allen MPS9910 Guía
SAFETY & OPERATIONS
MANUAL
Manual Part #: 075770 | Revision: -
Language: English | Original Instructions
POWER SPRAYERS
MPS9910
This manual, or a copy of it, must be kept with the machine at all times.
There is a manual storage container located on the machine for your convenience.
SAFETY & OPERATIONS MANUAL
This manual covers the products listed below:
Part No. Description
073600 SPRAYER, MPS9910
POWER SPRAYER
Copyright © 2022 Allen Engineering Corporation
All rights reserved
All information, specifications, and illustrations in this manual are subject to change without notice and
are based on the latest information at the time of publication. No part of this manual may be repro-
duced or transmitted in any form or by any means, electronics or mechanical, for any purpose, without
the express written permission of Allen Engineering Corporation (AEC). AEC assumes no responsibility
or liability for any errors or inaccuracies that may appear in this manual.
Allen® Products are covered under one or more of the following patent numbers:
U.S. Design Patents: 344,736; 400,542; 400,544; 402,998; 402,999; 403,332; 404,041; 404,042;
410,931; 413,127; 416,564; 465,897; 466,909; 474,203.
U.S. Utility Patents: 5,108,220; 5,238,323; 5,328,295; 5,352,063; 5,405,216; 5,476,342; 5,480,257;
5,480,258; 5,533,831; 5,562,361; 5,567,075; 5,613,801; 5,658,089; 5,685,667; 5,803,658;
5,816,739; 5,816,740; 5,890,833; 5,934,823; 5,967,696; 5,988,938; 5,988,939; 6,019,433;
6,019,545; 6,048,130; 6,053,660; 6,089,786; 6,106,193; 6,857,815; 5,288,166; 6,582,153 B1,
7,108,449; 7,114,876; 7,316,523; 7,690,864 B2
Canadian Patents: 2,039,893.
With other Patents Pending.
Printed in U.S.A.
Table of Contents
075770Page 4
General
Information
General Information .........................................................................................4
Limited Warranty.....................................................................................................................6
Information Contained ............................................................................................................7
In This Manual.........................................................................................................................7
Dealer Information...................................................................................................................8
Ordering Parts.........................................................................................................................9
Model Number - Serial Number Codes ....................................................................................10
UnitIdentication ....................................................................................................................11
TechnicalSpecications ..........................................................................................................12
MachineDimensionSpecications ..........................................................................................13
EngineSpecications ..............................................................................................................14
1 SAFETY..............................................................................................................15
State / Federal Warning Regulations ........................................................................................16
General Safety Precautions......................................................................................................17
Spark Arrestor Notice ..............................................................................................................18
General Safety.........................................................................................................................19
Engine Safety..........................................................................................................................22
Operating Safety .....................................................................................................................23
Transportation Safety ..............................................................................................................24
2 OPERATIONS......................................................................................................25
Introduction to MPS9910 Sprayer............................................................................................26
Sprayer Assembly....................................................................................................................27
Start-Up Procedure .................................................................................................................29
Sprayer Operation ...................................................................................................................31
3 SERVICE ............................................................................................................32
Periodic Maintenance..............................................................................................................34
Diaphragm Pump Operation and Maintenance (9910 D30) ......................................................35
Troubleshooting.......................................................................................................................36
Parts Manual...........................................................................................................................38
Revision Detail ........................................................................................................................39
Sect No. Title Page
075770 Page 5
General
Information
PAGE LEFT BLANK INTENTIONALLY
Limited Warranty
Allen Engineering Corporation (“Allen”) warrants its products to be free of defects in material or workmanship for:
TWO YEARS FROM END USER’S DATE OF PURCHASE
1. Warranty period begins on the date of purchase by the End User of the product. All warranty is based on the following limited
warranty terms and conditions, including the disclaimer of implied warranties and consequential damages.
2. Allen’s obligation and liability under this warranty is limited to repairing or replacing parts if, after Allen’s inspection, there is
determined to be a defect in material or workmanship. Allen reserves the choice to repair or replace.
3. If Allen chooses to replace the part, it will be at no cost to the customer and will be made available to the Allen Distributor,
Dealer, or Rental Center from whom the End User purchased the product.
4. Replacement or repair parts, installed in the product, are warranted only for the remainder of warranty period of the product
as though they were the original parts.
5. Allen does not warranty engines or batteries. Engine warranty claims should be made directly to an authorized factory service
center for the particular engine manufacturer. Batteries are not warranted due to unknown treatment during transport, etc,
and any battery claims should be directed to the battery manufacturer.
6. Allen’s warranty does not cover the normal maintenance of products or its components (such as engine tuneups and oil &
filter changes). The warranty also does not cover normal wear and tear items (such as belts and consumables).
7. Allen’s warranty will be void if it is determined that the defect resulted from operator abuse, failure to perform normal
maintenance on the product, modification to product, alterations or repairs made to the product without the written approval
of Allen. Allen specifically excludes from warranty any damage to any trowels resulting from an impact to the rotors.
