amora calliope Manual de usuario
instruction manual
calliope
■ Notice d’instructions ■ Beipackzettel ■ Instructiefolder
■ Libretto d’istruzioni ■ Manual de instrucciones ■ Návod k použití
■ Инструкция ■ Instrukcja
stimulation for your senses
Congratulations on your purchase
of an amora™ calliope Scent Hub
amora™ Scent Hubs use advanced, cutting edge technology to bring you
the most modern way to stimulate both mind and senses, creating an
evocative, relaxing ambience for your chosen space.
How does it work?
Ultrasonic technology: a small ceramic disc at the base of the water
reservoir vibrates at super-high frequency. These vibrations cause water
and essential oils to break down into micro-ne particles, which rise into
the air as a cooling mist.
This instruction leaet will guide you through the use of and care for
your amora™ Scent Hub. Please retain this leaet for future reference.
www.myamora.com
amora is a registered trademark of Ashleigh & Burwood London
What’s in the box?
1 Ultrasonic Diffuser (scent hub)
1 Mains Adaptor
1 Cleaning Brush
3
EN
Power Button
Splash Guard Cover
Body Base
Mist Nozzle
Glass Body
Cleaning Brush
Main Body
Max Fill Line
Air Outlet
Ceramic Disc
DC Socket
Mains Adaptor
Get to know your scent hub
Air Inlet
How to fill and prepare your scent hub for use
1. Remove Mist Nozzle
4. Add around 60ml of distilled or
demineralised water
2. Remove Glass Body
3. Remove Splash Guard Cover
Do not exceed the Max
Water Line. 2 to 3 drops of
essential oil is enough for
60ml of water
5
5. Replace the Splash Guard Cover, Glass
Body and Mist Nozzle
7. Press the Power Button
and enjoy your amora™
Scent Hub
To avoid spillage do not tilt the main body
6. Insert the Mains Adaptor into the unit
and plug into household mains socket
EN
Quick Guide:
Product specication:
Unit operating power: 12W
Unit operating voltage: 24V DC
Water tank capacity: 60ml
Adaptor: Input 100-240V AC
How to ll and prepare your scent hub for use
1. Remove the Mist Nozzle, Glass Body and Splash Guard Cover from
the unit.
2. Fill the Water Tank with water up to the Max Fill Line. Add 2 - 3
drops of essential oil if desired. We recommend an oil from the amora™
essential oil collection.
3. Place the Splash Guard Cover, Glass Body and Mist Nozzle securely
back onto the Body Base.
4. Plug the Mains Adaptor into the unit and plug the other end into a
household mains socket.
Specic functions:
█ Power Button
■ Press once to turn on the scent hub in continuous mist and light
mode (for around 2 hours).
■ Press a second time to select intermittent mist mode (on/off every
15 seconds) for around 4 hours.
■ Press a third time to turn the unit off.
The unit will automatically turn off the mist function when the water level becomes
too low, preventing damage to the device.
7
EN
How to convert your adaptor:
Select appropriate pin plate. Place at
a 15º angle over adaptor, as shown
in diagram and turn clockwise until
you hear a click.
Operation advice:
■ Place the device on a
solid, level and moisture-
resistant surface. Do not
place the device directly
underneath a shelf or a wall
unit, or near any material
that could be affected
by water vapour. When
operating the device make
sure the water vapour does not ow in the direction of an electrical socket,
or near any electrical item which could be affected by water vapour, such
as telephone, televisions etc.
■ Ensure that the air inlet is free from obstruction.
■ When using with fragrance or essential oils, ensure the device is not
near any painted, plastic or polished surfaces which could be adversely
affected by your oils.
■ Do not allow fragrance or essential oils to come into contact with the
outer body of the device. Should this happen, wipe clean immediately to
prevent any damage to the exterior.
■ Use room-temperature water only. Never use water which is over
40°c. For best results, use distilled or demineralised water.
■ Never attempt to ll the device when it is operating, and always unplug
the device from the mains adaptor when lling. Ensure you wipe clean any
spillages before operating the device. Keep the device level at all times
when there is water in the reservoir in order to avoid spillage.
■ Do not operate the device without water.
■ If the room temperature is very low, the mist produced may settle
around the device and cause the surrounding area to become damp.
■ Should the unit be accidentally knocked or tipped over during use or
with water in the reservoir, unplug the unit. Pour out any remaining water
(ensuring that you pour at the opposite side to the Air Outlet - see diagram
and names of parts to recognise this), and follow cleaning instructions
provided in this leaet. Allow the device to dry for at least 24 hours before
the next use.
Notes:
The volume of mist produced will vary, but this is perfectly normal and
should not be considered as a fault. Environmental factors which can
inuence the amount of mist produced include temperature, humidity, air
ow or water type.
Warning:
■ Keep device and adaptor out of reach of children and pets at all times.
Please be aware that during operation, the light and mist is likely to be
attractive to young children, so adult supervision is required.
■ Always unplug the unit from the mains power supply when not in use.
■ Never move the unit whilst in use, or with the power cord connected.
■ Use the device only with the power adaptor supplied.
■ Never operate the device without the top cover in place, and never
attempt to touch inside the device during operation.
■ Do not operate the diffuser near sources of heat or open ame.
■ Ensure the device has adequate ventilation at all times. Never cover
or wrap either the power adaptor or device itself with cloth or paper, as this
could create a re risk.
■ Do not attempt to open, modify or disassemble the device in any way.
Should the unit need repair, please return it to your local amora™ retailer
for assistance.
■ If you notice anything unusual or abnormal during operation of the
device, such as peculiar noise, smells or smoke, stop using the unit
immediately. Disconnect the device and contact your amora™ retailer.
Cleaning:
The device must be cleaned after each use. Before cleaning, disconnect
the power cord from the unit, remove the top cover of the device and
carefully pour out any remaining liquid, ensuring that you pour at the
opposite side to the Air Outlet (see diagram and names of parts to
recognise this).
Use the brush supplied or a soft cloth to carefully clean the inside of the
reservoir, especially around the ceramic disc. Do not use any cleaning
9
EN
agents. If ordinary tap water is used in the device, natural mineral deposits
will gradually build up in the water tank. To avoid this, we recommend
using distilled or demineralised water.
Keep the unit empty, clean and dry when not in use.
Troubleshooting:
Should you have any problems with your device, please consult the table
below and action the suggested solutions provided, in accordance with the
instructions in this booklet.
Symptom Possible cause Solution
No Power Power supply is not
connected
Plug in the adapter and press the
Power Button
Light, but no mist Water level in tank is
too low
Rell the water tank
Water level in tank is
too high
Remove some water until level is
below maximum level
Ceramic disc needs
cleaning
Clean the Water Tank and
Ceramic Disc
Little or No Mist Water level in Water
Tank is too low
Rell the Water Tank
Water level in Water
Tank is too high
Disconnect the device from the
mains adaptor and carefully pour
out water until the level is at or
below the Max Fill Level
Ceramic disc needs
cleaning
Clean the Water Tank and
Ceramic Disc
Top Cover is not sitting
correctly
Ensure the Top Cover is correctly
placed on top of the base unit
If you experience further difculty please contact your amora™ retailer
Symptom Possible cause Solution
... Little or No Mist Air Inlet is obstructed Disconnect your scent hub from
the mains adaptor. Carefully check
the air inlet, cleaning if necessary
to remove any obstruction. You
may need to empty the Water Tank
before you do this
Unit is leaking
water
Top Cover is not sitting
correctly
Ensure the Top Cover is correctly
placed on top of the base unit
Tabla de contenidos
Idiomas:
Otros manuales de Accesorios de amora
