ALDI AU4-PE-3A Manual de usuario
Pedometer with Speed Sensor
User Manual
Pedometer with Speed Sensor General Information
_____________________________________________________________
AFTER SALES SUPPORT service@produktservice.info Toll Free Number 1-800-493-9137
2
Dear Customer,
Thank you very much for purchasing our pedometer.
We wish you a lot of fun with it.
Imprint / Editor of the user manual
Krippl-Watches, Warenhandels GmbH, Maria-Theresia-Str. 41, A-4600 Wels, Austria
Tel. ++43/7242/52323, Email: krippl@krippl-watches.com, www.krippl-watches.com
Product description
Pedometer with Speed Sensor
MODEL NO.
AU4-PE-3A/3B
Importer
Krippl-Watches Warenhandels GmbH, Maria-Theresia-Str. 41, A-4600 Wels, Austria
PRODUCT COMPONENTS / SCOPE OF DELIVERY
1 pedometer AU4-PE-3A/B (Type: PDD-VB)
1 clip
1 x 3 V battery type CR2032, already inserted
User manual
Warranty card
TABLE OF CONTENTS
1. GENERAL INFORMATION..............................................................................3
2. SAFETY AND SERVICING..............................................................................3
Batteries..................................................................................................32.1
Operational Environment Conditions.......................................................42.2
Water Resistance....................................................................................42.3
Disposal ..................................................................................................42.4
Cleaning and Care ..................................................................................42.5
Storage....................................................................................................42.6
Notes on operating instructions...............................................................52.7
3. FUNCTION KEYS/MODES/SETTING.............................................................5
How to use the clip..................................................................................53.1
Function keys of the Pedometer..............................................................53.2
Pedometer...............................................................................................53.3
Pedometer Calibration.............................................................................63.4
Pedometer with Speed Sensor General Information
_____________________________________________________________
AFTER SALES SUPPORT service@produktservice.info Toll Free Number 1-800-493-9137
3
4. OPERATION MODES .....................................................................................8
Main Mode ..............................................................................................84.1
Exercise Mode.........................................................................................84.2
Daily Record Mode................................................................................104.3
Memory Mode .......................................................................................104.4
5. TECHNICAL DATA........................................................................................12
6. BATTERY CHANGE......................................................................................12
7. CONFORMITY............................................................................................... 13
8. TROUBLESHOOTING/FAQS........................................................................ 14
9. CONTACT DATA...........................................................................................14
1. GENERAL INFORMATION
Please read and follow this user manual carefully before using your pedometer.
Area of Application
The pedometer can be used as a training tool for measurement and display of your
moving accuracy. It has been designed for personal use and is not suitable for any
commercial purpose. The pedometer is not a medical device. Please read the
operating instructions to learn about all functions of your pedometer and ensure
flawless operation. All specified data are merely for guidance. Subject to technical
modifications.
2. SAFETY AND SERVICING
Please read the safety instructions carefully and only use the pedometer as
described in these instructions to avoid accidental injuries or damage. Retain these
instructions for future reference. These instructions should be handed over when
passed on to a new owner.
Important: Always consult a physician before starting a regular training program.
The pedometer is not a medical device, it is a training tool to measure and display
your moving accuracy.
Batteries2.1
Your pedometer runs on a 3 V CR2032 battery.
Below are some directions on the use of batteries:
•Never expose the battery to excessive heat such as sunlight, fire or the like -
increased danger of leakage!
•Never recharge the battery.
•Do not short-circuit the battery and do not take it apart – explosion hazard!
•If necessary clean the battery and unit contacts before inserting the battery.
•Flat batteries should be immediately removed from the device. There is
increased danger of leakage.
Pedometer with Speed Sensor Safety and Servicing
_____________________________________________________________
AFTER SALES SUPPORT service@produktservice.info Toll Free Number 1-800-493-9137
4
•Remove the battery when the device is not in use for a longer period of time.
•Caution! There is a risk of explosion, if the battery is not changed correctly. Only
replace the battery with one of the same or similar type.
•Keep the batteries and pedometer out of reach of children. Batteries can be
swallowed by children. Seek immediate medical attention, if this happens.
•Avoid contact with skin, eyes and mucous membrane if leakage occurs. Upon
contact with battery acid rinse the affected area with plenty of water and seek
medical help immediately.
Non-compliance with these instructions can lead to damage and under certain
circumstances to explosion of the batteries. Details on how to change the batteries
can be found under Section 6 „Battery change“.
