Alemite 9950-A Manual de usuario

Service Guide

SER 9950-A

9950-A

9951

9951-S

9951-T

Alemite Corporation

PO Box 473515, Charlotte, North Carolina 28247-3515

www.alemite.com

This document contains confidential information that is the property of Alemite Corporation

670793 and is not to be copied, used, or disclosed to others without express written permission. Revision (1-00)

Figure 1 High-Pressure Pump

Models 9950-A and 9951 Series - Model 9951-T Shown

Description

The major components of the high-pressure pump

assembly in the 9950-A and 9951 model series consist of

a(n):

• air-operated motor

• single-acting reciprocating pump tube

• cover assembly

• follower plate

• control valve, z-swivel, and hose (Model 9951 series)

• dolly ((Model 9951)

• two-wheel hand truck (Model 9951-T)

Pump Assembly

The high-pressure (50:1 ratio) pump included with the

assembly is designed to deliver a range of greases

[up to NLGI # 3] and operate directly from their original

120-pound container.

Models 9950-A and 9951 Series

Each model in the 9951 series includes a control valve,

z-swivel, and delivery hose.

Portable

Model 9951 also includes a dolly while model 9951-T

is equipped with a hand truck.

Stationary

Model 9950-A is stationary. See Figure 1.

Specifications

IMPORTANT: For detailed information on

the pump tube (including specifications and

performance data) refer to SER 9911/9950.

For information on the motor, please refer to

SER 339413.

High-Pressure Pump (Stationary and Portable)

Pump

Model

Control

Valve,

Swivel

& Hose Dolly Hand

Truck

Width x Height

(including container)

Inches Cm

9950-A 15 x 36-1/2 38.1 x 92.7

9951 20-1/4 x 39 51.4 x 99.1

9951-S 15 x 36-1/2 38.1 x 92.7

9951-T 15 x 38 38.1 x 96.5

1-800-548-1191-http://[email protected]

SER 9950-A High-Pressure Pump (Stationary and Portable)

Revision (1-00) 2 Alemite Corporation

Figure 2 High-Pressure Pump Models 9950-A and 9951 Series - Exploded View

1-800-548-1191-http://[email protected]

High-Pressure Pump (Stationary and Portable) SER 9950-A

Alemite Corporation 3 Revision (1-00)

Item

No. Part No. Description

Qty Pump Model

Notes Numeric Order

Part # (Item #)

9950-A

9951

9951-S

9951-T

1328030 Coupler, Air, 1/4 " NPTF (f) 1All 1001-66

2 328034 Connector, 1/4 " NPTF (m) 1 6320-3 (18)

3 43748 Body, Angle 1 9950 (4)

4 9950 Pump Assembly, High-Pressure 1 All See SER 9911/9950 17804 (11)

5 44734 Adapter, 1/2 " -27 x 3/8 " NPTF (m) 1 43748 (3)

6 315669 Adapter, 3/8 "NPTF (m) 1 44734 (5)

7 317875-7 Hose Assembly, Material 1 48018 (10)

8 315943 Bushing 1 B52752 (17)

9 338371 Cover Assembly 1

All

Includes items 10-13 77009 (19)

10 48018 Screw, Thumb, 1/4 " -28 x 1-1/8 " 3 77786 (13)

11 Washer, 1/4 " 3 170561 (20)

12 Washer, Lock, 1/4 " 3 172207-1 (12)

13 Capscrew, 1/4 " -20 x 1/2 " 3 315669 (6)

14 338801 Plate, Follower 1 315943 (8)

15 316315-5 Dolly Assembly 1 See SER 316315-5 316315-5 (15)

16 338958 Truck, Hand, Two-Wheel 1 317875-7 (7)

17 B52752 Z-Swivel Assembly, High-Pressure 1 See SER B52750 328030 (1)

18 6320-3 Valve Assembly, Control 1 See SER 6320-3 328034 (2)

19 Washer, Internal Tooth Lock, 1/4 " 1 338371 (9)

20 Screw, 1/4 " -20 x 5/16 " 1 338801 (14)

1001-66 Adapter, Union, 90 °, 3/8 " NPTF 1 Not Illustrated 338958 (16)

Legend:

Part numbers left blank (or in italics) are not available separately

1-800-548-1191-http://[email protected]

SER 9950-A High-Pressure Pump (Stationary and Portable)

Revision (1-00) 4 Alemite Corporation

Assembly

NOTE: Refer to Figure 2 for component

identification on all assembly procedures.

CAUTION

Select a clean environment for all assembly proce-

dures. Prevent contamination from foreign mate-

rial. Damage to components can occur.

Pump Assembly

IMPORTANT: Make sure to remove the pro-

tective cover from the inlet of Pump Assem-

bly (4).

1. Install Pump Assembly (4) into Cover (9).

2. Secure the Pump Assembly to the Cover with

Washers (11), Lock Washers (12), and Capscrews (13).

