Ameriphone W425 Manual de usuario
Walker Ameriphone
A Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
1-800-552-3368
www.mywalker.com
Rev.1 (11-02)
E
N
G
L
I
S
H
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S
900 MHz Cordless Telephone
with Clarity®Power™Technology
Model W425 Owners Manual
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
W425 Features . . . . . . . . . . . . . . . . . . . . . . . . . .6
Connecting Your Telephone . . . . . . . . . . . . . . . . . .10
Choosing a Location . . . . . . . . . . . . . . . . . . . . . . .10
Desktop Installation . . . . . . . . . . . . . . . . . . . . . . . .11
Wall Mount Instructions . . . . . . . . . . . . . . . . . . . . .12
Handset Battery Charging . . . . . . . . . . . . . . . . . . .13
Operating Your Telephone . . . . . . . . . . . . . . . . . . . . . . . .14
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Memory Storage . . . . . . . . . . . . . . . . . . . . . . . . .18
Making and Receiving Calls . . . . . . . . . . . . . . . . . .19
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
FCC Requirements and Regulations . . . . . . . . . . . . . . . . . .22
Warranty and Service . . . . . . . . . . . . . . . . . . . . . . . . . . .24
2
Table of Contents
3
E
N
G
L
I
S
H
When using your telephone equipment, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and injury to persons
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on
the telephone.
3. Do not use this telephone near a bathtub, wash
basin, kitchen sink or laundry tub, in a wet
basement, near a swimming pool or anywhere
else there is water.
4. Avoid using a telephone (other than a cordless
type) during a storm. There may be a
remote risk of electrical shock from lightning.
5. Do not use the telephone to report a gas leak in
the vicinity of the leak.
6. Unplug this telephone from the wall outlets before
cleaning. Do not use liquid cleaners or aerosol
cleaners on the telephone. Use a damp cloth for
cleaning.
7.
Place this telephone on a stable surface. Serious
damage and/or injury may result if the telephone
falls.
8. Do not cover the slots and openings on this
telephone. This telephone should never be placed
near or over a radiator or heat register. This
telephone should not be placed in a built-in
installation unless proper ventilation is provided.
9. Operate this telephone using the electrical
voltage as stated on the base unit or the owner’s
manual. If you are not sure of the voltage in your
home, consult your dealer or local power company.
10.
Do not place anything on the power cord. Install the
telephone where no one will step or trip on the cord.
11. Do not overload wall outlets or extension cords
as this can increase the risk of fire or electrical
shock.
12. Never push any objects through the slots in the
telephone. They can touch dangerous voltage
points or short out parts that could result in a risk
of fire or electrical shock. Never spill liquid of
any kind on the telephone.
13.
To reduce the risk of electrical shock, do not take
this phone apart. Opening or removing covers
may expose you to dangerous voltages or other
risks. Incorrect reassembly can cause electric
shock when the appliance is subsequently used.
14.
Unplug this product from the wall outlet and refer
servicing to the manufacturer under the following
conditions:
A. When the power supply cord or plug is
frayed or damaged.
B. If liquid has been spilled into the product.
C. If the telephone has been exposed to rain
or water.
D. If the telephone does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions. Improper
adjustment may require extensive work by
a qualified technician to restore the
telephone to normal operation.
E. If the telephone has been dropped or the
case has been damaged.
F. If the telephone exhibits a distinct change
in performance.
15. Never install telephone wiring during a lightning
storm.
16. Never install telephone jacks in wet locations
unless the jack is specifically designed for wet
locations.
17. Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
18. Use caution when installing or modifying
telephone lines
19. Use only the power cord and batteries indicated in
this manual. Do not dispose of batteries in a fire.
They may explode. Check with local codes for
possible special disposal instructions.
SAVE THESE INSTRUCTIONS
Important Safety Instructions
4
Caution: Danger of explosion if battery is
incorrectly replaced. Replace only
with the
same or equivalent type recommended by
the manufacturer. Dispose of batteries
according to the manufacturer's instructions.
1. Use only the approved battery pack
in the handset of your cordless phone.
For Handset Unit: 3.6 V 700mAHr
NiCd Rechargeable Battery
GP70AAS3BMJZ
GPI International Ltd
2. Do not dispose of the battery in
a fire as it may explode. Check with
local codes for possible special
disposal instructions.
3. Do not open or mutilate the battery.
Released electrolyte is corrosive and
may cause damage to the eyes and
skin. It may be toxic if swallowed.
4. Exercise care in handling
batteries in order not to short the
battery with conducting materials
such as rings, bracelets and keys.
The battery or conduction material
may overheat and cause burns.
5. Charge the battery (ies) provided
with or identified for use with this
product only in accordance with the
instructions and limitations specified
in this manual.
6. Observe proper polarity orientation
between the battery pack and the
battery charger.
Safety Instructions for Batteries
5
E
N
G
L
I
S
H
The following items are included as part of
the CS-03 Requirements. The standard
connecting arrangement code for the
equipment is CA11A. This product meets the
applicable Industry Canada technical
specifications.
NOTICE: The Canadian Department of
Communications label identifies certified
equipment. This certification means that the
equipment meets certain telecommunications
network protective operational and safety
requirements. The Department does not
guarantee that the equipment will operate to
the user’s satisfaction. Before installing this
equipment, users should ensure that it is
permissible to be connected to the facilities
of the local telecommunications company.
The equipment must also be installed using
an acceptable method of connection. In
some cases, the company’s inside wiring
associated with a single line individual
service may be extended by means of a
certified connector assembly (telephone
extension cord). The customer should be
aware that compliance with the above
conditions may not prevent degradation of
service in some situations. Repairs to
certified equipment should be made by an
authorized Canadian maintenance facility
designated by the supplier. Any repairs or
alterations made by the user to this
equipment, or equipment malfunctions, may
give the telecommunications company cause
to request the user disconnect the equipment.
Users should ensure for their own
protection that the electrical ground
connections of the power utility, telephone
lines and internal metallic water pipe system,
if present, are connected together. This
precaution may be particularly important in
rural areas. Caution: Users should not
attempt to make such connections themselves,
but should contact the appropriate electric
inspection authority, or electrician, as
appropriate. The Ringer Equivalent Number
is an indication of the maximum number of
termianls allowed to be connected to a
telephone interface. The termination on an
interface may consist of any combination of
devices subject only to the requirement that
the sum of the Ringer Equivalent Number of
all the devices not exceed five.
SAVE THESE INSTRUCTIONS
Important Safety Instructions
6
W425 FEATURES
1. Antenna/Handset Visual Ringer
2. Dial Pad
3. Charge Contacts
4. Channel Button (CH)
5. Talk Button (TALK)
6. Memory Button (MEM)
7. Emergency Memory Storage Buttons
8. Flash Button (FLASH)
9. Mute Button (MUTE)
10. Redial/Pause Button (RD/P)
11. Temporary Tone Button (*)
12. Ringer On/Off
13. Boost Clarity Power On/Off
14. Volume Dial
15. Belt Clip
Getting Started
CH MEM
FLASH MUTE
TALK
RD/P
11
445566
778899
**00##
2233
ABCABC
GHIGHI
PQRSPQRS TUVTUV WXYZWXYZ
JKLJKL MNOMNO
DEFDEF
1
2
4
5
6
7
8
9
10
3
RINGER
OFF ONOFF ON
VOLUMEVOLUME
BOOST
CLARITY POWER
14
13
12
15
11
7
E
N
G
L
I
S
H
W425 FEATURES
1. Visual Ringer
2. Charging Contacts
3. Handset Tab
4. Base Antenna
5. In Use/Charge LED (GREEN)
6. Power LED (RED)
7. Page
Getting Started
POWER
PAGE
IN USE/
CHARGE
1
2
3
4
5
6
7
8
W425 FEATURES
1. Pulse/Tone
2. BOOST On/Off
3. AC Adapter Jack
4. Telephone Line Jack
5. Desk/Wall Mounting Bracket
Getting Started
PULSE/TONEPULSE/TONE BOOST
ON/OFF
BOOST
ON/OFF
TELTEL
9VDC
500mA
9VDC
500mA
USE ONLY WITH CLASS TWO
POWER SOURCE
USE ONLY WITH CLASS TWO
POWER SOURCE
123
4
5
9
E
N
G
L
I
S
H
W425 FEATURES
1. Ringer On/Off
2. Volume Up/Down
3. Ring Style
Getting Started
RINGER
OFF ON
RINGER
OFF ON
VOLUMEVOLUME
RING
STYLE
RING
STYLE
1
23
Tabla de contenidos
Idiomas:
Otros manuales de Teléfono inalámbrico de Ameriphone
