Altronix TROVE Trove1AG1R Manual de usuario
Trove1AG1R
- Trove rack enclosure with
AMAG M4000/Altronix backplane (TAG1R)
Access & Power Integration
Rev. TAGR110419
Installing Company: _______________ Service Rep. Name: __________________________________
Address: _____________________________________________ Phone #: __________________
More than just power.TM
Installation Guide
All registered trademarks are property of their respective owners.
- 2 - Trove1AG1R Installation Guide
Overview:
Altronix Trove1AG1R rack mount access & power integration solution accommodates AMAG Symmetry M4000
boards with Altronix power supplies and sub-assemblies for access systems.
Specifications:
Agency Listings:
• CE European Conformity.
Trove1AG1R
Trove1R rack mount enclosure with TAG1R Altronix/AMAG backplane.
• 16 Gauge black enclosure with ample knockouts for convenient access.
• Modular 2U standard EIA 19” drawer with extendable slides up to 48”.
• Dimensions (H x W x D): 3.375” x 19.0” x 26.5” (85.8mm x 482.6mm x 673.1mm).
• Includes tamper switch (Altronix Model TS112 or equivalent) and cam lock.
TAG1R
Altronix/AMAG backplane.
• 16 Gauge backplane.
• Dimensions (H x W x D): 18.5” x 15.25” x 0.3125” (469.9mm x 387.4mm x 7.9mm).
Optional Accessories:
• RE2: Rack Mount Battery Enclosure accommodates up to four (4) 12VDC/7AH batteries
• WM5, WM25, WM100: Magnetic Cable Tie Mounts (5, 25, 100 counts).
• LC3: 6 ft. three-wire line cord.
Backplane Accommodates a Combination of the Following:
Altronix:
• One (1) eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB, ACMS8(CB) or ACM8(CB).
• Up to two (2) ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), or VR6.
AMAG:
• Up to two (2) M4000-DEC4, M4000-IOC20/16.
Hardware and Accessories:
Spacer | 5/16” Pan Head Screw | Lock Nut
Trove1AG1R Installation Guide - 3 -
Installing Trove1R into Rack Tower:
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local
codes and authorities having jurisdiction. These products are for indoor use only and must be installed within
the protected premises.
Note: First assemble and Install Z Bracket Wire Management Accesory
(refer to Z Bracket Installation pg. 4)
1. Remove backplane from enclosure prior to installing into rack cabinet
(do not discard hardware).
2. In order to mount included UL Listed tamper switch (Altronix Model TS112 or
equivalent) turn the enclosure upside down. Punch out the knockout in
designated location, on the back of the unit, from outside of the drawer
(Fig. 1, pg. 3). Insert the tamper switch into the knockout from outside of the
drawer with the button facing outwards and spaded connectors inside the drawer.
Connect tamper switch wiring to the Access Control Panel input or the
appropriate UL Listed reporting device.
To activate alarm signal open the rack drawer.
3. Slide the rack enclosure into an open 2U location in the four post rack cabinet.
4. Utilizing proper fasteners attach front ears to the rack rails.
5. Attach the rear of the adjustable slides to the rear rails of the rack cabinet with the proper fasteners.
6. Secure the rack cover (Fig. 2a, pg. 3) and rack drawer to earth ground (Fig. 2b, pg. 3).
7. Ensure that all internal cofigurations (voltage selection, switch settings, etc.) are completed before
mounting backplane back into Trove rack enclosure.
Fig. 1
Back of the drawer,
viewed from outside.
Tamper Switch
mounting location
Fig. 2
Fig. 2a
Fig. 2b
- 4 - Trove1AG1R Installation Guide
Assembling and Attaching
Z Bracket Wire Management Accessory (included):
Altronix Trove Rack enclosures include Z Bracket, a convenient and reliable wire management accessory.
Hardware (included):
Ten (10) bolts and eight (8) lock nuts.
1. Carefully unpack Z Bracket. Do not discard hardware
(included) (Fig. 3, pg. 4).
2. Attach arms to each other using bolts and
lock nuts (Fig. 3a, pg. 4).
