Amada CL-P115A Manual de usuario
Scanner Power Supply Unit
CL-P115A/P148A
OPERATION MANUAL
AA05OM1203804-05
Original instructions
1
CL-P115A/P148A
About This Documentation
Thank you for purchasing our CL-P115A/P148A Scanner Power Supply Unit.
Please read this manual carefully to ensure correct use of the product. Keep the
manual handy after reading for future reference.
This document for the CL-P115A/P148A Scanner Power Supply Unit describes
installation and system specifications.
1. Note
•Company and product names in this manual are trademarks or registered
trademarks of their respective owners.
•Unauthorized reproduction of this manual in whole or part is prohibited.
•The contents of this manual are subject to change without notice.
•Every effort has been made to ensure the accuracy of this information. If you come
across oversights or errors, please notify your dealer.
•Be sure to read the user's manuals for any equipment used in conjunction with the
system (e.g., documentation for computer systems).
2. Symbols Used in this Manual
About This Documentation
Indicates instructions that must be followed to prevent hardware or software
damage or operating errors.
Indicates additional information on a particular topic.
Menus, icons, buttons,
windows, tabs Enclosed in brackets.
Example: Click the [OK] button.
Keyboard keys Enclosed in angle brackets.
Example: Press the <Tab> key.
References Enclosed in quotes.
Example: Refer to "Chapter 8-3.2 Changing Passwords" (page 5).
CAUTION
㪘㪫㪫㪜㪥㪫㪠㪦㪥
Contents
2
CL-P115A/P148A
Contents
About This Documentation....................................................................... 1
1 Note...................................................................................................................... 1
2 Symbols Used in this Manual............................................................................... 1
Chapter 1 Special Precautions ............................................................ 3
1 Safety Precautions ............................................................................................... 3
2 Operating Precautions.......................................................................................... 6
3 For Disposal ......................................................................................................... 6
Chapter 2 Features.............................................................................. 7
Chapter 3 System Configuration.......................................................... 8
1 Overall Configuration............................................................................................ 8
2 Name and Functions of Each Section .................................................................. 9
Chapter 4 Installation......................................................................... 10
1 Unpacking .......................................................................................................... 10
2 Installation .......................................................................................................... 11
Chapter 5 Specifications.................................................................... 12
1 Basic Specifications ........................................................................................... 12
2 Accessories ........................................................................................................ 13
Chapter 6 Outline Drawing................................................................. 14
1. Safety Precautions
3
CL-P115A/P148A
Chapter 1 Special Precautions
1. Safety Precautions
Read these Safety Precautions thoroughly before use to ensure correct use of the
system.
•The precaution points indicated here are intended to ensure safe operation of the
system and prevent hazards or injury to users and other personnel.
They are important details relating to safety and must be read carefully.
•The indications have the following meanings.
Chapter 1 Special Precautions
Indicates that incorrect operation risks death or serious injury to personnel.
Indicates that incorrect operation may result in death or serious injury to
personnel.
Indicates that incorrect operation may result in injury to personnel or damage to
property.
Indicates prohibited actions and warns of actions not covered by the product warranty.
Indicates actions that must be performed by users.
The triangular symbol indicates details that supplement DANGER, WARNING, or CAUTION points.
DANGER
WARNING
CAUTION
1. Safety Precautions
4
CL-P115A/P148A
Never dismantle, repair, or modify the system. Doing so may result in electric
shock or fire.
Otherwise there is a risk of electric shock or fire. Do not attempt maintenance other than
that described in the Operation Manual.
Never burn, destroy, cut, crush or chemically decompose the system.
This product incorporates parts containing gallium arsenide (GaAs).
Do not damage power or connector cables.
Do not crush, twist, or pull cables. Damaged cables may result in electric shock, short-
circuiting, or fire.
Contact your dealer or us. if repair or replacement is necessary.
Connect securely using the specified cables.
Using cables with inadequate capacity or improper connections may result in fire or
electric shock.
Ground the Unit.
If the Unit is not grounded, you may get an electric shock when there is trouble or electricity
leaks.
Connect optical fibers securely.
Improper connection may result in burn injuries or fire.
Stop using the system if a problem arises.
If a problem occurs such as a burning smell, abnormal noise, overheating, or smoke
emission, continuing to use the system may result in electric shock or fire.
