AMD LE-363 Manual de usuario

LE-363

3.5 inch Embedded Motherboard

User’s Manual

Edition 1.0

2005/9/16

LE-363 User’s Manual

reserved. The information in this document is subject to change without prior notice to

make improvements to the products.

This document contains proprietary information and protected by copyright. No part of this

document may be reproduced, copied, or translated in any form or any means without prior

written permission of the manufacturer.

All trademarks and/or registered trademarks contains in this document are property of their

respective owners. Disclaimer

The company shall not be liable for any incidental or consequential damages resulting from

the performance or use of this product.

The company does not issue a warranty of any kind, express or implied, including without

limitation implied warranties of merchantability or fitness for a particular purpose.

The company has the right to revise the manual or include changes in the specifications of

the product described within it at any time without notice and without obligation to notify any

person of such revision or changes.

Trademark

All trademarks are the property of their respective holders.

Any questions please visit our website at http://www.commell.com.tw

LE-363 User’s Manual

Packing List

Please check the package before you starting setup the system

Hardware:

LE-363 little board x 1

Cable Kit:

44-pin

40-pin

44-pin

44-pin ATA33 IDE Cable x 1

USB Cable x 1

COM port & Printer Port Cable x 1

PS/2 keyboard & mouse cable x 1

Audio Cable x 1 Floppy Cable x 1

1 to 3 power

output cable

Other Accessories:

Divers CD (including User’s Manual) x 1

Printed User’s Manual x 1

LE-363 User’s Manual

Index

Chapter 1 <Introduction>...............................................................6

1.1 <Product Overview> ......................................................................6

1.2 <Product Specification>.................................................................7

1.3 <Mechanical Drawing>..................................................................9

1.4 <Block Diagram>.........................................................................10

Chapter 2 <Hardware Setup> ......................................................11

2.1 <Connector Location>..................................................................11

2.2 <Jumper Location & Reference>.................................................12

2.3 <Connector Reference>................................................................13

2.3.1 <Internal Connector> ........................................................13

2.3.2 <External Connector> .......................................................13

2.4 <CPU & Memory Setup>.............................................................14

2.4.1 <CPU>...............................................................................14

2.4.2 <Memory>.........................................................................14

2.5 <CMOS Setup>............................................................................15

2.6 <Enhanced IDE & CF Interface>.................................................16

2.7 <Floppy Port>...............................................................................17

2.8 <Ethernet Interface>.....................................................................18

2.9 <Onboard Display Interface>.......................................................19

2.10 <Onboard Audio Interface> .......................................................26

2.11 <Serial Port>...............................................................................27

2.12 <GPIO Interface>.......................................................................28

2.13 <Power Supply>.........................................................................29

2.13.1 <Power Input>.................................................................29

2.13.2 <Power Output>..............................................................29

2.14 <Switch and Indicator>..............................................................30

Chapter 3 <BIOS Setup>..............................................................31

Appendix A <I/O Pin Assignment>..............................................33

A.1 <IDE Port> ..................................................................................33

LE-363 User’s Manual

A.2 <Floppy Port>..............................................................................34

A.3 <IrDA Port>.................................................................................34

A.4 < VGAPort >...............................................................................34

A.5 <Serial Port>................................................................................35

A.6 <LAN Port>.................................................................................35

A.7 <PS/2 Keyboard & Mouse Port>.................................................35

A.8 < USB Interface >........................................................................35

A.9 < LPT Prot >……………………………………………..36

Appendix B <Flash BIOS>...........................................................37

B.1 BIOS Auto Flash Tool ............................................................37

B.2 Flash Method..........................................................................37

Appendix C <System Resources>..............................................39

C.1 <I/O Port Address Map> .............................................................39

C.2 <Memory Address Map>.............................................................41

C.3 <System IRQ & DMA Resources> .............................................42

C.3.1 <IRQ>...............................................................................42

Appendix D <Programming GPIO’s>..........................................43

Appendix E <Programming Watchdog Timer > .........................44

Contact Information .....................................................................45

LE-363 User’s Manual Introduction

Chapter 1 <Introduction>

1.1 <Product Overview>

LE-363 is the 3.5 inches embedded motherboard with AMD Geode GX533 platform, with

onboard VGA, AC97 audio, dual LAN and DC 12V input interface. Based on the AMD

Geode GX533 processor, the board provides many advanced features for reduced power

consumption, fanless design and high cost/price rate of production.

Low Power Consumption

Based on the AMD Geode GX533@400MHz processor onboard, it only takes up to 8.4W

at maximum powering, and is completely suitable for fanless design. Without any cooling

fan onboard, it can avoid the heat problem when the cooler failed in accidence.

Onboard TTL/LVDS LCD interface

Based on the AMD Geode GX533@400Mhz of integrated graphics, the board provides

onboard graphics with up to 4/8/12/16 MB of frame buffer, 18-bit/24-bit LVDS and 24-bit

TTL interfaces.

Embedded Component

Due to the low profile design, the board provides PCMICA card Bus, CF card socket for

flash disk with porting embedded OS and up to 512MB of DDR SO-DIMM.

Single Voltage Input

The board only requires DC 12V input; user’s can easily connect the board with an adapter

without the huge power supply.

Product Overview

LE-363 User’s Manual Introduction

1.2 <Product Specification>

General Specification

Form Factor 3.5 inches embedded motherboard

CPU Embedded AMD Geode GX533 400MHz

Fanless with heatsink only

Memory 1 x 200-pin DDRSO-DIMM up to 512MB

Unbufferred, none-ECC memory supported only

Chipset AMD Geode CS5535

USB Port Two internal USB1.1 ports

BIOS Phoenix-Award PnP flash BIOS

Green Function Power saving mode includes doze, standby and suspend modes.

ACPI version 1.0 and APM version 1.2 compliant

Watchdog Timer System reset programmable watchdog timer

Real Time Clock Chipset built-in RTC with lithium battery

Enhanced IDE One Ultra DMA33 IDE interface supports up to 2 ATAPI devices

One 44-pin IDE port onboard

Multi-I/O Port

Chipset WINBOND W83627HF

Serial Port One external RS232 and one internal RS232

Parallel Port One 26-pin internal parallel port

Floppy Port One slim type Floppy port

IrDA Port One IrDA compliant Infrared interface supports SIR

K/B & Mouse External PS/2 keyboard and mouse ports on rear I/O panel

GPIO One 12-pin Digital I/O connector with 8-bit programmable I/O

interface

Hardware

Monitor Fan speed, CPU temperature and voltage monitoring

VGA Display Interface

Chipset AMD Geode GX533 built-in VGA controller with 2D engine

Memory BIOS selectable up to 4/8/12/16 MB shard with system memory

Display Type CRT, LCD monitor with analog display

18-bit/24-bit LVDS/24-bit TTL with LCD interface

Connector External DB15 female connector on rear I/O panel

Onboard 40-pin TTL connector

Onboard 40-pin LVDS connector

Onboard 5-pin backlight inverter connector

Solid State Disk Interface

Compact Flash 1 x Compact Flash Card Type I socket on solder side

DOM Onboard 44-pin IDE support DOM (Disk On Module)

PCMCIA Card PCMICA Type I/II slot

Product Specification 7

LE-363 User’s Manual Introduction

Ethernet Interface

Controller Dual PCI based REALTEK 8100B controller

Type 10Base-T / 100Base-TX, auto-switching Fast Ethernet

Full duplex, IEEE802.3U compliant

Connector Two external RJ45 jack on I/O panel

Audio Interface

Controller REALTEK ALC201A AC97 codec

Output Interface Line-in, Line-out, CD-in, MIC-in

Connector Onboard 10-pin header

Expansion Interface

Mini PCI Onboard Mini PCI socket for Type III (32bit,33Mhz)

Power and Environment

Power

requirement DC 12V input

1 x DC jack on I/O panel

1 x Onboard 4-pin 12V DC connector

Input Voltage 10.5V ~ 13V

Input Current 12V/0.7A 8.4W (board only)

Dimension 146mm x 101mm (L x W)

Temperature Operating within 0 ~ 60oC (32 ~ 140oF)

Storage within -20 ~ 85oC (-4 ~ 185oF)

Driver support

Windows Windows XP/XPe, Win2000 and WinCE

Linux Kernel version 2.4 or later

Ordering Code

LE-363P 3.5 inches embedded motherboard with onboard AMD GX533

400MHz processor, VGA, audio, dual LAN, USB, CF, TTL/LVDS

PCMAIC ,Mini PCI , GPIO

LE-363-128 Same as LE-363P and with onboard DDR 128M

Product Specification

LE-363 User’s Manual Introduction

1.3 <Mechanical Drawing>

Mechanical Drawing 9

LE-363 User’s Manual Introduction

1.4 <Block Diagram>

AMD Geode GX533 Processor

VGA monitor

TTL/LVDS LCD

DDR SO-DIMM up to 512MB

8100B

PCI/33Mhz

Mini PCI slot

PCMCIA

Arbitor

IT8209

8100B

CS5535

USB1.1 X 2

AC97 Audio

GPIO

Floppy

Serial Port

Parallel Port

Ultra DMA33 IDE

IrDA

BIOS

Block Diagram

Otros manuales para LE-363

Tabla de contenidos

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario