Allied Vision Technologies GigE Cameras Manual de usuario

Installation Manual
GigE Vision Cameras
V1.2.0
20 March 2015
Allied Vision Technologies GmbH
Taschenweg 2a
D-07646 Stadtroda, Germany
Allied Vision GigE Cameras

AVT GigE Cameras Installation Manual V1.2.0
2
Legal notice
Trademarks
Microsoft, Windows, and Windows 7 are either registered trademarks or trade-
marks of Microsoft Corporation in the United States and/or other countries.
Unless stated otherwise, all trademarks appearing in this document of Allied
Vision Technologies are brands protected by law.
Warranty
The information provided by Allied Vision Technologies is supplied without any
guarantees or warranty whatsoever, be it specific or implicit. Also, excluded are
all implicit warranties concerning the negotiability, the suitability for specific
applications or the non-breaking of laws and patents. Even if we assume that
the information supplied to us is accurate, errors and inaccuracy may still occur.
Copyright
All texts, pictures and graphics are protected by copyright and other laws pro-
tecting intellectual property. It is not permitted to copy or modify them for
trade use or transfer, nor may they be used on websites.
Allied Vision Technologies GmbH 03/2015
All rights reserved.
Managing Director: Mr. Frank Grube
Tax ID: DE 184383113
Headquarters:
Taschenweg 2a
D-07646 Stadtroda, Germany
Tel: +49 (0)36428 6770
Fax: +49 (0)36428 677-28
e-mail: [email protected]

AVT GigE Cameras Installation Manual V1.1.0
3
Contents
Contacting Allied Vision .................................................................................. 5
Introduction ............................................................................................................ 6
Document history............................................................................................................ 6
Manual conventions......................................................................................................... 7
Styles ....................................................................................................................... 7
Symbols.................................................................................................................... 7
Additional information..................................................................................................... 8
Allied Vision accessories............................................................................................... 8
Allied Vision software .................................................................................................. 8
Safety instructions ............................................................................................10
General safety instructions.............................................................................................. 10
Sensor safety instructions............................................................................................... 11
Changing filters safety instructions................................................................................... 11
Safety instructions for board level cameras (only Manta and Prosilica GB) ................................ 12
Getting started.....................................................................................................14
GigE Vision camera.................................................................................................... 14
Optics..................................................................................................................... 14
GigE Vision software .................................................................................................. 15
Overview of installation.................................................................................................. 15
Installing hardware............................................................................................16
Installing Gigabit Ethernet network card............................................................................ 16
Configuring Ethernet adapter .......................................................................................... 17
Installing Ethernet adapter driver ................................................................................ 17
Modifying Ethernet adapter IP address .......................................................................... 17
Optimizing Ethernet adapter ....................................................................................... 19
Installing camera software...........................................................................22
Overview of software installation...................................................................................... 22
Downloading camera drivers............................................................................................ 22
Installing VIMBA Viewer ................................................................................................. 22
Installing GigE Sample Viewer.......................................................................................... 24
Starting the camera ..........................................................................................25
Power up ..................................................................................................................... 25
Connect to host application............................................................................................. 25
Using Allied Vision viewer applications ................................................26
Using VIMBA Viewer....................................................................................................... 26
Launching application ............................................................................................... 26

