wrist strap.

When handling a motherboard or an adapter card, avoid touching its

components.Handlethemotherboardandadaptercardseitherbythe edges

or by the mounting bracket that attaches to the slot opening in the case.

Tabla de contenidos

Otros manuales de Placa madre de AMPTRON

AMPTRON

AMPTRON PII-3100 Manual de usuario

AMPTRON

AMPTRON PIII-3754LMR Manual de usuario

AMPTRON

AMPTRON 3WMV Series Manual de usuario

AMPTRON

AMPTRON M810D Series Manual de usuario

AMPTRON

AMPTRON M810LR Manual de usuario

AMPTRON

AMPTRON PM8400B Manual de usuario

AMPTRON

AMPTRON M935 Series Manual de usuario

AMPTRON

AMPTRON BKS630E Manual de usuario

AMPTRON

AMPTRON M585LMR Manual de usuario

AMPTRON

AMPTRON PM-9800 Manual de usuario

AMPTRON

AMPTRON M817 Series Manual de usuario

AMPTRON

AMPTRON 3SLAV Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario