Albatron KM51G-754 Manual de usuario

KM51G-754

All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed,

stored in a retrieval system or translated into any language or computer language, in any form

or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise,

without the prior written permission of the company. Brands and product names are trademarks

or registered trademarks of their respective companies.

The vendor makes no representations or warranties with respect to the contents herein and

especially disclaim any implied warranties of merchantability or fitness for any purpose. Further

the vendor reserves the right to revise this publication and to make changes to the contents

herein without obligation to notify any party beforehand. Duplication of this publication, in part or

in whole, is not allowed without first obtaining the vendor’s approval in writing.

Trademark

All the trademarks or brands in this document are registered by their respective owner.

Disclaimer

We make no warranty of any kind with regard to the content of this user’s manual. The content

is subject to change without notice and we will not be responsible for any mistakes found in this

user’s manual. All the brand and product names are trademarks of their respective companies.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits of a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense. However, there is no guarantee that

interference will not occur in a particular installation.

CE Mark

The device is in accordance with 89/336 ECC-ENC Directive.

Ver: EG101

KM51G-754

nVIDIA®GeForceTM 6100 (nForce4 C51G) &

nForceTM 410 (nForce4 MCP51G)

Supports Socket 754

AMD AthlonTM 64/ SempronTM Processor

User Manual

Dimensions (Micro-ATX Form-Factor):

z244mm x 219mm ( W x L )

Operating System:

zWindows® 2000/ XP

Things You Should Know

0The images and pictures in this manual are for reference only and may vary from the

product you received depending on specific hardware models, third party components

and software versions.

0This mainboard contains very delicate IC chips. Always use a grounded wrist strap

when working with the system.

0Do not touch any IC chip, lead, connector or other components.

0Always unplug the AC power when you install or remove any device on the mainboard

or when confuguring pins and switches.

Packing List

KM51G-754 mainboard

FDD Cable

HDD Cable

SATA Cable

I/O Bracket

SPDIF Cables (Optional)

Mainboard User Manual CD

Mainboard Setup Driver CD

Mainboard Quick Installation Guide (optional)

Symbols

The following list explains the convention for symbols that will be used throughout this

manual:

Attention- Im

ortant Information

Follow the procedures below…

Troubleshooting Tips

Refer to other sections in this manual…

Table of Contents

CHAPTER 1. GETTING STARTED ....................................................0

INTRODUCTION.......................................................................................................0

SPECIFICATION .......................................................................................................1

CONFIGURATION ....................................................................................................3

Layout of KM51G-754....................................................................................3

HARDWARE INSTALLATION ...................................................................................4

CPU Processor Installation..............................................................................5

Memory Installation ........................................................................................6

Back Panel Configuration................................................................................7

Connectors.......................................................................................................9

Front Panel Headers.......................................................................................10

Headers & Jumpers........................................................................................11

Audio Configuration......................................................................................13

Slots...............................................................................................................14

Power Supply Attachments............................................................................14

CHAPTER 2. BIOS SETUP........................................................... 15

INTRODUCTION.....................................................................................................15

KEY FUNCTION.....................................................................................................15

MENU DESCRIPTION.............................................................................................16

CHAPTER 3: TROUBLESHOOTING................................................. 17

APPENDIX I: SUPER 5.1 CHANNEL AUDIO EFFECT SETUP....................................20

APPENDIX II: RAID 0/1 SETUP.............................................................................21

Chapter 1. Getting Started

Introduction

Mainboard KM51G-754

Congratulations on the choosing the KM51G-754 Mainboard. It is based on the nVIDIA®

GeForceTM 6100 (nForce4 C51G) Northbridge chipset and the nVIDIA®nForceTM 410 (nForce4

MCP51G) Southbridge chipset; with possessing integrated graphics feature. The mainboard

supports the AMD AthlonTM 64/ SempronTM Processor with system bus 800 MHz (1600 MT/s).

The KM51G-754 provides two DIMM (Dual In-Line Memory Modules) sockets. It allows you to

install 184-pin, non-ECC unbuffered, DDR400(PC3200)/DDR333(2700)/DDR266(PC2100)

SDRAMs, and supports to install a total memory capacity of 2GB.

This mainboard provide one PCI-E x16 slot and two PCI slots for use with a graphics card or

expansion cards which the interfaces compatible. In addition, one PCI-E x1 slot is provided by

the mainboard for use with an expansion card which the PCI-E x1 interface compatible.

