Ameba DigiCap II series Manual de usuario
1
2
About this guide-----------------------------------------------------------------------------------------5
FCC Compliance Statement -------------------------------------------------------------------------5
FCC WARNING ---------------------------------------------------------------------------------------5
License Agreement -------------------------------------------------------------------------------------6
Trademarks ----------------------------------------------------------------------------------------------8
Customer Support--------------------------------------------------------------------------------------8
1. Package content--------------------------------------------------------------------------------------9
2. Before you proceed-------------------------------------------------------------------------------- 10
3. Hardware Installation Process ----------------------------------------------------------------- 11
3-1. Hardware requirement------------------------------------------------------------------- 11
3-2. DVR platform layout --------------------------------------------------------------------- 11
3-3 Install the Central Processing Unit (CPU)-------------------------------------------- 12
3-4. Install Memory module ------------------------------------------------------------------ 14
3-5. Install HDD --------------------------------------------------------------------------------- 15
4. System Configuration ---------------------------------------------------------------------------- 17
4-1. Display Properties ------------------------------------------------------------------------- 19
4-2. Disk Management ------------------------------------------------------------------------- 21
4-3. Setup Network Connections------------------------------------------------------------- 24
4-4. Setup Shared Folders --------------------------------------------------------------------- 25
5. The panel description of DVR system -------------------------------------------------------- 27
5-1. Back panel of DVR system -------------------------------------------------------------- 27
5-2. Front panel of DVR system-------------------------------------------------------------- 29
5-3. The function of Remote Controller ---------------------------------------------------- 32
6. Accessories Program ------------------------------------------------------------------------------ 34
6-1. General Information ---------------------------------------------------------------------- 34
6-2. Setup Video Parameters- EZSetup ---------------------------------------------------- 36
6-3. The Tool Bar of DigiCap II DVR------------------------------------------------------- 40
7. Camera Configuration ------------------------------------------------------------------------- 52
7-1. General Setup------------------------------------------------------------------------------- 52
3
7-2. Video and Audio Recording Installation---------------------------------------------- 54
7-3. Motion setting ------------------------------------------------------------------------------ 55
7-4. Notification ---------------------------------------------------------------------------------- 57
7-5. Video Loss ----------------------------------------------------------------------------------- 60
7-6. Camera position Authentication alarm ----------------------------------------------- 61
7-7. Video/Audio Recording Schedule ------------------------------------------------------ 62
7-8. Setting up PTZ camera and I/O configuration ------------------------------------- 64
7-9. Set Up Privileges --------------------------------------------------------------------------- 69
7-10. Playing Back and Smart Search Video Files--------------------------------------- 71
7-11. Playing back across Local Area Network (LAN)--------------------------------- 77
7-12. Using Dynamic IPAddresses for Internet Access --------------------------------- 79
7-13. How to set notification and trigger devices when alarm------------------------- 82
7-14. Setting Up Notification------------------------------------------------------------------ 83
7-15. Setting Up a Software Motion Detection Area------------------------------------- 85
7-16. How to Trigger Speed Dome Camera ----------------------------------------------- 86
7-17. Creating an Alarm Wave File --------------------------------------------------------- 87
7-18. Using TV Out For Call Monitor Site------------------------------------------------- 88
7-19. Back up the video clips------------------------------------------------------------------ 91
7-20. Adjust the time clock of DVR automatically--------------------------------------- 93
7-21. Two way audio communication ------------------------------------------------------- 94
8. Remote Client Software Installation -------------------------------------------------------- 96
8-1. System Requirement for Remote client software----------------------------------- 96
8-2. FreeView Pro Installation (Remote Client PC — TCP/IP viewer) ------------- 96
8-3. AnyView Pro Installation (Remote Client PC --- Modem to modem) --------- 97
9. Using FreeView Pro (For TCP/IP viewers) -------------------------------------------------- 98
9-1. General Information ---------------------------------------------------------------------- 98
9-2. The FreeView Pro Tool Menu Bar ----------------------------------------------------- 99
9-3. Connecting to Local DVR Server by FreeView Pro ------------------------------101
9-4. Video Window Function Description-------------------------------------------------104
4
9-5. Using the Site Book-----------------------------------------------------------------------106
9-6. System Configuration--------------------------------------------------------------------107
9-7. Playing Back Video Clips ---------------------------------------------------------------109
9-8. Remote download video clips ----------------------------------------------------------112
9-9. Remote Setting the Parameters of DigiCap II DVR ------------------------------113
10. Connect the Local DVR Server via IE Browser -----------------------------------------114
11. Using PDAView Pro (For Pocket PC PDA only) -----------------------------------------116
11-1. The PDAView Installation -------------------------------------------------------------116
11-2. The PDAView Pro Tool Menu Bar --------------------------------------------------117
11-3. Connecting PDAView Pro to DigiCap PRO/XP DVR site ---------------------118
11-4. Using the Site Book ---------------------------------------------------------------------118
12. Using AnyView Pro (For Modem to modem viewers) ----------------------------------119
12-1. General Information -------------------------------------------------------------------119
12-2. The AnyView Pro Tool Menu Bar ---------------------------------------------------120
12-3. Connecting to Local DVR Server by AnyView Pro -----------------------------120
12-4. Video Window Function Description -----------------------------------------------121
12-5. Using the Site Book ---------------------------------------------------------------------121
12-6. System Configuration ------------------------------------------------------------------121
12-7. Playing Back Video Clips--------------------------------------------------------------121
5
About this guide
Conventions used in this guide
To make sure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT: Information that you must follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: This device may not cause harmful interference, and this device must accept any
interference received, including interference that may cause undesired operation.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
9
1. Package content
Thank you for buying the I-View DigiCap II Stand Alone DVR (Digital Video Recorder).
Before you start installing the Stand Alone DVR, and hardware devices on it, check the items in
your package with the list below,
DigiCap II Stand Alone DVR
Application program CD and Nero CD
2 x SATA disk cable and 1 x 80-conductor IDE cable
Remote controller and battery
1 x 16 channel Audio input cable and 1 x A/V cable (Digi-1600XP-A only)
1 x 16 channel video input cable (Digi-3200Pro only)
16 channel video loop cable (Optional)
2 x Ear panel (For 19” Rack mount)
Screws (For Hard disk and Ear panel)
USB Mouse & DVI to VGA converter (For second monitor)
User manual & Power cable
If any of the above items is damaged or missing, contact your retailer.
10
2. Before you proceed
Take note of the following precaution before you install the components (CPU, HDD and RAM).
1. Unplug the power cord from the wall socket before touching any component.
2. Use a grounded wrist strap or touch a safety grounded object or to metal object, such as the
power supply case. Before handing components to avoid damaging them due to static
electricity.
3. Hold components by the edges to avoid touching the ICs on them.
4. Whenever you uninstall any components, place it on a grounded antistatic pad or in the bag
that came with the component.
5. Before you install or remove any component, ensure that the power supply is switched off
or the power cord is detached from the power supply. Failure to do so may cause severe
damage to DVR, peripherals, ans/or components.
11
3. Hardware Installation Process
3-1. Hardware requirement
Pentium 4 530 GHz CPU Socket 775 (LGA775) minimum for Digi-1600XP and Digi-800XP.
Pentium 4 530 GHz CPU Socket 775 (LGA775) or above for Digi-800Pro, Digi-1600Pro and
Digi-3200Pro when you use full speed (480/400 FPS) recording rate.
1 G RAM (DDR 400 512 MB RAM x 2 pcs) with low-resolution (360*240) video recording.
1.5 G RAM (DDR 400 512 MB RAM x 3 pcs) with low-resolution (720*480) video recording.
7200 RPM hard drive speed or better recommended.
Speakers are required for sound alarm/effects.
Microphone with 2Vp-p output required for audio recording.
3-2. DVR platform layout
To set up your Stand Alone DVR hardware installation, you must complete the following steps.
The platform layout will be changed, so please refer to the inside cover cap of DVR before
you start to install the parts.
12
3-3 Install the Central Processing Unit (CPU)
3-3.1 Installing the CPU
The DVR’s board comes with a surface mount Socket 775 (LGA775) design for Intel Pentium 4
Processor in the 755-land package.
Fig.3-3.1 Fig.3-3.2
Fig.3-3.3 Fig.3-3.4 Fig.3-3.5
Follow these steps to install a CPU
1. Locate the CPU socket on the platform. (Fig. 3-3.1).
2. Press the load lever with your thumb (A) and remove it to the left (B) until it is released from the
retention tab. (Fig. 3-3.2)
3. Lift the load lever in the direction of arrow to a 135-degree angle. (Fig. 3-3.3)
4.Lift the load plate with your thumb and forefinger to a 100 degree angle (A), then push the PnP cap
from the load plate window to remove (B). (Fig. 3-3.4)
5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of
the socket. The socket alignment key should fit into the CPU notch. (Fig. 3-3.5)
13
Fig. 3-3.6
6. Close the load plate (A), then push the load lever (B) until it snaps into the retention tab. (Fig. 3-3.6)
The CPU fits in only correct orientation.
1. Unplug the power cord from the wall socket before touching any component.
2. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and
damage the CPU!
Fig.3-3.7 Fig.3-3.8
3-3.2 Installing the heat sink and fan
1. Place the heat sink on the top of the installed CPU, making sure that the four fasteners match the
hole of platform.
2. Push down two fasteners at a time in a diagonal sequence to secure the heat sink and fan assembly in
place.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de DVR de Ameba