8. Impact damage to gear boxes is not covered under the Allen warranty and is deemed customer abuse.
9. Allen will pay shop labor on warranty items at the Allen Shop Labor Rate in existence on the date of the warranty claim.
An Allen labor chart will determine the time allowed to complete a repair and will govern the shop labor hours that will be
allowed.
10. Allen will pay freight on warranty replacement parts at worldwide standard ground rates. No warranty replacement parts will
be shipped air freight at the expense of Allen. Allen only pays outbound freight charges when sending warranty replacement
parts to the customer via ground service. Allen does not pay any inbound freight. However, if Allen determines this to be a
warranted item, only then will Allen reimburse the customer for inbound freight at standard ground rates.
11. ALLEN ENGINEERING CORPORATION’S WARRANTY POLICY WILL NOT COVER THE FOLLOWING: TAXES;
A. SHOP SUPPLIES; ENVIRONMENTAL SURCHARGES; AIR FREIGHT; TRAVEL TIME; LOSS OF TIME; INCONVENIENCE; LOSS
OF RENTAL REVENUE; RENTAL COSTS OF EQUIPMENT USED TO REPLACE THE PRODUCT BEING REPAIRED;
B. LOSS OF USE OF THE PRODUCT; COMMERCIAL LOSS; OR ANY OTHER CHARGES WHATSOEVER OR ANY LIABILITIES
FOR DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE OR DELAY.
C. ALLEN ENGINEERING CORPORATION MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED. THIS LIMITED
WARRANTY IS IN LIEU OF THE WARRANTY OF MERCHANTABILITY AND FITNESS. THERE ARE NO OTHER WARRANTIES
THAT EXTEND BEYOND THE DESCRIPTION ON THIS DOCUMENT.
12. No Allen employee or representative is authorized to change this warranty in any way or grant any other warranty unless such
change is made in writing and signed by an officer of Allen Engineering Corporation.
075770Page 6
General
Information
This manual provides information and procedures to safely operate and maintain the Allen Machine.
For your own safety and protection from personal injury, carefully read, understand, and observe the
safety instructions described in this manual. Keep this manual or a copy of it with the machine at all
times.
ALWAYS operate this machine in accordance with the instructions described in this manual. A well
maintained piece of equipment will provide many years of trouble free operation.
This manual is divided into the following sections:
Complete any warranty requirements as specified by the engine manufacturer in their instructions found
inside the tool box located on top of the trailer.
The engine and pump are not manufactured by Allen Engineering Corporation, Inc, and therefore are not
covered under Allen Engineering Corporation, Inc warranty.
The engine and pump manufacturer should be contacted if you wish to purchase a parts manual or a
repair manual.
Refer to enclosed owner manuals for complete O&M instructions.
SECTION 1
SAFETY
SECTION 2
OPERATIONS
SECTION 3
SERVICE
Information Contained
In This Manual
075770 Page 7
General
Information
Dealer Name: ______________________________________________________________
Phone #: (____) - ____ - ______________________________________________________
Address: _________________________________________________________________
City: ____________________________________ State:________ Zip:_____________
Salesman: _______________________________ Mobile Phone __________________
Additional Comments: _____________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
Dealer Information
Your Dealer has Allen Engineering Corporation trained mechanics and original Allen replacement parts.
Always contact the Allen Dealer who sold you this machine for Allen Certified repairs and replacement
parts.
Place Allen Dealer information below for future reference.
075770Page 8
General
Information
Ordering Parts
ALL INFORMATION, SPECIFICATIONS, AND ILLUSTRATIONS IN THIS MANUAL
ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ARE BASED ON THE LATEST
INFORMATION AT THE TIME OF PUBLICATION.
The Parts and Decals manual contains illustrated parts lists for help in ordering replacement parts
for your machine. Follow the instructions below when ordering parts to insure prompt and accurate
delivery:
1. All orders for service parts must include the serial number for the machine. Shipment will be
delayed if this information is not available.
2. Include the correct description and part number from the PARTS & DECALS manual.
3. Specify the exact shipping instructions, including the preferred routing and complete destination
address.
4. DO NOT return parts to AEC without receiving written authorization from AEC. All authorized
returns must be shipped pre-paid.
5. When placing an order, please contact the AEC dealer nearest you.
075770 Page 9
General
Information
Model Number - Serial Number Codes
Serial Number:
The serial number found on the identification plate is a ten digit format. The model number identifies
your machine and will ensure that you receive the correct replacement parts.
9910 01 11 001
Production Sequence
Model Number
MPS 9910
MODEL
Year Manufactured
Month Manufactured
Series/Model
SERIES
Manufacturer’s Codes:
When ordering parts or requesting service information, you will always be asked to specify the model
and serial numbers of the machine. The legends below specifically defines each significant character
or group of characters of the Model Number and Serial Number codes.
075770Page 10
General
Information
Tabla de contenidos
Otros manuales de Pistola pulverizadora de pintura de allen