The KM51G-754 provides one floppy disk drive connector that can be used with 360KB/720KB/

1.2MB/1.44MB/2.88MB drives. It also has two IDE connectors for hard drives supporting PIO

mode 0~4, Block mode, and Ultra DMA 66/100/133. In addition, the onboard Serial ATA II

comes with two SATA II connectors, which the interface can provide up to300 Mbps

transmission speeds and also support RAID 0 and 1 mode (See Appendix II).

The onboard AC’ 97 sound codec supports high quality 6-channel audio play (Super 5.1

Channel Audio Effect) (See Appendix I) and supports the Sony/Philips Digital Interfaces

(SPDIF) functionality.

This mainboard also comes with an onboard 10/100 Mbps Ethernet LAN chip. There is a LAN

port on the case back panel that you can directly plug into an Internet cable.

All the information (including hardware installation and software installation) in this manual are

for reference only. The contents in this manual may be updated without notice. The company

will not assume any responsibility for any errors or mistakes within.

Specification

CPU:

zSupports Socket 754

zSupports AMD AthlonTM 64/ SempronTM Processor

zSupports Hyper-TransportTM Link Technology

zSupports system bus 800 MHz (1600MT/s)

Mainboard KM51G-754

Chipset:

zNorthbridge Chipset – nVIDIA®GeForceTM 6100 (nForce4 C51G)

zSouthbridge Chipset – nVIDIA®nForceTM 410 (nForce4 MCP51G)

zI/O Controller – ITE®IT8712F

zAC’ 97 Aduio Codec – Realtek®ALC655

zLAN Controller – Realtek®RTL8201BL/RTL8201CL

Memory:

zTwo DIMM sockets, support a total memory capacity of 2GB

zSupports to use the 184-pin, non-ECC unbuffered, DDR400(PC3200)/DDR333

(PC2700)/DDR266(PC2100) SDRAMs

Slots:

zSupports one PCI-E x16 slot, one PCI-E x1 slot, and two PCI slots

FDD Connector:

zOne floppy disk drive connector, supports up to two FDDs

zSupports 360KB/720KB/1.2MB/1.44MB/2.88MB

IDE Connector:

zTwo IDE connectors, support up to four IDE devices

zSupports Ultra ATA 66/100/133

zSupports high capacity hard disk drives

Serial ATA II Connector:

zTwo SATA II connectors, support up to two SATA II HDDs

zSupports SATA 2.0 specification and provides 300 Mbps transmission speeds

zSupports RAID 0 and 1 mode

I/O facility Connectors:

zOne PS/2 mouse port and one PS/2 keyboard port

zOne printer port

zOne COM port

zOne VGA port (D-sub port)

USB Ports:

zFour onboard USB 2.0/ 1.1 ports

zTwo front USB headers come with this mainboard, and support a maximum of four

Mainboard KM51G-754

additional USB ports to be set

Onboard AC’ 97 Sound Codec:

zHigh performance Codec with high S/N ratio (>90 db)

zCompliant with AC’ 97 2.3 specification

zSupport 6-channel playback capability (Super 5.1 Channel Audio Effect)

zSupport 3D stereo enhancement

zSupport Sony/ Philips Digital Interfaces (S/PDIF) functionality

Onboard LAN Chip:

zSupports 10/100 Mbps Ethernet LAN

BIOS:

zPhoenix-Award™ BIOS

zSupports APM1.2

zSupports ACPI2.0 power management

Green Function:

zSupports Phoenix-Award™ BIOS power management function

zSupports system-wake-from-power-saving-mode by keyboard or mouse touching

Hardware Monitor Function:

zMonitors CPU/ Chassis Fan Speed

zMonitors CPU and system temperatures

zMonitors system voltages

Configuration

Layout of KM51G-754

Mainboard KM51G-754

nForce

410

JPRNT1

JKBMS1

JUSB1

JAUDIO1

JUSBLAN1

BIOS

PCI-EX1_1

PCI-EX16

PCI1

FDD1

BAT1

JCOM1

JUSBV1

JCDIN1

Codec

LAN

PHY

JFAUDIO1

JATXPWR2

JSPDIF_OUT1

PCI2

Super I/O

JUSBV2

JUSB2

JUSB3

DIMM2

DIMM1

JSFAN1

JCI1

JCMOS1

JPANEL1

IDE1

IDE2

JATXPWR1

JCFAN1

GeForce

6100

CPU1

JVGA1

JSATA2

JSATA1

Hardware Installation

This section will assist you quickly in installing your system hardware. Wear a wrist ground strap

before handling components. Electrostatic discharge may damage your system components.

Mainboard KM51G-754

CPU Processor Installation

This mainboard supports AMD®AthlonTM 64/ SempronTM processor using a Socket 754. Before

building your system, we suggest you to visit the AMD website and review the processor

installation procedures. (http://www.amd.com)

CPU Socket 754 Configuration Steps:

1. Locate the CPU socket on your mainboard and nudge the locking lever away from the socket.

Then lift the lever to a 90-degree angle.

2. On the socket, locate the corner which has the “diagonally cut-corner” on the rectangular

shaped pattern of pinholes (see diagram below-left). Match that corner with the “gold triangle”

on the CPU (see diagram below-right) and lower the CPU onto the socket. The bottom of the

CPU should be flush with the face of the socket.

Diagonally

Cut-corner

Gold triangle

3. Lower the lever until it snaps back into position. This will lock down the CPU.

4. Smear thermal grease on top of the CPU. Lower the CPU fan onto the CPU and use the

clasps on the fan to attach it to the socket. Finally, extend the power cable from the fan and

insert it onto the “CPUFAN” adapter.

FAN Headers: JCFAN1, JSFAN1

There are two fan headers available for cooling fans. The cooling fans play an important role in

maintaining ambient temperatures in your system. The JCFAN1 header is attached with a CPU

cooling fan. The JSFAN1 header is attached with other cooling fans.

Attention

DO NOT touch the CPU pins in case they are damaged. Also, make sure

that you have completed all installation steps before powered on the

system. Finally, double-check that the cooling fan is properly installed and

rely attached, in case your CPU and other

the CPU fan power cord is secu

sensitive components are damaged because of high temperatures.

Mainboard KM51G-754

Pin Assignment

1 Ground

2 Power (+12V)

JCFAN1/ JSFAN1 3 FAN RPM rate sense

On most fan power cord, the black wire of the fan cable is the “ground”

and should be attached to pin-1 of the header.

Attention

You can avoid damaging your CPU due to high temperatures with

proper cooling equipment. It is recommended that attach a cooling fan

on top of your CPU. Use the JCFAN1 header to attach the fan cord.

Memory Installation: DIMM1/2

The KM51G-754 provides two DIMM (Dual In-Line Memory Modules) sockets. It allows you to

install 184-pin, non-ECC unbuffered, DDR400(PC3200)/DDR333(2700)/DDR266(PC2100)

SDRAMs, and supports to install a total memory capacity of 2GB.

Memory Setup Steps:

The following instructions explain how to set memories onto the DIMM sockets for this

mainboard.

1. Pull the white plastic tabs at both ends of the socket away.

2. Align a memory

on the socket such that the notch on the memory matches the break on the socket.

Tabla de contenidos

Otros manuales de Placa madre de Albatron

Albatron

Albatron KX18DS PRO II Manual de usuario

Albatron

Albatron PX845PEV-800 Instrucciones de uso

Albatron

Albatron PX915PD Series Manual de usuario

Albatron

Albatron PXP965 (V2.0) Manual de usuario

Albatron

Albatron KM266 Series Manual de usuario

Albatron

Albatron PXP45 Manual de usuario

Albatron

Albatron KI51PV-754 Manual de usuario

Albatron

Albatron KX520LE Manual de usuario

Albatron

Albatron KX400+ Pro-C Manual de usuario

Albatron

Albatron PX865PE Series Manual de usuario

Albatron

Albatron KX18DS PRO II Manual de usuario

Albatron

Albatron kx600s Manual de usuario

Albatron

Albatron KI690-AM2 Manual de usuario

Albatron

Albatron PX865PE Series Manual de usuario

Albatron

Albatron PI965GME-M Manual de usuario

Albatron

Albatron KM400T-8X Series Manual de usuario

Albatron

Albatron PM845GV1 Manual de usuario

Albatron

Albatron PXP43 Manual de usuario

Albatron

Albatron PX865PEC PRO(2.0) Manual de usuario

Albatron

Albatron PM915-478 Manual de usuario

Albatron

Albatron K8Ultra-U Series Manual de usuario

Albatron

Albatron PM945GC Manual de usuario

Albatron

Albatron KM400TA Series Manual de usuario

Albatron

Albatron PM800 Series Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario