Akura Digital LCD Color TV Receiver Manual de usuario
Operation Instructions
Digital LCD Color TV Receiver
Table of Contents
1.Precautions
2.Accessories
3.Appearance
4.Remote Control Application
5.Basic Operation Methods
6.DVB-T Menu Operation
6.1.Auto installation
6.2.Installation setup
6.3.Program receive and shift
6.4.Program search function
6.5.Main menu option
6.6.Parental control
6.7.System setup option
6.8.
6.9.Game menu option
6.10.DIY menu setting
6.11.Error message
6.12.Menu Analog quantity
6.13.Off-time setting
7.ATV Menu Operation
8.In Order to Receive clearer picture
9.Before you request for repair
10.Technical parameters
Accessory Setting
1
3
4
5
8
10
10
14
17
19
21
24
26
32
34
35
37
38
39
40
45
46
47
1. Precautions
Storage and Keeping
Maintenance
Please plug off all connection wires before you start cleaning this machine.
Keep this machine
away from too hot
or too cold places.
The storage
temperature of this
machine is -20~
60 , the
application
temperature of this
machine is 5~35 .
Never use this
machine near
bathtub,
washbasin, and
kitchen, etc places
with water or at
damp basement,
swimming pool or
similar places.
Never make the
TV set under
effect of moisture,
dust or oil smoke
etc. environment.
Avoid this
machine from
dropping or
impacting.
Never extrude
or chafe this
machine with
sharp objects.
Never put this
machine within
certain box at
your will or place
it at too-
oscillating place
and under further
severe collision.
Please wipe the
machine cover,
display screen
and buttons with
soft cloth
dipped with
little soft
abluent.
Never wipe this
machine with
abrasion cloth,
abstergent
powder, alcohol
and benzene etc.
various
propellants or
chemical
cleaning media.
Alcohol
Special Notice
!
!
Warning!
1. For the sake of safety for yourself and others, please do not watch
or turn on the TV set while driving.
2. It is very dangerous to watch or operate TV while driving.
A few highlights or dark spots may occur on the LCD screen. It is a very
common phenomenon of the active matrix display technology, and does
not mean any defects or faults. Never try to repair this machine by yourself.
In case of any fault or failure, please turn off the display at once, and notify
our Company or the correspon ding dealer. The display is made up of many
precision electronic components. Any disassembly or modification may lead
to further damage.
1.Only the attached AC adapter and the automobile adapter (12V) are suitable.
2.For the sake of safety, when you do not intend to use the display, please
unplug the AC adapter or automobile adapter.
Operation Precautions
1.Please don't tune your headphone / earphone at too high volume, otherwise,
it may lead inconvenience and danger to yourself and other people.
2.For open-designed earphone, to avoid influencing your periphery, please
tune down the volume.
3.In case of any tinnitus, please tune down the volume or stop using this
machine.
4.It is recommended by the aurists that the earphone should not be
continuously used for a prolong period.
Earphone Operation Precautions
2. Accessories
AV in/out
cord
AC adapter
Digital
TV antenna
AAA type
batteries
Remote
control
Car adapter
Base support
Double-side
adhesive tape
for base support
13
14
15
16
17
18
19
14
10
3
11
12
5678
29
3. Appearance
1.Remote receiving window
2.Menu
3.Confirm OK (DTV mode)/
Auto search (TV mode)
4.Volume - /Leftward
5.Volume+/Rightward
6.Channel - /Downward
7.Channel+ /Upward
8.Power indicator
9. ON/OFF
DVB/ATV/AV
Press and hold for 3 seconds
to turn off TV set
10.Telescopic antenna
11.TFT-LCD screent
12.Base support
13.Stereo Earphone jack
14.DVB-T AV Output jack
15.AV Input jack
16.12V DC Input jack
17.Loudspeaker
18.Antenna input jack
19.Antenna output jack
Shift
4. Remote Control Operation
Power on/off /Standby
Auto Search/
Auto adjust
Add the current program
to My Favourite Channel
Enter Game menu
Program Edit Table
Turn on Teletext
Display Electronic
Program Guide
Mute
Volume Adjust
/CH+ -/Direction
Main Menu
Input numbers/
Channel keys
Output Video Signal
PAL/NTSC Select
Analog quantity adjust
OSD Language
Select
My Favourite
Channel on/off
Nine Picture Guide
Information
Display
Return to Last
Program/Menu(Exit)
DVB Confirm
L/R Sound Output
Shift
Pause
DVB Music Shift
Sleep timer/
Clock setup
DVB/ATV/AV
Shift
Return to the
previous program
Picture Mode
Caution
1.Please align the remote control with the infrared-receiving window on TV set in
operation.
