Allen-Bradley 1606-BATASSY2 Manual de usuario

Reference Manual

Bulletin 1606 Switched Mode Power Supplies

Catalog Numbers: 1606-BATASSY2, 1606-XLSBAT2, 1606XLSBATBR2

•DC-UPS—Uninterruptible power supply with DC Input.

•Normalmode—Describes a condition in which the battery is charged, the input voltage is in range and the output is loaded within the

allowed limits.

• Buffer mode—Describes a condition where the input voltage is below the transfer threshold level, the unit is running on battery (buffering)

and the output is loaded within the allowed limits.

• Charging mode—Describes a condition where the battery is in the process of charging, the input voltage is in range and the output is loaded

within the allowed limits.

• Inhibit mode—Describes a condition where buffering is intentionally disabled by using the inhibit input of the DC UPS (e.g. to perform

service actions or to save battery capacity).

•Buffertime—This term is equivalent to “hold-up time.”

• T.b.d.—To be defined, value or description will follow later.

Terminology and Abbreviations

All parameters are specified at 25°C ambient unless noted otherwise.

2Rockwell Automation Publication 1606-RM040A-EN-P — April 2014

Bulletin 1606 Switched Mode Power Supplies

Battery Modules

A modular concept allows the user to meet individual

application demands and is available with two dierent

options:

You can order the module with an assembled battery or

you can choose only the bracket allowing the mounting

of individual batteries. The mounting bracket allows you

to assemble the battery just in time, thus avoiding

problems with outdated batteries due to limited shelf life.

Long life battery: 10 to12 years

Easy access to the terminals and the fuse

Description Specication Quick Reference

Battery

Maintenance free valve regulated lead acid battery

Battery voltage nom 12Vdc

Battery capacity nom 26Ah

Self-discharge typ 3%/ month at 20°C

Design life (EUROBAT) 10 to 12 years

Fuse

Blade terminal fuse nom 30A ATO

)esuflettiL030752(

Terminals and Wiring

Type Screw terminals

Solid wire nom 2.5-4mm

Stranded wire nom 2.5-4mm

American wire gauge max 12 AWG

Wire stripping length nom 7mm / 0.275”

Tightening torque nom 0.8Nm / 7lb.in

Ambient Temperature

Operation min +0°C to +40°C

Storage and transport min -20°C to +50°C

Instructions for Use and Disposal of the Battery

Place the battery module outside the cabinet or in the

coolest area when used inside the cabinet.

Use wires no smaller than 2.5mm

(or 12 AWG) and not

longer than 2x1.5m (cord length 1.5m).

Disconnect battery fuse before working on the battery

or on the DC-UPS.

For storage, installation and operation, the

requirements of the EN 50272-2 as well as other

national regulations must be observed.

Ensure sucient ventilation for the battery.

Always dispose of the batteries through a recycling

organisation. Batteries must be complementely discharged

before recycling.

Dimensions and Weight (1606-XLSBATASSY2)

Width nom 214 mm / 8.43“

Height nom 179 mm / 7.05“

Depth nom 158 mm / 6.22“

Weight max 9920g / 21.83lb

Warranty

3 Year limited warranty except battery as battery is

considered as a service part. Special conditions are part of

our general terms and condit ions. Do not store the

battery longer than 9 month without supplementary

charge or performance might change.

Catalog Numbers Certication Marks

1606-XLSBATASSY2 Battery module

1606-XLSBATBR2 Mounting kit without battery

1606-XLSBAT2 Battery replacement

Marine

Battery, terminal block,

cables, fuse and fuse

holder are UL-approved

components.

GOST R

All parameters are specified at 25°C ambient unless noted otherwise.

Rockwell Automation Publication 1606-RM040A-EN-P — April 2014 3

Bulletin 1606 Switched Mode Power Supplies

Intended Use

•This device is designed for installation in an enclosure and is intended for the general professional use such as in industrial control, office,

communication, and instrumentation equipment.

•Do not use this power supply in aircraft, trains, nuclear equipment or similar systems where malfunction may cause severe personal injury or

threaten human life.

•This device is designed for use in non-hazardous, ordinary or unclassified locations.

Installation Requirements

•This device may only be installed and put into operation by qualified personnel.

•This device does not contain serviceable parts. The tripping of an internal fuse is caused by an internal defect.

•If damage or malfunction should occur during installation or operation, immediately turn power off and send unit to the factory for inspection.

•Mount the unit on a DIN rail so that the terminals are located on the bottom of the unit.

•This device is designed for convection cooling and does not require an external fan. Do not obstruct airflow and do not cover ventilation grid

(e.g. cable conduits) by more than 30%!

•Keep the following installation clearances: 40mm on top, 20mm on the bottom, 5mm on the left and right sides are recommended when the

device is loaded permanently with more than 50% of the rated power. Increase this clearance to 15mm in case the adjacent device is a heat

source (e.g. another power supply).

SHOCK HAZARD: Do not use the power supply without proper grounding (Protective Earth). Use the terminal on the input

block for earth connection and not one of the screws on the housing.

- Turn power off before working on the device. Protect against inadvertent re-powering

- Make sure that the wiring is correct by following all local and national codes

- Do not modify or repair the unit

- Do not open the unit as high voltages are present inside

- Use caution to prevent any foreign objects from entering the housing

- Do not use in wet locations or in areas where moisture or condensation can be expected

- Do not touch during power-on, and immediately after power-off. Hot surfaces may cause burns.

WARNING: EXPLOSION HAZARDS!

Substitution of components may impair suitability for this environment. Do not disconnect the unit or operate the voltage adjustment or S/P jumper unless

power has been switched off or the area is known to be non-hazardous.

All parameters are specified at 25°C ambient unless noted otherwise.

4Rockwell Automation Publication 1606-RM039A-EN-P — April 2014

Bulletin 1606 Switched Mode Power Supplies

Physical Dimensions

Panel/Wall Mounting

The battery module can be mounted in upright or table-top position.

Fig. 1 Front view Fig. 2 Side view

Fig. 2 Hole pattern

Rockwell Automation Support

Rockwell Automation provides technical information on the Web to assist you in using its products.

At http://www.rockwellautomation.com/support, you can find technical manuals, technical and application

notes, sample code and links to software service packs, and a MySupport feature that you can customize to

make the best use of these tools. You can also visit our Knowledgebase at http://

www.rockwellautomation.com/knowledgebase for FAQs, technical information, support chat and forums,

software updates, and to sign up for product notification updates.

For an additional level of technical phone support for installation, configuration, and troubleshooting, we offer

TechConnectSM support programs. For more information, contact your local distributor or Rockwell Automation

representative, or visit http://www.rockwellautomation.com/support/.

Installation Assistance

If you experience a problem within the first 24 hours of installation, review the information that is contained in

this manual. You can contact Customer Support for initial help in getting your product up and running.

New Product Satisfaction Return

Rockwell Automation tests all of its products to help ensure that they are fully operational when shipped from

the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these

procedures.

Documentation Feedback

Your comments will help us serve your documentation needs better. If you have any suggestions on how to

improve this document, complete this form, publication RA-DU002, available at http://

literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf.

United States or Canada 1.440.646.3434

Outside United States or Canada Use the Worldwide Locator at http://www.rockwellautomation.com/rockwellautomation/support/overview.page, or contact your local

Rockwell Automation representative.

United States Contact your distributor. You must provide a Customer Support case number (call the phone number above to obtain one) to your

distributor to complete the return process.

Outside United States Please contact your local Rockwell Automation representative for the return procedure.

Publication 1606-RM040A-EN-P — April 2014

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Fuente de alimentación de Allen-Bradley

Allen-Bradley

Allen-Bradley Series B Manual de usuario

Allen-Bradley

Allen-Bradley 140G Series Manual de usuario

Allen-Bradley

Allen-Bradley 1606-XLB240E Manual de usuario

Allen-Bradley

Allen-Bradley 140G-N Manual de usuario

Allen-Bradley

Allen-Bradley 1606-XLS240F Manual de usuario

Allen-Bradley

Allen-Bradley 1606-XLE480EP-D SER B Manual de usuario

Allen-Bradley

Allen-Bradley 1606-XLB36EH Manual de usuario

Allen-Bradley

Allen-Bradley ControlLogix 1756-PA75/B Manual de usuario

Allen-Bradley

Allen-Bradley 1756-PA30XT Manual de usuario

Allen-Bradley

Allen-Bradley 1734-EP24DC Manual de usuario

Allen-Bradley

Allen-Bradley 1606-XLS960F-3 Manual de usuario

Allen-Bradley

Allen-Bradley 1606-XLE480EM Manual de usuario

Allen-Bradley

Allen-Bradley 1771-P7 Series C Manual de usuario

Allen-Bradley

Allen-Bradley Rockwell Automation 1606-XLP60EQT Manual de usuario

Allen-Bradley

Allen-Bradley 1606-XLPRED Manual de usuario

Allen-Bradley

Allen-Bradley 1771-P4S Manual de usuario

Allen-Bradley

Allen-Bradley 1492-PDE1112 Manual de servicio

Allen-Bradley

Allen-Bradley 1606-XLE480EP Manual de usuario

Allen-Bradley

Allen-Bradley 1606-XLE480FP Manual de usuario

Allen-Bradley

Allen-Bradley 1606-XLB60E Manual de usuario

Allen-Bradley

Allen-Bradley 1606-XLE480FP-D Manual de usuario

Allen-Bradley

Allen-Bradley 1771-P2 Guía de instalación y uso

Allen-Bradley

Allen-Bradley 1397 Manual de usuario

Allen-Bradley

Allen-Bradley 1609-HDK1 Manual de usuario

Manuales populares de Fuente de alimentación de otras marcas

Monacor

Monacor PS-12CCD Manual de usuario

VOLTIMA

VOLTIMA MagicBox 15 Manual de usuario

Agilent Technologies

Agilent Technologies 6032A Manual de usuario

Miller

Miller Auto Deltaweld 452 Manual de usuario

BCP

BCP PUOUBK Hoja de instrucciones

HC 2210 Manual de usuario

Puls

Puls CT5.241 Manual de usuario

OCZ

OCZ ZX1250W Manual de usuario

iseg

iseg ECH 238 Manual de usuario

Power

Power XXL A Series Manual de usuario

Agilent Technologies

Agilent Technologies 6631B Manual de usuario

Renogy

Renogy PHOENIX 300 Manual de usuario

HP 6200B Manual de servicio

Epson

Epson Stylus Scan 2500 Manual de funcionamiento

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manual de usuario

Puls

Puls MiniLine ML50.100 Manual de usuario

Puls

Puls AS-Interface SLA4.100 Manual de usuario

Kenwood

Kenwood PS-60 Manual de usuario