3. Attach the hinge brackets to the ends of
arms using bolts and nuts positioning
them as shown on (Fig. 3b, pg. 4).
4. Make sure that all nuts are tightened.
5. Attach the hinge bracket on the longer side of Z Bracket to the adjustable slide using bolts and lock nuts
(included) (Fig. 4, 4a, pg. 4).
6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts
(included).
Fig. 4
Fig. 4a
Fig. 3b
Two (2)
Fig. 3
Fig. 3a
Trove1AG1R Installation Guide - 5 -
TAG1R:
Configuration of Altronix Power Supply and/or Sub-Assembly Boards and AMAG Boards
1. Fasten spacers onto metal pems configuration (A), (B), (C), (D) or (E) of backplane depending on the board
(Fig. 5, pg. 5).
2. Position access controller module over corresponding spacers and fasten screws into spacers (Fig. 5a, pg. 5).
3. Mount backplane to enclosure with hardware.
Position Chart for the Following Models:
Altronix Power Supply/Charger or Sub-Assembly Pem Mounting
eFlow4NB, eFlow6NB, eFlow102NB, or eFlow104NB A
ACM8(CB), ACMS8(CB) B
ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), PD16W(CB) or VR6 C D
AMAG Controllers Pem Mounting
M4000-DEC4, M4000-IOC20/16 E
Fig. 5
Metal
Spacer
Placement
for Altronix
Power
Supplies
A
B
C
D
D
E
E
Pem
Spacer
Backplane
Power Supply
or
Sub-Assembly
Pan Head Screw
Fig. 5a
- 6 - Trove1AG1R Installation Guide
Notes:
Trove1AG1R Installation Guide - 7 -
TAG1R Backplane Dimensions (H x W x D):
18.5” x 15.25” x 0.3125” (469.9mm x 387.4mm x 7.9mm)
15.25” (387.4mm)
18.5” (469.9mm)
- 8 - Trove1AG1R Installation Guide
Trove1R Enclosure Dimensions:
3.375” x 19.0” x 26.5” (85.8mm x 482.6mm x 673.1mm). Shown with Z Bracket attached.
0.1”
2.5mm
1.5”
38.1mm
11.175” (283.8mm)
Tamper
Switch
3/4” Conduit
1” Conduit
Conduit
3/4”
1/2”
2.4”
61mm
4.57”
116.1mm
3.375”
85.8mm
26.5”
673.1mm
19” (482.6mm)
R 1.27” (32.3mm)
1” (25.4mm)
0.55” (14mm)
3.62”
92mm
Altronix is not responsible for any typographical errors.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
IITrove1AG1R D09V MEMBER
Tabla de contenidos
Otros manuales de Recinto de Altronix
Altronix
Altronix Trove T1PHK1F4S Manual de usuario
Altronix
Altronix TROVE Trove3WC Series Manual de usuario
Altronix
Altronix Trove Series Manual de usuario
Altronix
Altronix Trove1M1R Manual de usuario
Altronix
Altronix Trove1HW1R Manual de usuario
Altronix
Altronix Trove T2MK3F4D Manual de usuario
Altronix
Altronix Trove1HW1R Manual de usuario
Altronix
Altronix TROVE T1MK1F4 Manual de usuario
Altronix
Altronix T2MK3F4D Manual de usuario
Altronix
Altronix Trove1V1R Manual de usuario
Altronix
Altronix TROVE Trove1PD1 Manual de usuario
Altronix
Altronix Trove2AG2 Manual de usuario
Altronix
Altronix Trove T1RSH3F8 Manual de usuario
Altronix
Altronix Trove2M2R Manual de usuario
Altronix
Altronix TROVE Trove2HW2 Manual de usuario
Altronix
Altronix Trove1M1R Manual de usuario
Altronix
Altronix Trove1V1R Manual de usuario
Altronix
Altronix Trove2DM2 Manual de usuario
Altronix
Altronix Trove 1AL1R Manual de usuario
Altronix
Altronix Trove T3MK75F16 Manual de usuario
