Allflex NX Series Manual de usuario

NX Series Reader User Guide

NX-M00C Master Box- No RM4 with connectors.

NX-M01C Master Box- 1 X RM4 with connectors.

NX-M02C Master Box- 2 X RM4 with connectors.

NX-M01CA Master Box- 1 X RM4 with connectors with Antenna connectors

NX-M02CA Master Box- 2 X RM4 with connectors with Antenna connectors

NX-R01 Reader Box- 1 X RM4 without connectors

NX-R02 Reader Box- 2 X RM4 without connectors

NX-R01C Reader Box- 1 X RM4 with Power and R-Net connectors

NX-R02C Reader Box- 2 X RM4 with Power and R-Net connectors

NX-R01CA Reader Box- 1 X RM4 with Power, R-Net and Antenna connectors

NX-R02CA Reader Box- 2 X RM4 with Power, R-Net and Antenna connectors

Version 1.00/Draft 02/12/2019

IMPORTANT!

This User Guide must be read in conjunction with Reader, prior to use.

Allflex NX Series Operational Manual

Page 2of 14

TABLE OF CONTENTS

Regularity Notices and Conformity .....................................................................................................................................................3

Antenna Warning..................................................................................................................................................................................4

Product Safety Notices ..........................................................................................................................................................................4

Important...............................................................................................................................................................................................4

1.0 The NX Series............................................................................................................................................................................5

2.0 Preparation for Use...................................................................................................................................................................7

3.0 Care and Maintenance..............................................................................................................................................................7

4.0 Connections ...............................................................................................................................................................................8

5.0 Power..........................................................................................................................................................................................9

6.0 Connection interface.................................................................................................................................................................9

6.1 Bluetooth..............................................................................................................................................................................11

6.2 Wi-Fi....................................................................................................................................................................................11

7.0 RM4/Sync Module Diagnostics .............................................................................................................................................12

7.1 Locating RM4s.....................................................................................................................................................................12

7.2 Opening RM4/Sync Module settings...................................................................................................................................12

7.3 RM4 Tune and Phase...........................................................................................................................................................12

7.4 RM4 update page.................................................................................................................................................................12

7.5 Real time diagnostics...........................................................................................................................................................12

8.0 Tag Manager...........................................................................................................................................................................13

9.0 Tag Read Actions....................................................................................................................................................................13

10.0 Tag Filters................................................................................................................................................................................13

11.0 Alerts........................................................................................................................................................................................13

12.0 Storing Tags.............................................................................................................................................................................13

13.0 Sending Tags............................................................................................................................................................................13

14.0 NX Series Reader Specifiactions............................................................................................................................................14

Allflex NX Series Operational Manual

Page 3of 14

REGULARITY NOTICES AND CONFORMITY

Australia and New Zealand RMA

This device has been tested and meets the Electromagnetic Compatibility requirements for CISPR 22 and

Radio testing AS/AZS 4268

USA – FCC

Information to the user (FCC Part 15.105)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encourage to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

Consult the dealer or an experienced radio/TV technician for help

Modification warning (FCC Part 15.21)

Warning: Any changes or modifications not expressively approved by Allflex could void the user's authority

to operate this equipment.

IC Canada

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and

Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two

conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause undesired operation

of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,

Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes :

1. L’appareil ne doit pas produire de brouillage;

2. L’appareil doit accepter tout brouillageradioélectrique subi,même si le brouillage est susceptible d’en

compromettre le fonctionnement.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Allflex NX Series Operational Manual

Page 4of 14

ANTENNA WARNING

This device has been designed to operate with the antennas listed below. The NX Series Readers are only

approved with the detachable antennas below. In accordance with RSS-GEN Issue 2 June 2007 Section 7.1.4

and FCC Part 15.21, antennas not included in this list are strictly prohibited for use with this device.

Allflex Part Number

Description

NX-AW30

Antenna Wand 30cm

NX-AW50

Antenna Wand 50cm

NX-AW100

Antenna Wand 100cm

NX-AW1500

Antenna Wand 150cm

NX-AW2000

Antenna Wand 200cm

NX-AW2500

Antenna Wand 250cm

NX-AW3000

Antenna Wand 300cm

NX-AP4030

Antenna Panel 40x 30cm

NX-AP6040

Antenna Panel 60x 40cm

NX-AP9045

Antenna Panel 90x 45cm

NX-AP12060

Antenna Panel 120x 60cm

NX-ANB805

Antenna Neck bar 80cm x 5cm

PRODUCT SAFETY NOTICES

The system should not be used in weather conditions where lightning strike may be possible.

The data ports are treated as TNV-1. The device (PC or other) to be connected to this unit should comply with

the corresponding requirements for TNV-1 circuits as per AS/NZS 60950.1”

This device meets Electromagnetic Radiation Human Exposure Standard 2003 for EME -Meets

Category A under the Compliance Labelling Notice 2014

IMPORTANT

Must be read prior to using system

The following instructions must be wholly adhered to or permanent damage to the antenna/reader and/or

permanent data loss can occur. Non-conformance to the handling and operating instructions will immediately

void all warranties for the antenna/reader and software.