AVT GigE Cameras Installation Manual V1.1.0
4
Opening live view: Viewer toolbar................................................................................. 27
Adjusting camera controls: Controller window ................................................................ 28
Camera information: Information window ...................................................................... 28
Live histogram ......................................................................................................... 29
Using GigE Sample Viewer ............................................................................................... 30
Launching application ............................................................................................... 30
Opening live view...................................................................................................... 30
Adjusting camera controls .......................................................................................... 31
Live histogram ......................................................................................................... 31
Camera information................................................................................................... 31
Event channel .......................................................................................................... 32
RS232 serial interface................................................................................................ 33
Seek camera ............................................................................................................ 33
Exporting camera settings .......................................................................................... 34
Modifying camera IP address ....................................................................35
For VIMBA users ............................................................................................................ 35
For PvAPI users ............................................................................................................. 36
Using multiple cameras..................................................................................38
Single Ethernet port .................................................................................................. 39
Multiple Ethernet ports .............................................................................................. 40
Implementing link aggregation ..................................................................42
When is LAG needed? ..................................................................................................... 42
Configuring Link Aggregation .......................................................................................... 43
Multicasting configuration............................................................................46
Troubleshooting ..................................................................................................47
Is the camera getting power? ...................................................................................... 47
Is the camera powered, but not detected in viewer? ......................................................... 47
Is the camera listed in Viewer but can't acquire images? ................................................... 49
How to minimize/eliminate dropped packets? ................................................................ 50
Troubleshooting for Bigeye G cameras only (IOD mode) .................................................... 51
Additional references ......................................................................................52
Index...........................................................................................................................53

AVT GigE Cameras Installation Manual V1.1.0
5
Contacting Allied Vision
Contacting Allied Vision
Info
•Technical information:
http://www.alliedvision.com
•Support:
support@alliedvision.com
Allied Vision Technologies GmbH (Headquarters)
Taschenweg 2a
07646 Stadtroda, Germany
Tel.: +49 36428-677-0
Fax: +49 36428-677-28
e-mail: info@alliedvision.com
Allied Vision Technologies Canada Inc.
101-3750 North Fraser Way
Burnaby, BC, V5J 5E9, Canada
Tel.: +1 604-875-8855
Fax: +1 604-875-8856
e-mail: info@alliedvision.com
Allied Vision Technologies Inc.
38 Washington Street
Newburyport, MA 01950, USA
Toll Free number +1 877-USA-1394
Tel.: +1 978-225-2030
Fax: +1 978-225-2029
e-mail: info@alliedvision.com
Allied Vision Technologies Asia Pte. Ltd.
82 Playfair Road
#07-02 D’Lithium
Singapore 368001
Tel.: +65 6634-9027
Fax: +65 6634-9029
e-mail: info@alliedvision.com
Allied Vision Technologies (Shanghai) Co., Ltd.
2-2109 Hongwell International Plaza
1602# ZhongShanXi Road
Shanghai 200235, China
Tel.: +86 (21) 64861133
Fax: +86 (21) 54233670
e-mail: info@alliedvision.com

AVT GigE Cameras Installation Manual V1.1.0
6
Introduction
Introduction
This GigE Installation Manual provides instructions for first time use of Allied
Vision GigE cameras. Powering up the camera, installing Allied Vision drivers
and related software, and enabling users to get the camera up and running are
the focus of this document.
For information on camera dimensions, feature overview, I/O definition, trigger
timing waveforms, frame rate performance, and camera cleaning instructions
please refer to the Allied Vision Technical Manuals unique for each camera
family.
For detailed information on camera features and controls specific to the Allied
Vision GigE cameras refer to the GigE Camera and Driver Attributes and GigE
Features Reference documents.
Document history
www
Allied Vision product literature:
http://www.alliedvision.com/en/support/technical-
documentation
Version Date Remarks
V1.0.0 2013-Jul-04 New Manual – RELEASE Status
V1.0.1 2013-Oct-02 • Added information on how to minimize/eliminate dropped packets on
page 50
• Removed camera cleaning section from the manual
• Updated links for PvAPI SDK and Gigabit Ethernet cameras home page
throughout the manual
V1.1.0 2014-Jul-22 • Added Goldeye G
• Updated Index
V1.2.0 2015-Mar-20 • Updated Allied Vision logo
• Replaced old links with new Allied Vision website links
• Changed file name from ‘GigE Camera and Driver Features’ to ‘GigE Fea-
tures Reference’
Table 1: Document history

AVT GigE Cameras Installation Manual V1.1.0
7
Introduction
Manual conventions
To give this manual an easily understood layout and to emphasize important
information, the following typographical styles and symbols are used:
Styles
Symbols
Style Function Example
Bold Programs, inputs, or
highlighting important
information
bold
Courier Code listings etc. Input
Upper case Register REGISTER
Italics Modes, fields Mode
Parentheses and/or blue Links (Link)
Table 2: Styles
Note
This symbol highlights important information.
Caution
This symbol highlights important instructions.
You have to follow these instructions to avoid
malfunctions.
www
This symbol highlights URLs for further information.
The URL itself is shown in blue.
Example:
http://www.alliedvision.com

AVT GigE Cameras Installation Manual V1.1.0
8
Introduction
Additional information
This section provides information on accessories and available software for
Allied Vision GigE cameras.
Allied Vision accessories
Allied Vision software
All software packages provided by Allied Vision are free of charge and contain
the following components:
•Drivers
• Software Development Kit (SDK) for camera control and image acquisition
• Examples based on the provided APIs of the SDK
• Documentation and release notes
• Viewer application to operate/configure the cameras
Note
Allied Vision offers a wide range of accessories for the use of
Allied Vision GigE cameras and the easy integration in already
existing applications.
•Gigabit Ethernet accessories including standard GigE
components as well as PoE capable GigE components.
•Lenses for corresponding sensor sizes and resolutions.
(Contact Allied Vision Support for further information.)
www
Accessories:
Please contact Allied Vision sales representative or your local
Allied Vision dealer for information on accessories:
http://www.alliedvision.com/en/about-us/where-we-
are.html
For more information on third-party hardware components
tested with Allied Vision GigE cameras, read:
Application Note: Hardware Selection for Allied Vision GigE
Cameras:
http://www.alliedvision.com/fileadmin/content/documents/
products/cameras/various/appnote/
Hardware_Selection_for_Allied_Vision_GigE_Cameras.pdf
www
All software packages (including documentation and release
notes) provided by Allied Vision can be downloaded at:
http://www.alliedvision.com/en/support/software-
downloads

AVT GigE Cameras Installation Manual V1.1.0
9
Introduction
Third-party software
In addition to the software provided by Allied Vision, there are numerous GigE
Vision Standard compliant third-party software options available. In general,
third-party software provides increased functionality such as image processing
and video recording.
Allied Vision’s Vimba SDK is based on the GenICam standard. GenICam-based
third-party software automatically connects with Vimba's transport layers.
Additionally, Vimba includes the Cognex Adapter for VisionPro.

AVT GigE Cameras Installation Manual V1.1.0
10
Safety instructions
Safety instructions
This chapter describes safety instructions/cautions valid for Allied Vision GigE
cameras and special safety instructions/cautions depending on the camera
model used.
General safety instructions
Note
• There are no switches or parts inside the camera that
require adjustment. The guarantee becomes void upon
opening the camera casing.
• If the product is disassembled, reworked or repaired by
anyone other than a recommended service person, Allied
Vision or its suppliers are not responsible for the
subsequent performance or quality of the camera.
•Thecameradoesnot generate dangerous voltages inter-
nally.
Note
IR cut filters for visible light cameras:
All color models are equipped with an optical filter to elimi-
nate the influence of infrared light hitting the sensor. Please
be advised that, as a side effect, this filter reduces sensitivity
in the visible spectrum. See camera technical manual for the
location of IR cut filter.
Tabla de contenidos
Otros manuales de Cámara IP de Allied Vision Technologies

Allied Vision Technologies
Allied Vision Technologies Prosilica GE1900 Manual de usuario

Allied Vision Technologies
Allied Vision Technologies Pearleye P-007 LWIR Manual de usuario

Allied Vision Technologies
Allied Vision Technologies AVT GigEBigeye Manual de usuario

Allied Vision Technologies
Allied Vision Technologies Goldeye P-008 SWIR Manual de usuario

Allied Vision Technologies
Allied Vision Technologies Prosilica GX GX3300 Manual de usuario

Allied Vision Technologies
Allied Vision Technologies AVT Stingray Manual de usuario

















