Ameriphone XL-40 Manual de usuario

Operating Instructions

∆

M46802

XL-40 AMPLIFIED TELEPHONE

The Extra Loud & Clear

with lighted keypad!

IMPORTANT INSTRUCTIONS

Important Safety

Instructions

When using your telephone

equipment, basic safety precautions

should always be followed to

reduce the risk of fire, electric

shock and persons including the

following:

1.Read and understand all

instructions.

2.Follow all warnings and

instructions marked on the

telephone.

3.Do not use this telephone

near a bathtub, wash basin,

kitchen sink or laundry tub, in

a wet basement, near a

swimming pool or anywhere

else there is water.

4.Avoid using a telephone

(other than a cordless type)

during a storm. There may be

a remote risk of electrical

shock from lightning.

5.Do not use the telephone to

report a gas leak in the

vicinity of the leak.

6.Unplug this telephone from

the wall outlets before

cleaning. Do not use liquid

cleaners or aerosol cleaners

on the telephone. Use a damp

cloth for cleaning.

7.Place this telephone on a

stable surface. Serious damage

and/or injury may result if the

telephone falls.

8.Do not cover the slots and

openings on this telephone.

This telephone should never

be placed near or over a

radiator or heat register. This

telephone should not be

placed in a built-in installation

unless proper ventilation is

provided.

9.Operate this telephone using

the electrical voltage as

stated on the base unit or the

owner’s manual. If you are

not sure of the voltage in your

home, consult your dealer or

local power company.

10. Do not place anything on

the power cord. Install the

telephone where no one will

step or trip on the cord.

11. Do not overload wall outlets

or extension cords as this

can increase the risk of fire or

electrical shock.

12. Never push any objects

through the slots in the

telephone. They can touch

dangerous voltage points or

short out parts that could

result in a risk of fire or

electrical shock. Never spill

liquid of any kind on the

telephone.

13. To reduce the risk of electrical

shock, do not take this phone

Important Safety

Instructions

apart. Opening or removing

covers may expose you to

dangerous voltages or other

risks. Incorrect reassembly

can cause electric shock when

the appliance is subsequently

used.

14. Unplug this product from the

wall outlets and refer

servicing to the manufacturer

under the following conditions:

A. When the power supply

cord or plug is frayed or

damaged.

B. If liquid has been spilled

into the product.

C. If the telephone has been

exposed to rain or water.

D. If the telephone does not

operate normally by

following the operating

instructions. Adjust only

those controls that are

covered by the operating

instructions. Improper

adjustment may require

extensive work by a

qualified technician to

restore the telephone to

normal operation.

E. If the telephone has been

dropped or the case has

been damaged.

F. If the telephone exhibits a

distinct change in performance.

15. Never install telephone

wiring during a lightning

storm.

16. Never install telephone

jacks in wet locations

unless the jack is specifically

designed for wet locations.

17. Never touch uninsulated

telephone wires or terminals

unless the telephone line

has been disconnected at

the network interface.

18. Use caution when installing

or modifying telephone lines.

19. Use only the power cord

and batteries indicated in

this manual. Do not dispose

of batteries in a fire. They

may explode. Check with

local codes for possible

special disposal instructions.

ADDITIONAL SAFETY NOTES

FOR CANADIAN USERS

The following items are included

as part of the CS-03 Requirements.

The standard connecting

arrangement for the equipment is

CA11A. This product meets the

applicable Industry Canada

technical specifications.

NOTICE: The Canadian

Department of Communications

Important Safety

Instructions

label identifies certified equipment.

This certification means that the

equipment meets certain

telecommunications network

protective operational and safety

requirements. The Department

does not guarantee that the

equipment will operate to the

user’s satisfaction. Before installing

this equipment, users should

ensure that it is permissible to be

connected to the facilities of the

local telecommunications company.

The equipment must also be

installed using an acceptable

method of connection. In some

cases, the company’s inside

wiring associated with a single

line individual service may be

extended by means of a certified

connector assembly (telephone

extension cord). The customer

should be aware that compliance

with the above conditions may not

prevent degradation of service in

some situations. Repairs to certified

equipment should be made by an

authorized Canadian maintenance

facility designated by the supplier.

Any repairs or alterations made

by the user to this equipment, or

equipment malfunctions, may give

the telecommunications company

cause to request the user disconnect

the equipment.

Users should ensure for their own

protection that the electrical

ground connections of the power

utility, telephone lines and internal

metallic water pipe system, if

present, are connected together.

This precaution may be particularly

important in rural areas.

CAUTION: Users should not

attempt to make such connections

themselves, but should contact the

appropriate electric inspection

authority, or electrician, as

appropriate. The Ringer Equivalent

Number is an indication of the

maximum number of terminals

allowed to be connected to a

telephone interface. The

termination on an interface may

consist of any combination of

devices subject only to the

requirement that the sum of the

Ringer Equivalent Number of all

the devices not exceed five.

SAVE THESE INSTRUCTIONS

Contents

Introducing the XL-40

Warranty Service..............................................................................1

Sales Receipt ....................................................................................1

Help from Ameriphone ......................................................................1

Package Checklist ............................................................................2

Features ..........................................................................................3

Setting up Your XL-40

Installing the Backup Batteries ............................................................4

Setting the Dialing Mode ..................................................................5

Connecting for Desk or Wall Mount ..................................................5

Desktop Use ..............................................................................5

For Wall Mounting......................................................................5

Using Your XL-40

Incoming Voice Volume......................................................................7

Incoming Voice Tone..........................................................................8

Ringer Volume and Tone ....................................................................8

Hold................................................................................................8

Last Number Redial ..........................................................................9

Flash................................................................................................9

Special Features

Unanswered Call/Voice Mail Message Light ......................................10

Programming the Memory Buttons......................................................11

Direct Audio Output ........................................................................12

Cochlear Implant Adapter Cord ........................................................12

Connecting to Speech Processor ........................................................12

Regulatory Compliance ....................................................................13

Warranty ........................................................................................19

Specifications ..................................................................................21

Troubleshooting Chart ......................................................................21

Index..............................................................................................22

Help from Ameriphone

For help with using your XL-40, call

our Customer Relations department

at 800-874-3005.

Please make sure your XL-40

package includes the items shown

in Figure 1.

Introducing the XL-40

Thank you for selecting the XL-40

Amplified Telephone from

Ameriphone. These Operating

Instructions and the associated

Quick Operating Guide provide

you with the information you

need to use your XL-40 effectively,

easily and safely. Read this

manual thoroughly before using

your telephone. Keep the manual

near the telephone for easy

reference.

Warranty Service

Your telephone is designed to

provide years of quality service.

But, should the phone malfunction

and the Trouble-shooting Chart

on page 12 not resolve the

problem, follow the Warranty

procedure on page 19.

Sales Receipt

Be sure to save your sales receipt

as proof of purchase date should

you need warranty service.

Package Checklist

456

789

HOLD PROG

TONE

LO HI

FLASH REDIAL

VOL

AMPLIFY

M11

M10

OPERATING

INSTRUCTIONS

AND

QUICK GUIDE

XL-40

Handset Base Unit

Telephone Line Cords

Handset

Coil Cord

Operating Guides

Figure 1 - Package Components

Mounting Bracket AC Adapter

Features on the XL-40

RINGER volume switch

AUDIO OUTPUT jack

AC adapter and phone

line connection

TONE/PULSE switch

RING TONE switch

Phone number

directory

MEMORY button

REDIAL button

FLASH button

VOL volume slider

LOW BATTERY indicator

RING flasher

AMPLIFY button

AMPLIFY/MISSED CALLS/

VOICE MAIL/EXTENSION

IN USE indicator

PROG program button

RINGER RING TONE DIAL AUDIO

OUTPUT

Lo Med Hi T P

Lo Hi

456

789

HOLD PROG

TONE

LO HI

FLASH REDIAL

VOL

AMPLIFY

M10

M11

TONE

slider

HOLD

button

Figure 2 - Base Unit Controls

HOLD

indicator

Insert 4 AA

batteries

here

Press in

here with a

tip of a pen

to open

btt

Setting up Your XL-40

There are five initial steps involved

in setting up your XL-40 for the

first time.

1. Insert four AA alkaline

batteries for back-up in case

of AC power outage.

2. Decide if you want the

phone to sit on a desk or

hang on the wall.

3. Connect the telephone

components.

4. Program up to 12 telephone

numbers to call with the

press of a memory button.

5. Set up special features

Installing the Backup Batteries

If there is a power outage, the

XL-40 will operate for up to 48

hours with four AA alkaline

backup batteries (not included). If

the phone is not in use, the

batteries may last for several months.

To install new batteries:

1. Slide open the battery

compartment cover on the

bottom of the telephone

(Figure 3).

2. Install four fresh batteries. Be

sure to observe battery polarity

as imprinted on the base of

the compartment. The battery

indicator on the top panel

will light up if the batteries

are running low.

The phone operates as a regular

phone if there is no power or battery.

XL-40 Low Battery Indicator Light

If the batteries are weak or not

installed, the Low Battery indicator

will light up. Install fresh batteries

according to the directions above.

Figure 3 - Accessing the Batteries

HOLD PROG

TONE

LO HI

FLASH REDIAL

VOL

AMPLIFY

Figure 4 - Low Battery Indicator Light

Setting the Dialing Mode

Set the dial mode switch to T

(tone) if you have touch tone

service. Set the switch to P(pulse)

if you have rotary dialing.

Connecting for Desk or Wall Mount

For Desktop Use

1. Connect one end of the

telephone line cord to the

“Line”jack on the back of

the XL-40 and the other end

to the phone outlet on your

wall. Connect the handset

cord to the telephone as

shown in Figure 5.

2. Plug the AC adapter into an

electric outlet and into the

AC jack on the telephone as

shown in Figure 5.

Setting up Your XL-40

(continued)

3. Lift the handset and listen for

a dial tone.

The phone is ready to use.

For Wall Mounting

1. Slide the handset hook out of

the base as shown in Figure

6 and reverse its position so

that the hook points up and

will hold the handset when

you hang up.

2. Insert the tabs of the phone

base into the slots in the

lower position of the base as

shown in Figure 7. Push the

mounting bracket in and

down firmly until it snaps into

place.

Figure 5 - Connecting the Components

Line Cord

AC Adapter

Handset

(Curly)

Cord

Figure 6 - Reversing the Hook

Otros manuales para XL-40

Tabla de contenidos

Otros manuales de Teléfono de Ameriphone

Ameriphone

Ameriphone Dialogue RC-100 Manual de usuario

Ameriphone

Ameriphone DIALOGUE XL 50 Manual de usuario

Ameriphone

Ameriphone III Manual de usuario

Ameriphone

Ameriphone JV-35 Manual de usuario

Ameriphone

Ameriphone SR100 Manual de usuario

Ameriphone

Ameriphone DIALOGUE XL 50 Manual de usuario

Ameriphone

Ameriphone DIALOGUE VCO Manual de usuario

Ameriphone

Ameriphone SR100 Manual de usuario

Ameriphone

Ameriphone DIALOGUE XL 30 Manual de usuario

Ameriphone

Ameriphone DIALOGUE XL 30 Manual de usuario

Ameriphone

Ameriphone SR200 Manual de usuario

Ameriphone

Ameriphone DIALOGUE VCO Manual de usuario

Ameriphone

Ameriphone AMPLIFIED TELEPHONE Manual de usuario

Ameriphone

Ameriphone JV-35 Manual de usuario

Ameriphone

Ameriphone ER Telephone Manual de usuario

Ameriphone

Ameriphone XL-40 Manual del propietario

Ameriphone

Ameriphone JV-35 Manual de usuario

Ameriphone

Ameriphone DIALOGUE XL-25S Manual de usuario

Ameriphone

Ameriphone Dialogue JB-20 Manual de usuario

Ameriphone

Ameriphone The Talking Phone Manual de usuario

Ameriphone

Ameriphone DIALOGUE XL 30 Manual de usuario

Ameriphone

Ameriphone VCO Manual de usuario

Ameriphone

Ameriphone Photo Phone P-300 Manual de usuario

Ameriphone

Ameriphone VCO Manual de usuario

Manuales populares de Teléfono de otras marcas

GE 2-9480 Manual de usuario

Geemarc

Geemarc PHOTOPHONE 155 Manual de usuario

D-Link

D-Link DWR-720/PW Manual de usuario

Interquartz

Interquartz Gemini IQ333 Manual de usuario

SSS Siedle

SSS Siedle HT 840-0 Manual de usuario

Motorola

Motorola TITANIUM Manual de usuario

Panasonic

Panasonic ICX Manual de usuario

LG H870DS Manual de usuario

Samsung

Samsung GT-I9500 Manual de usuario

AT&T

AT&T Trimline 205 Manual de usuario

Selta

Selta zenyth 600 Manual de usuario

Doro

Doro AFTI 20 Manual de usuario

UNIQCELL

UNIQCELL A1 Manual de usuario

Panasonic

Panasonic KX Series Manual de usuario

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manual de usuario

BT Decor 425 Manual de usuario

NEC

NEC SV8500 Manual de usuario

Teledex

Teledex PEARL Manual de usuario