2.Never oppress, drop, wet or disassemble the remote control.
3.Never press any button continuously and swiftly. Operation interval is at least 2 seconds.
4.Press Power to turn on the TV before pressing CH+, CH- for channel selection.
5.If the remote control were not to be used for a long time, please remove batteries.
Channel keys (digit keys (0-9) and - / - - ): There are 0 ~ 255 in total of 256
channels available on the remote control for your option by the 11 buttons
of 0-9 and - / - - on the remote control. When the channel is a one-digit
figure, just press the corresponding digit key. If the channel is a tw o-digit
figure, you should press - / - - first to show - - on the display screen before
further pressing the corresponding digit keys. (ATV mode only)
POWER (Power On / Off):
Press this button to turn off the TV , press it again to turn on the TV.
LANG:
Press this button to realize the switch of German, French, Dutch, English,
Spanish, Portuguese and Italian OSD menu language(Under DVB mode,
volume OSD language English).
SEARCH: (Auto adjust)
a. Start Auto search in DVB mode.
b. Press and hold for 5 seconds to realize auto search in ATV mode.
MEMORY: Add the current program to my favourite program(DVB mode only)
Press this button to add the current program to My favourite channel list.
FAVORITE PR: My Favourite Channel option on/off (DVB mode only).
GAME: Press this button to enter the game menu(DVB mode only).
TELETEXT: Turn on the teletext option to watch teletext information
(DVB mode only).
GUIDE: Enter nine picture guide function (DVB mode only).
PRLIST: Enter the Program Edit List function (DVB mode only).
EPG: Press this button to display (DVB mode only)Electronic Program Guide .
INFO: Press this button to display the information of current program.
MENU: Press this button to display the main menu.(Press MENU to select
analog level when using AV function.)
EXIT: Return to last program or menu.
CH / (Channel select):
Press CH ,the number of TV channel increases.
Press CH , the number of TV channel decreases.
VOL-/+ (Volume adjust):
Press VOL-, the volume of TV set decreases.
Press VOL+, the volume of TV set increases.
OK: Confirm key (DVB mode only).
MUTE (Mute):Press this button, the sound will disappear. Press it again or
pressVOL+ to resume the normal sound.
AUDIO: Press this button to realize the switch of L/R sound output .
0,1,2,3,...,9: Channel keys: Press to chose the corresponding channel.
Pause (DVB mode only): Press it to pause the picture or sound.
TV/RADIO: Shift between TV and Radio (DVB mode only).
Sleep: Off-time setup. You can set Sleep Timer to automatically turn off
the TV set within 120 minutes.
P/N(-/--)
switch
(in DVB mode)
:
a. Press this button to to color system of output video signal
.
b. Press this button to select channels in ATV mode. Press the button, then
press 0-9 digital keys to chose a two-digit or three- digit channel.
Return: Press this button to return to the previous channel. Press it again
to return to the current channel.
DVB/ATV/AV shift: Press this button to shift between Digital TV,
analogue TV and Vedio/Audio(AV).
+/-: Bright, contrast. Color, and TINT analog quantity adjust.(Only DVB mode)
Press Mode, then press +/- to adjust the analog quantity of bright, contrast ,
color or TINT.
Mode:(Picture mode)
a. In DVB mode, press this button to select the items between bright, contrast,
color and TINT. Then press +/- to adjust the analog quantity of the chosen
item .
b. In ATV mode, press this button to realize the five picture modes: Standard,
Soft, Vivid, Light and Personal.
c. In AV mode, this button has no use. To adjust the picture mode, please use
Menu button.
5. Basic Operation Methods
Basic interface connection
5.1.Connection of Power Supply:
Align the power supply plug on AC
adapter with the jack on the machine
cover marked with DC12V.
5.2.Connection of External Antenna:
Unplug the telescopic antenna plug,
then plug the attached antenna plug into
the antenna jack on the TV set
If the earphone is applied, the sound only transmits through the earphone,
and no sound is available from the loudspeaker of the TV set.
Notice
5.4.Connection of Stereo Earphone:
Align the earphone plug with the
earphone jack on the TV set, and
just plug in .
5.3.Connection of Telescopic Antenna:
Align the telescopic antenna plug with
the antenna jack on the TV set, and
just plug in .
5.5.Connection of AV Input
Just insert the plug of the external
video cord into the yellow port of the
AV exchange head and the audio left
track plug into the white port and
audio right track plug into the red port.
Then insert the AV head into AV/IN
jack of the TV set.
Tabla de contenidos
Otros manuales de Receptor de TV de Akura