Contact your dealer or us immediately.
Wear protective work clothing.
Wear protective clothing such as gloves, long-sleeved clothing, and a leather apron.
Spatter will cause burn injuries if it lands on the skin.
DANGER
WARNING
1. Safety Precautions
5
CL-P115A/P148A
Chapter 1 Special Precautions
Keep away from water.
Subjecting electrical components to water may result in electric shock or short-circuiting.
Install in a firm location.
Otherwise there is a risk of injury if the system topples or falls from the installation
location.
Provide fire extinguishers.
Fire extinguishers must be provided in the welding work area in case of fire.
Inspect and maintain the system periodically.
Inspect and maintain the system periodically, repairing damaged parts and components
before use.
Keep connector plugs clean and insert fully.
There is a risk of overheating and fire if dust is allowed to accumulate or if plugs are not
fully inserted.
Hold the plug body when inserting or removing.
There is a risk of damage to the cable and electric shock or fire if the cable is pulled to
unplug.
Do not cover with blankets or sheets.
Do not cover the system with blankets or sheets while in use. Otherwise there is a risk of
over-heating and fire.
CAUTION
2. Operating Precautions
6
CL-P115A/P148A
2. Operating Precautions
(1) The system should be used in an ambient temperature range of 5°C to 40°C and
humidity 20% to 85% RH with no sudden temperature fluctuations. Avoid using the
system in the following locations.
•Locations with dust or oil mist present
•Locations subject to vibration or impact
•Locations in which chemicals are used
•Locations subject to high noise
•Locations susceptible to condensation
•Locations with high concentrations of CO2, NOx, or SOx
(2) The exterior of the system should be wiped clean using a soft or moist cloth. If the
exterior is particularly dirty, wipe clean using diluted detergent or alcohol.
(3) Do not drop foreign objects such as screws inside the system, as this may result in
failure of the system.
(4) Operate the system as described in the attached Operation Manual.
[Warning/Caution label details]
3. For Disposal
This product incorporates parts containing gallium arsenide (GaAs). At the time of
disposal, separate it from general industrial waste or domestic waste and carry out
the disposal in accordance with applicable laws and regulations.
Warning label of the charging unit
Location:
Near the power supply connector on the
rear surface
7
CL-P115A/P148A
Chapter 2 Features
The scanner power supply unit CL-P115A/P148A is the power supply unit for the laser
control unit CL-E100A series.
The CL-P115A supplies power to the laser control unit CL-E100A and the scanner
head unit CL-H201A.
The CL-P148A supplies power to the laser control unit CL-E100A and the scanner
head unit CL-H601A.
The CL-P115A/P148A has the following features.
•Compact body corresponding to 19-inch 1U rack
The outline is 482.6 x 547 x 320 (mm) and the weight is 5 kg. The CL-P115A/P148A
is 19-inch 1U rack size and can be installed anywhere.
•Applicable power supplies
The CL-P115A/P148A can be used with single-phase 200-240 V AC (50/60 Hz)
power supply.
•Applicable to ±15 V DC or 48 V DC scanner
The CL-P115A can be used with the scanner of ±15 V DC input. The CL-P148A can
be used with the scanner of 48 V DC input.
Chapter 2 Features
1. Overall Configuration
8
CL-P115A/P148A
1. Overall Configuration
Chapter 3 System Configuration
Computer
Laser equipment
Scanner head unit
Laser control unit
Scanner power supply unit
Optical fiber
LAN cable
Scanner
connecting
cable
Power cable for scanner
Power cable for
control unit
Laser
equipment
connecting
cable
Camera
connecting
cable
Camera unit
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Fuente de alimentación de Amada
Amada
Amada MD-A8000B-05 Series Manual de usuario
Amada
Amada HF2 Manual de usuario
Amada
Amada IS-800CR Manual de usuario
Amada
Amada IP-500A Manual de usuario
Amada
Amada IP-100D Manual de usuario
Amada
Amada S-2200CA Manual de usuario
Amada
Amada 125ADP Manual de usuario
Amada
Amada IP-400B Manual de usuario
Amada
Amada MIH-200A Manual de usuario
Amada
Amada PULSETIG MAWA-050A Manual de usuario