Operational Environment Conditions2.2
The pedometer can be operated continuously at an ambient temperature of 32 °F to
104 °F. The pedometer is protected against shocks, which may occur during normal
wear on the belt. No evidence of condensation is allowed in a pedometer as this
might trigger a short circuit. The pedometer should therefore never be exposed to
extreme changes in temperature. The unit should never be placed near very strong
magnet fields (e.g. electrical welding equipment, current transformers) as this could
cause variations in the time measurement. Non-compliance with these directions can
result in malfunction or damage of the pedometer.
Water Resistance2.3
The pedometer is not water resistant. Be careful not to press the keys, when the
pedometer is wet. Water can only enter the casing through the keys and damage
the movement.
Disposal2.4
Dispose of the packaging in the proper manner. Batteries need to be properly
disposed of. For this purpose, shops selling batteries provide special containers for
environmentally-friendly disposal. Furthermore, empty batteries will be taken back at
public waste collection points. Should you wish to dispose of the article, do so in
accordance with the latest provisions. Details are available from your local authority.
Cleaning and Care2.5
Use only a soft, damp, lint-free cloth to clean the pedometer. Do not use solvents,
abrasive or gaseous cleaning materials. Ensure that all water droplets are removed
from the display. Water can cause permanent discolouration. Ensure that the
pedometer display is not exposed to glaring sunlight or ultraviolet rays.
Storage2.6
Store the pedometer in a cool and dry place. Once the battery has been removed,
the pedometer can be stored at 32 °F to 122 °F.
Pedometer with Speed Sensor Function Keys/Modes/Setting
_____________________________________________________________
AFTER SALES SUPPORT service@produktservice.info Toll Free Number 1-800-493-9137
5
Notes on operating instructions2.7
We have structured the operating instructions for this pedometer in such a way that
you can always find the information you require using the themed topics in the table
of contents.
Additionally, you can refer to the FAQ section on our online product service page for
further help with your pedometer.
http://www.produktservice.info EAN Code: 20014483
3. FUNCTION KEYS/MODES/SETTING
How to use the clip3.1 1. Attach the clip to the pedometer. For correct alignment, see the clip on the
pedometer and small arrows.
2. Attach the pedometer to your belt or waistband. If you attach it as shown,
you can read the values from above when wearing it. Or you can put the
pedometer without a clip in your pocket.
Function keys of the Pedometer3.2
We would like to advise, that the upper key in the drawing above is identified as
“SEL” in the following text, as well as the lower key is identified as “SET”.
Pedometer3.3
This pedometer is delivered in sleep mode. Please press any key for entering the
First Setting Mode.
All digits are shown shortly. Then “Unit” is displayed and “KM” is flashing. Now please
follow the below instructions.
Note: If you have set wrong data and you will restart setting, please make a total
reset by pressing the “SEL”- and the “SET”-key simultaneous for 3 seconds or you
can also remove the battery and insert it again.
Set Unit
Press SEL to toggle between KM or Mile. Press SET to confirm and
advance to SET Time. If KM is selected, the scale of the unit will be in
KM, KG, Meter. If Mile is selected, the scale of the unit will be in Mile,
LB, Inch.
SEL
MODE
SET
Pedometer with Speed Sensor Function Keys/Modes/Setting
_____________________________________________________________
AFTER SALES SUPPORT service@produktservice.info Toll Free Number 1-800-493-9137
6
Set Time
Press SEL to toggle 12 or 24 hr Format, press SET to
confirm and advance to SET hours.
Press SEL to advance to desired hours, press SET to
confirm and advance to set minutes.
Press SEL to advance to desired minutes, press SET to
confirm and advance to set weight.
Set Weight and Height
The unit default of weight is 50KG or 110LB.
Press SEL to advance to desired weight, press SET to
confirm and advance to set height.
The unit default of height is 150cm or 59inch.
Press SEL to advance to desirable height, press SET to
confirm and advance to Calibration Mode.
Note: It is necessary to enter the correct weight and height to receive a meaningful
value of calorie consumption and fat burning.
Note: By calibrating the pedometer it calculates your step length for running and
walking itself.
It is strongly recommended that the user calibrates the pedometer to its personal
moving pattern. Otherwise this unit will use only statistical data based on the weight
and height input by the user. The performance of the unit will not be in this full
capacity.
Pedometer Calibration3.4
You can choose between YES and NO with the SEL key. Choose YES and confirm
with the SET key or choose NO for calibrating later.
