Altura Photo AP-C1001 FLASH Manual de usuario
USER’S MANUAL
AP-C1001 FLASH
For video tutorials about your product(s),
customer support, updated user manuals, and all
other Altura Photo news please visit:
www.AlturaPhoto.com
Guide Number: 68 Meters (223 ft)
Power Ratio: 1/1 – 1/128
Recycle Time: 4 Seconds
Power Supply: 4×AA Size Batteries. Alkaline or Ni-MH
Recommended
5 Flash Modes: TTL, Manual, Strobe, Slave1, & Slave2
180° bounce, swivel, and zoom head.
Wireless Trigger Sensor
Compatible With E-TTL Flash Functions
Off-Camera Flash Lighting Support (S1/S2 Mode)
Power Saving Sleep Mode
Accurate Brightness Control
FEATURES
Large Backlit LCD Display
Metal Hot Shoe With Electrical Pin Components
Built-In Flip Down Wide Angle Flash Diffuser And Reflection
Panel
Automatic Temperature Detection (Overheating Protection)
Memory Function Saves Previous Settings
Product Dimensions: 2.9” x 3.2” x 5”(6.5” With Extended
Head)
Weight: 9.9 Oz.
Includes:
Flash Stand With 1/4” Tripod Input
Hard Diffuser
High Quality Protective Pouch With Battery Holder & Belt
Strap
6
7
8
9
1
2
3
4
5
1. Reflector panel
2. Wide-angle diffuser
3. Flash head
4. Wireless trigger sensor
5. Battery cover
6. Hot Shoe
7. Locking ring
8. Hot shoe pin
9. Locking pin
COMPONENTS
10. LCD display
11. Mode switch button
12. LED Indicator
13. Test button
14. Zoom button
15.Power ON/OFF
16. Adjustment Buttons
<left right button>
17. SET button
PILOT MODE ZOOM ON/OFF
10
13
11
12
16
15
14
16
17
1. Insert Batteries
a. Slide the battery compartment cover in the
direction of the arrow to open.
b. Follow the directions on the inside of the
compartment cover. Insert the batteries in
the corresponding positive & negative slots.
c. Make sure to completely close the battery
compartment.
INSTALLATION
Note: Please use only 4 new AA batteries. Using used
or damaged batteries could cause damage or short
circuiting in your flash unit.
1
2
abc
1
2
2. Install the Altura Photo Full Auto-Focus TTL Flash
Unit onto the Camera
a. Turn off the flash and camera
b. Rotate the locking ring in the
counter-clockwise direction to loosen it.
c. Mount the flash unit onto the camera’s hot
shoe insert.
d. Once adequately placed, rotate the locking
ring clockwise until snugly tightened.
bcd
Tabla de contenidos
Otros manuales de Flash de la cámara de Altura Photo
Altura Photo
Altura Photo AP-N1001 Manual de usuario
Altura Photo
Altura Photo AP-305C Manual de usuario
Altura Photo
Altura Photo AP-FLS-UNV1 Manual de usuario
Altura Photo
Altura Photo AP-305S Manual de usuario
Altura Photo
Altura Photo AP-305N Manual de usuario
Altura Photo
Altura Photo AP-UNV1 Manual de usuario