1. Have only one system at a time switched on unless Master/Slaved.

2. Do not hose or submerge antenna/reader in water.

3. Use only a very lightly damp cloth to clean antenna/reader.

4. Do not use chemicals to clean antenna/reader.

5. Do not drop reader boxes as electronics are contained within.

6. All boxes with seals are to be kept sealed.

7. Do not remove any VOID stickers from readers.

8. Do not drill holes in antenna.

9. Allflex Conditions of Sale apply.

Allflex NX Series Operational Manual

Page 5of 14

1.0 THE NX SERIES

The NX Reader series is available in different configurations

NX-R01 NX-R02 NX-M

Model

Description

NX-R01

Reader Box – 1x RFM. No connectors.

LED indicators for power, read, exciter and high noise.

NX-R02

Reader Box – 2x RFM. No connectors.

LED indicators for power, read, exciter and high noise.

NX-R01C

Reader Box – 1x RFM. Connectors for power and Rnet.

LED indicators for power, read, exciter and high noise.

Includes 10m power cable and 6m serial data cable.

NX-R02C

Reader Box – 2x RFM. Connectors for power and Rnet.

LED indicators for power, read, exciter and high noise.

Includes 10m power cable and 6m serial data cable.

NX-R01CA

Reader Box – 1x RFM. Connectors for power, Rnet and antenna.

LED indicators for power, read, exciter and high noise.

Includes 10m power cable and 6m serial data cable.

NX-R02CA

Reader Box – 2x RFM. Connectors for power, Rnet and antenna.

LED indicators for power, read, exciter and high noise.

Includes 10m power cable and 6m serial data cable.

NX-M00C

Master Box – No RFM. Connectors for power and Rnet.

High resolution touch screen LCD.

Includes 10m power cable, 6m serial data cable, USB cable and slide on bracket.

NX-M01C

Master Box – 1x RFM. Connectors for power and Rnet.

High resolution touch screen LCD.

Includes 10m power cable, 6m serial data cable, USB cable and slide on bracket.

NX-M02C

Master Box – 2x RFM. Connectors for power and Rnet.

High resolution touch screen LCD.

Includes 10m power cable, 6m serial data cable, USB cable and slide on bracket.

NX-M01CA

Master Box – 1x RFM. Connectors for power, Rnet and antenna.

High resolution touch screen LCD.

Includes 10m power cable, 6m serial data cable and USB cable.

NX-M02CA

Master Box – 1x RFM. Connectors for power, Rnet and antenna.

High resolution touch screen LCD.

Includes 10m power cable, 6m serial data cable and USB cable.

Allflex NX Series Operational Manual

Page 6of 14

The NX Antenna series is available in different configurations

NX-AP12060 NX-AP9045 NX-AP6040 NX-AP4030

NX-AW50

Model

Description

NX-AW30

Antenna Wand 30cm

NX-AW50

Antenna Wand 50cm

NX-AW100

Antenna Wand 100cm

NX-AW1500

Antenna Wand 150cm

NX-AW2000

Antenna Wand 200cm

NX-AW2500

Antenna Wand 250cm

NX-AW3000

Antenna Wand 300cm

NX-AP4030

Antenna Panel 40x 30cm

NX-AP6040

Antenna Panel 60x 40cm

NX-AP9045

Antenna Panel 90x 45cm

NX-AP12060

Antenna Panel 120x 60cm

NX-ANB805

Antenna Neck bar 80cm x 5cm

Allflex NX Series Operational Manual

Page 7of 14

2.0 PREPARATION FOR USE

When you have mounted your Allflex Reader, and you are ready to use it, please ensure the following steps

are closely followed:

When inserting or attachinga new electronic RFID device into or on an animal, keep all other electronic RFID

devices a minimum of 3 meters away from the Allflex Reader. This will ensure you only read the device you

are inserting or attaching.

Keep computers a minimum of 3 meters away from the Allflex Reader.

Securely fasten the computer lead into your scale indicator or computer – screw the connectors into place.

Some magnetic fields will affect reading, such as some computers, computer monitors, electric motors and

generators. This may affect your read range and therefore your reader is being interfered with.

3.0 CARE AND MAINTENANCE

Keep all spare electronic RFID devices away from the Reader.

Protect computer and power leads from animals if the system is left in the yards.

Treat the system with care; Allflex has built this system for the cattle yards, but it is an electronic unit and

must be treated accordingly.

Keep all reader connectors clean and screw covers on fittings when not in use.

MOST IMPORTANT: Allflex’ customers are our highest priority, and if you have any queries, please feel

most welcome to contact your Allflex distributor.

Allflex NX Series Operational Manual

Page 8of 14

4.0 CONNECTIONS

There are two type of reader connection configurations, NX-M and NX-R.

1. NX-M Master Reader shown below as a NX-M01CA

2. NX-R Slave Reader shown as a NX-R01CA

Note: There are several variants of the NX-M and NX-R which have different connector

configurations.

NX-M01CA

USB Stick USB PC I/O Serial R-NET 12vdc Power Antenna

•USB Stick – Is used for downloading tags from reader and doing software updates.

•USB PC - Is a USB connection to a PC. Can be used to communicate with Tag Manager.

•I/O - Input and Output. Use for controlling external devices. Refer later in manual.

•Serial - Has 2 x RS-232 communication ports.

•R-Net – Is used to connect other slave readers.

•12vdc Power - Is the supply to the reader. Can be 12vdc -14vdc.

•Antenna – Connection to Antenna.

NX-R01CA

R-Net In R-NET Out 12vdc Power Antenna

•R-Net In – Is used to connect to the Master Reader NX-M.

•R-Net – Is used to connect other slave readers.

•12vdc Power - Is the supply to the reader. Can be 12vdc -14vdc.

•Antenna – Connection to Antenna.

Allflex NX Series Operational Manual

Page 9of 14

5.0 POWER

Power requirement. Use the 12vdc power cable supplied and connect to a 12vdc power source.

An external 12-volt battery can be used, or a regulated linear power supply. DO NOT USE A SWITCH

MODE POWER SUPPLY as some switch mode power supplies can interfere with the performance of the

system. Voltage range is 12vdc to 14vdc.

The power supply must be approved for use in your country and meet all your countries emission requirements

Only use high quality regulated linear power supplies or solar panels. Please contact Allflex with any queries,

you may have. Some switch mode power supplies are NOT suitable and must not be used.

6.0 CONNECTION INTERFACE

The NX-M supports multiple connection methods to external devices. These include; Bluetooth, WiFi, Serial

and USB. Each connection uses a common connection interface.

See the table below for a full list of commands included in the interface. Each command should be entered

followed by a character return.

Commands

About

get software version

rhv

get hardware revision

rut

get unit type

rid

get unit name

rkv

get kernel version

help

list all command information

help 'cmd'

get information about a command

fla

list all files

fi 'file'

file information

download all files

s 'file'

download a file

erase all tag files

clear current session

c 'file'

erase a file

Same as s but with START/END

sae

Same as sa but with START/END

sla

list all settings

st 'id'

get current value of a setting

ss 'id' 'value'

change the value of a setting

pow

get power information

rar

exit and restart NX-M software

rbt

power off and back on

rpd

power off

load_defaults

Loads factory settings

Allflex NX Series Operational Manual

Page 10 of 14

list all files

download all files

G 'file'

download a file

time

Gets the systems current time

time_set

Set the systems current time using the following

format:dd-MM-yyyy hh:mm:ss

dfl

list all deleted files

dfli

Deleted files info list

dfg 'file'

Download a deleted file

dfga

Download all deleted files

dfr 'file'

Restore a deleted file

dfra

Restore all deleted files

factory_reset

Factory Reset

relay_set '1,2,3,4(relay number)' '1(on) or 0(off)'

Turn relays ON/OFF

input_read '1 or 2(input number)'

Reads the analog input pins

write_session

Start a new empty session

write_session 'name'

Start a new empty session with a given name

write_header Field1,Field2,Field...>

Write a header to the current session. Add a $ char at the

start of a field name to make it an numeric field eg.

$Weight,$Height

write_tag CCode,TagID,Timestamp,Field1,Field...

Writes a tag to the current session.

Timestamp format: dd-MM-yyyy hh:mm:ss

Leave empty to use default current time

scd

send current draft

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Lector de libros electrónicos de otras marcas

Denver

Denver EBO-500 Manual de usuario

Orbit Research

Orbit Research Reader 20 Manual de usuario

Amazon

Amazon Kindle Kindle 1 Manual de usuario

Franklin

Franklin DFC-3015 Manual de usuario

IEI Technology

IEI Technology AFL2-EM-RFID-KIT Manual de usuario

Pocketbook

Pocketbook РВ 903 Manual de usuario

Sony

Sony Reader PRS-T1 Manual de usuario

Sony

Sony 3803775 Manual de usuario

Polaroid

Polaroid PER70Z Manual de usuario

Kobo

Kobo GLO HD Manual de usuario

Onyx International

Onyx International SMART READING Series Manual de usuario

Air Techniques

Air Techniques ScanX ULR01.1A1 Manual de usuario

Aluratek

Aluratek AEBK01FS Manual de operación y mantenimiento

Cocoon

Cocoon BK7021 Manual de usuario

Yarvik

Yarvik EBR070 GoBook Manual de usuario

Obreey

Obreey Pocketbook 360 Plus Manual de usuario

Franklin

Franklin BOOKMAN NIV-440 Manual de usuario

Icarus

Icarus Sense E651SR Manual de usuario