AllSee TL S1 Series Manual de usuario
1
Warning! Important Safety Instructions
Please take a moment to carefully read and understand the following safety instructions before using your video wall screen:
Ventilation:
The slots and openings on the back or bottom of the screen is designed to provide necessary ventilation. To ensure the
reliable operation of the device and prevent overheating, it is crucial that these slots and openings are never blocked or
covered.
Avoid placing the screen in confined spaces like bookcases or built-in cabinets, unless proper ventilation is available.
Keep the screen away from radiators and heat registers
Water and Moisture:
Do not place vessels (such as vases) containing water on the screen, as this can result in fire or electric shock.
Avoid exposing the screen to rain or placing it near water sources like bathtubs, washbowls, kitchen sinks, laundry tubs,
wet basements, or swimming pools. In case of accidental exposure to water, immediately unplug the device and contact
an authorized dealer.
Electrical Safety:
Avoid overloading wall outlets, extension cords, or adapters beyond their capacity, as this can lead to fire or electric shock.
Ensure that power-supply cords are positioned in a way that prevents them from being walked on or pinched. Pay attention
to cords at the plug end, wall outlets, and where they exit the device.
During lightning storms or when leaving the screen unused for extended periods, unplug it from the wall outlet and
disconnect the antenna or cable system to prevent damage from lightning or power line surges.
Never touch the inside of the screen, as it may result in electric shock. Only qualified technicians should open the device.
Always firmly plug in the power cord and pull the plug, not the cord itself, when disconnecting from the wall outlet. Avoid
touching the power cord with wet hands.
If the screen does not operate normally, emits unusual sounds or smells, immediately unplug it and contact an authorized
dealer or service center.
Do not operate within 2 minutes after power off since instantons discharge is present.
2
Installation Considerations:
For information on installing the screen in environments with heavydust, extreme temperatures, high humidity, or chemical
substances, please contact customer service. Failure to do so may cause serious damage to the screen.
Use only properly grounded plugs and wall outlets to ensure safety and prevent electric shock or equipment damage (Class
I Equipment only).
When turning off the screen completely, disconnect it from the wall outlet. Ensure easy access to the wall outlet and power
plug for quick unplugging if needed.
Do not knock, crush, and scratch the LCD screen.
Handle with care and hold the handle whilst moving the LCD screen to avoid falling or impact.
Avoid dropping or striking the product. In case of damage, disconnect the power cord and contact customer service.
Cleaning and Maintenance:
Before cleaning, unplug the power cord from the wall outlet. Use a soft, dry cloth to wipe the product. Do not use chemicals
like wax, benzene, alcohol, thinners, insecticides, air fresheners, lubricants, or detergents, as they can damage the panel's
appearance or erase printing on the product.
Prevent exposure of the screen to dripping or splashing liquids.
Keep the display away from heat sources and place it in a stable, well-ventilated location.
Handle the product with care, as it contains glass.
The holes or openings on the display are designed for ventilation. Do not cover or block them with any objects.
Remove any protective covering from the screen before using the display.
Power supply must be shut off before cleaning. Use a soft, lint-free cloth for screen wiping. If needed, you may use a glass
cleaner, but avoid spraying it directly onto the display surface. Refer to Section 7.10 for more details.
Do not attempt to repair the product yourself, as improper disassembly may void the warranty and pose potential dangers.
If you encounter a problem that cannot be resolved using the provided troubleshooting guidelines, please contact your
supplier.
Attention:
For displays intended for installation in windows, it is crucial to mount the panel surface a minimum of 100mm away from
the inside of the window. However, we strongly recommend maintaining a distance of 200mm to ensure adequate air
circulation between the display and the window. Failure to comply with these guidelines may result in failure, which will
be considered user damage.
3
Table of Contents
1. Introduction.................................................................................... 4
1.1 Safety Precautions:......................................................................................................4
1.2 Box Contents:................................................................................................................8
2. Installation Guide ............................................................................. 9
3. Remote Control...............................................................................10
3.1 Handset........................................................................................................................10
3.2 Menu Operation..........................................................................................................11
3.3 Inputs............................................................................................................................15
4. Matrix Logic...................................................................................16
4.1 Matrix Logic illustration ................................................................................................16
5. Configuring the built Matrix Video wall:.................................................17
6. F.A.Qs and Troubleshooting Guide........................................................18
6.1 How should I maintain and clean my screen? .......................................................19
7. Other Information ...........................................................................20
Decreasing power consumption...............................................................................................20
Disposal ........................................................................................................................................20
Warnings.......................................................................................................................................20
4
1. Introduction
We congratulate you on your recent purchase of our product. To ensure a satisfactory user experience, we kindly request that
you carefully read and follow all instructions provided in the manual before using the product for the first time.
It is important to note that the product should not be exposed to liquids in the form of dripping or splashing. Additionally,
please refrain from placing any objects filled with liquids, such as vases, on the product.
For your convenience, various operations can be performed using the remote control.
Attention:
Avoid changing any default settings unless it is necessary to do so.
During both installation and use, please keep the product at a safe distance from water sources.
By adhering to these guidelines, you can ensure the optimal performance and longevity of your product. If you have any
further questions, please refer to the manual or contact our customer support team for assistance.
1.1 Safety Precautions:
5
6
7
8
1.2 Box Contents:
IMPORTANT: Please retain your screen’s packaging for the duration of your warranty.
9
2.Installation Guide
Tabla de contenidos
Otros manuales de Monitor de AllSee