• Tighten the Capscrews securely.

IMPORTANT: Do not apply thread sealant

to the first two (2) threads of any connection.

Contamination can occur.

3. Screw Connector (2) [with thread sealant] into the

inlet of the air motor.

• Tighten the Connector securely.

NOTE: On model 9950-A, install Angle

Body (3) [with thread sealant] into the inlet

of the air motor. Make sure to orient the

component properly while tightening. Install

Connector (2) [with thread sealant] into the

Angle Body and tighten securely.

4. Attach Air Coupler (1) to the Connector.

Cover Assembly and Follower Plate

5. Place Follower Plate (14) onto the top of the product.

• With a wobbling motion, eliminate any air that may

be trapped underneath the Follower Plate. Force the

product through the hole in the center of the Plate.

Changes Since Last Printing

Changed Numeric Order List

NOTE: On model 9951-T, place the con-

tainer on Hand Truck (16). Slide each hook

onto the lip of the container.

On model 9951, secure the container to Dol-

ly (15). Refer to SER 316315-5 for details.

6. Guide the pump tube into the Follower Plate and fit the

Cover onto the container.

7. Secure the Cover to the container with Thumb

Screws (10).

8. Screw the large diameter end of Adapter (5) [with

thread sealant] into the outlet of the Pump Assembly.

• Tighten securely.

NOTE: On model 9950-A, screw Adapter

(6) [with thread sealant] into the outlet of the

Pump Assembly and tighten securely.

Control Valve and Material Hose

NOTE: The following procedures are appli-

cable to model 9951 series pumps.

9. Screw either end of Material Hose (7) into

Adapter (5).

• Tighten securely.

10. Screw the 1/2 " -27 end of Z-Swivel (17) [with thread

sealant] into the Material Hose.

• Tighten securely.

11. Screw the opposite end of the Z-Swivel [with thread

sealant] into Control Valve (18).

• Tighten securely.

12. Test/Prime the Pump assembly.

• Refer to Service Guide SER 9911/9950 for details.

Adapter for Model 9950-A

The 1001-66 Union Adapter (not illustrated) is used to

attach the lubricant connecting hose [not included] to the

system’s piping.

1-800-548-1191-http://[email protected]

Este manual sirve para los siguientes modelos

Otros manuales de Bomba de agua de Alemite

Alemite

Alemite 7730 Manual de usuario

Alemite

Alemite 7896 Series Manual de usuario

Alemite

Alemite 8324 Manual de lista de piezas

Alemite

Alemite 8700 Manual de usuario

Alemite

Alemite 8550-A1 Manual de usuario

Alemite

Alemite 8568 Series Manual de usuario

Alemite

Alemite 7818-F4 Manual de usuario

Alemite

Alemite 9911-H1 Manual de usuario

Alemite

Alemite 7795-A5 Series Manual de usuario

Alemite

Alemite 7880-C1 Manual de usuario

Alemite

Alemite 9616-A Manual de usuario

Alemite

Alemite 7785 Series Manual de usuario

Alemite

Alemite 9911-HA Manual de usuario

Alemite

Alemite 8202 Manual de instrucciones

Alemite

Alemite 9940 Manual de usuario

Alemite

Alemite 9961 series Manual de usuario

Alemite

Alemite 8430 Manual de usuario

Alemite

Alemite 8301 Instrucciones de funcionamiento

Alemite

Alemite 8702 Series Manual de usuario

Alemite

Alemite 9968 Manual de usuario

Alemite

Alemite 9916-A Manual de usuario

Alemite

Alemite 9930 Manual de usuario

Alemite

Alemite 7531-4 Instrucciones de funcionamiento

Alemite

Alemite 9911-HA1 Manual de usuario

Manuales populares de Bomba de agua de otras marcas

Neptun

Neptun NPHW 5500 Manual de usuario

Sensidyne

Sensidyne Gilian BDX-II Instrucciones de instalación y funcionamiento

Draper

Draper 47808 Manual de usuario

Trolla

Trolla 12820 Manual de usuario

Sunfab

Sunfab SVH Series Manual de usuario

WilTec

WilTec 50740 Manual de usuario

Fieldmann

Fieldmann FVC 5015 EK Manual de usuario

Everbilt

Everbilt EFSUB5-122HD Manual de usuario

Graco

Graco Husky 3300e Manual de usuario

esotec

esotec 101018 Manual de usuario

moyno

moyno 2000 CC Manual de usuario

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manual de usuario

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guía de solución de problemas

DUROMAX

DUROMAX XP WX Series Manual de usuario

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manual de usuario

Franklin Electric

Franklin Electric IPS Manual de usuario

Xylem

Xylem e-1532 Series Manual de usuario

Milton Roy

Milton Roy PRIMEROYAL Manual de usuario