Altec Lansing Hydrabuds Sport Manual de usuario
QUICK START GUIDE ITEM: MZX6100
Hydrabuds Sport
Truly Wireless Earphones
ITEM:
VOICE COMMANDS
IN THE BOX
1.
1 Hydrabuds Sport
1 Pair S, M, L Silicone Ear Tips
1 Pair S, M, L Memory Foam Ear Tips
1 Pair S, M, L Helix Wings™
1 Pair Bumpers
1 Charging Case
1 USB-C Charging Cable
1 Quick Start Guide
A CLOSER LOOK
3.
Status LED
Indicators
Battery Level
LED Indicators
Charging Case
Right
Earbud
Left
Earbud
Multifunction Button
Battery Level
Display Button
CHARGING
4.
Charging Case Battery Level
1. To power the charging case, insert the USB-C cable into
the charging port located at the back of the charging case.
2. Insert the standard USB cable into any suitable USB port.
3. The Battery Level LED Indicators will light up according to
the battery capacity.
4. You can see the case battery level at any time by
pressing the button on the right hand side of the case.
1
2
0-24%
25-49%
50-74%
75-99%
100%
3
4
BLUETOOTH PAIRING
5.
AL Hydrabuds Sport
Available devices
Bluetooth
Multipoint Bluetooth Connection:
With the multipoint connection function, you can connect up to
two devices with your earbuds (i.e. a smartphone and a
computer).
•To activate multipoint connection, go to the Bluetooth menu of
the device already paired to your earbuds and turn Bluetooth
OFF. The earbuds will disconnect from your device and become
available for pairing to a second device.
•Pair earbuds to your second device.
•Turn Bluetooth back ON on your first device and the earbuds will
auto-reconnect to it. You now have two devices paired and can
use either for music or calls.
Low Battery
Charging
Fully Charged
Powering ON/Pairing:
When the case is opened the earbuds will first connect to
each other then enter pairing mode.
When in the case the earbud LEDs show their charge status:
Bluetooth Connection:
Go to the Bluetooth page in the settings
app on your phone. Make sure Bluetooth
is ON before connecting to the available
device ‘AL HydraBuds Sport’.
When removed from the case the earbud LEDs
show their pairing status:
Pairing
Connected
**Note: If the earbuds have been previously paired to a
nearby device they will automatically re-connect to it.
EARBUD CONTROLS
6.
When in the case the earbud LEDs show their charge status:
Controlling Calls
Controlling Music
L R
L
R
L
R
Press 3x
Press 2x
Press 2x
Press either
Press and hold either
Press and hold either
Press either
Press 3x
+
-
L R
L R
L R
X
**Note: The Hydrabuds Sport click each time you perform a single press.
MORE CONTROLS
7.
L
L
Reset
Other Functions
To activate phone Voice Assistant,
press and hold to first beep then let go.
To turn ON/OFF ambient awarness mode,
press the left earbud.
Earbuds must be disconnected from Bluetooth and removed
from case in order to reset.
To perform a factory reset, press and hold for 6 seconds. This erases all
settings.
To perform a hardware reset (restarts earphones), press and hold for 10
seconds.
Hardware resets are only necessary in the rare case that the earbuds lock up
and are unresponsive.
L R
R
L R
Flashing red and blue lights
L R
Press again to power on
Flashing red and blue lights
Pair a New Device
Turn Bluetooth OFF on your phone/device. The earphones will
go into pairing mode. Alternatively, you can press then press
and hold either the left or right earbud to drop the current
connection and enter pairing mode.
To activate Spotify Tap™, press and hold to first
beep then let go.
The Spotify App resumes playback where you
left o. If there was no previous session or to
play other music, simply tap again and Spotify™
will play songs it thinks you’ll like.
Low Latency Mode
This mode reduces the latency (time delay)
inherent in Bluetooth connections. It’s best
for lipsync and gaming.
To turn ON/OFF Low Latency Mode, press
and hold to second beep then let go.
HYDRABUDS APP
8.
Hydrabuds App and Other Features
Voice Control
Scan the QR code below to download the Hydrabuds App for
iOS or Android. Use the app to unlock many other features, and
keep your Hydrabuds Sport up to date.