•The unit enters into Calibration RUNWALK mode, press SET to confirm and
advance to SET RUNWALK Distance.
•Press SEL to set the run distance, increment by 100 meter (= 109,36 yards).
Press SET to confirm the distance. Now the unit is ready for Calibration
Running Stripe Length. The display shows “PRESS START”. Then press
SET and start running.
•At the time distance covered, press SET to stop. Display “DONE and
SAVED” appears. The calibration was correct and was saved.
ATTENTION:
You can only enter the distance for calibration in meters. 100 meters are 109,36
yards. This means that you should walk/run a distance of 100 m resp. 109,36 yards.
This is the usual length of a track in a stadium.
Note: It is important that you also perform the calibration for walking, as described in
the following section:
Pedometer with Speed Sensor Function Keys/Modes/Setting
_____________________________________________________________
AFTER SALES SUPPORT service@produktservice.info Toll Free Number 1-800-493-9137
7
•The display shows “CALI” and “Walk” is flashing. Press SET again to
confirm the calibration for running and enter calibration for walking. Repeat
above process for walking.
Calibration not successful
In case the calibration was not successful, the display “FAIL” appears. After a few
seconds the display “CALI” for “Run” or “Walk” appears again and you can start a
new calibration.
Note: After calibration, if the height is changed, all calibrated data will be lost. And
the stride length will be reset according to the new entry of height.
Turn ON/OFF Pedometer Function
Press SET key until the “2 foot print icon” ( ) appears to turn on pedometer
function. To turn off, press SET key again. The “2 foot print icon” disappears.
Note: Pedometer can’t be turned ON/OFF when it is in 1) Stopwatch mode and 2)
Memory Mode.
Pedometer with Speed Sensor Operation Modes
_____________________________________________________________
AFTER SALES SUPPORT service@produktservice.info Toll Free Number 1-800-493-9137
8
4. OPERATION MODES
The unit has 4 operation modes: Main, Exercise, Record and Memory.
Scroll through the operation modes by pressing the MODE key.
Main Mode4.1
By pressing the SEL key in the main mode, you can see current information of STEP
in upper display and sub information in lower display as below:
•CLOCK
•EXERCISE TIMER
•DISTANCE and
•CURRENT SPEED
Note: Distance and Timer reset automatically every night at 0:00.
Exercise Mode4.2
By pressing the SEL key in the Exercise mode, you can choose between the sub
functions
•Target Zone
•Stop watch
Pedometer with Speed Sensor Operation Modes
_____________________________________________________________
AFTER SALES SUPPORT service@produktservice.info Toll Free Number 1-800-493-9137
9
4.2.1 Target Zone
User can select one of the following targets for his own daily workout target Distance,
Speed, Step and Timer.
The unit default is Target Step. If user desire other workout data, please hold SET
key in Exercise Mode until “SET” appears on the second as in figure.
•Press SEL to toggle between four target types, press SET to confirm.
•Press SEL to advance to desired target values, press SET to confirm
4.2.2 Target Alert
For Step, Timer and Distance, there will be an alert when target met. For Speed,
there will be an alert when speed is below target.
The unit defaults are as following:
Target Step: 10000 steps
Target Timer: 1 hour
Target Distance: 5 Km/Mile
Target Speed: 0 Km/hr or Mile/hr
Once selected, the pedometer mode will display the selected information
Pedometer with Speed Sensor Operation Modes
_____________________________________________________________
AFTER SALES SUPPORT service@produktservice.info Toll Free Number 1-800-493-9137
10
4.2.3 Activate/Deactivate Target Alert
Hold SEL key in exercise mode pressed for 3 seconds to activate/deactivate target
alert in exercise mode.
Alert symbol is displayed = alert on
Alert symbol not displayed = alert off
4.2.4 Stopwatch Mode
In exercise mode the user can change to Stopwatch mode by pressing SEL key.
Daily Record Mode4.3
Calorie, Fat Burn, Average Speed and Maximum Speed automatically are recorded
daily. These data reset every night at 0:00.
Scroll through the records by pressing the SEL key.
Note: Features Reset – including Daily Step, Training Timer, Distance, Calorie, Fat
Burn, Average Speed, Maximum Speed. In Record Mode, hold SET key to reset all
daily data to 0.
Memory Mode4.4
This unit will record daily data (step, distance, fat burn, calories, timer) for the past
seven days and 7 days accumulated data (total step, total distance, total calorie, total
fat burn).
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