Once enabled in the Hydrabuds App, simply say “Hey Hydra”
and you will hear a confirmation tone. Use any of the following
commands to control your Hydrabuds Sport by voice command
(a second tone is heard after successful command).
Say, “Hey Hydra”, followed by:
“Play”, “Pause”, “Next”, “Volume Up”, Volume Down”, Ambient
ON”, “Ambient OFF”, “Spotify”, “Assistant”, “End Call”
If a call is coming in, you can also use these commands without
having to say “Hey Hydra” first:
“Accept”, “Reject”
Via the App you can enable hands-free voice control, customize
button actions, browse and enable advanced features and
update the firmware where necessary.
When the App notifies you, please update to the latest firmware
to ensure the best performance and user experience.
FPO
SAFETY PRECAUTIONS
9.
When using your earphones, basic safety precautions should always
be followed including:
1. READ ALL INSTRUCTIONS BEFORE USING YOUR EARPHONES AND
CHARGING CASE.
2. Do not use the product near water. Do not put on wet surfaces.
3. Only clean using a clean cloth.
4. Do not allow children to play with this product. This product
contains small pieces that can be a choking hazard. Parental
supervision is advised.
5. Do not expose this product to excessive heat or fire.
6. Do not expose this product to temperatures above 100°F. Keep out
of direct sunlight.
7. Do not attempt to repair this product yourself. Contact a qualified
service center if the product is in need of service.
8. Do not drop, crush, or expose this product to excessive physical
force.
9. This product is not intended for commercial use.
10. When charging, keep all charging cables well ventilated. Do not
keep your charging cable in contact with flammable materials such as
bedding, linens or synthetic fabrics.
Maintenance and Care
-Use a soft cloth or paper towel to clean your earphones. Never use
any harsh chemicals or detergents for cleaning. Make sure your
earphones are dry before charging.
-When your earphones are not in use, they should be stored in a
cool, dry place.
-Never tug or yank on a cable while it is connected to your charging
case. Connect and disconnect cables as carefully as possible.
-Never expose your earphones to high temperatures, extreme cold.
-Please recycle or dispose of your earphones properly based on the
laws and rules of your municipality. Contact local recycling facilities
and/or the manufacturer of your earphones for further information.
SPECIFICATIONS
10.
Sweat and Dustproof Rating: IP66
Battery Type: Lithium Polymer Battery
Bluetooth Version: V5.2
Bluetooth Range: 50 ft
Earbud Battery Capacity: 50mAh
Charging Case Battery Capacity: 500mAh
Earbud Charging Time: Approximately 1 Hour
Fast Charge Time: 10 minutes for 2 Hours Playtime
Play Time: Approximately 8 Hours*
*Case holds 3 charges giving 32 hours total
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Auriculares de Altec Lansing
Altec Lansing
Altec Lansing AHP 612 Manual de usuario
Altec Lansing
Altec Lansing MZX221 Manual de usuario
Altec Lansing
Altec Lansing BackBeat 903 Manual de usuario
Altec Lansing
Altec Lansing Earphones Manual de usuario
Altec Lansing
Altec Lansing ALCORA Manual de usuario
Altec Lansing
Altec Lansing EVOLUTION II Manual de usuario
Altec Lansing
Altec Lansing MZW300 Manual de usuario
Altec Lansing
Altec Lansing MZX201 Manual de usuario
Altec Lansing
Altec Lansing NJHP-2 Manual de usuario
Altec Lansing
Altec Lansing A13357 R01 USAS HP SAFUE INS Manual de usuario
Altec Lansing
Altec Lansing inMotion iM616 Manual de usuario
Altec Lansing
Altec Lansing Hydrabuds MZX6000 Manual de usuario
Altec Lansing
Altec Lansing MZX399 Manual de usuario
Altec Lansing
Altec Lansing AHP 612 Manual de instrucciones
Altec Lansing
Altec Lansing CHP524 Manual de usuario
Altec Lansing
Altec Lansing MZX499 Manual de usuario
Altec Lansing
Altec Lansing IN-EAR SPORT Manual de usuario
Altec Lansing
Altec Lansing inMotion iM616 Manual de usuario
Altec Lansing
Altec Lansing BackBeat Classic UHP106 Manual de usuario
Altec Lansing
Altec Lansing MZW100 Manual de usuario
