AK-NORD LXL Series Manual de usuario
AK-Nord GmbH
Werner-von-Siemens-Straße 14
49584 Fürstenau
Gemany
Tel:
+49 (0) 5901/93 890-10
Fax:
+49 (0) 5901/93 890-24
Internet
www.ak-nord.com
E-Mail:
Manual
LXL Serie:
USB-Server
12.06.2020
2
Content
Setup ........................................................................................................................................3
Access via Network .........................................................................................................3
Telnet-Configuration.......................................................................................................4
MAIN MENU: ...................................................................................................................5
ADMIN MENU: ................................................................................................................6
GENERAL MENU: ...........................................................................................................7
NETWORK MENU:..........................................................................................................8
IP MENU: ..........................................................................................................................9
DNS MENU:....................................................................................................................10
NTP MENU: ....................................................................................................................11
INTERFACE MENU:......................................................................................................12
USB1 INFO:.....................................................................................................................14
CONFIG MENU .............................................................................................................. 15
DESTINATIONS.............................................................................................................16
VirtualHere ...........................................................................................................................17
Rescue-Modus.....................................................................................................................18
Factory Settings: ...............................................................................................................19
12.06.2020
3
Setup
Access via Network
The devices from AK-Nord are delivered from the factory with the DHCP
setting activated. I.e. you need a started DHCP server in your network, so
that a LXL device gets a valid IP from this server.
To determine which IP address the device has received, please install the
XTAdminXXL tool from AK-Nord. You can find this on our website www.ak-
nord.de in the download area.
If you do not want to install the XTAdminXXL tool, you can alternatively
look up the assigned IP address in the logs of the DHCP server using the
MAC address of the device.
If you do not want to install the XTAdminXXL tool, you can alternatively
look up the assigned IP address in the logs of the DHCP server using the
MAC address of the device.
12.06.2020
4
Once you know the assigned IP address of the device, you can configure it
via Telnet menu (port 23).
For this purpose please use the Telnet window in our XTAdminXXL tool or
one of the other Telnet programs like e.g. PuTTY.
Telnet-Configuration
The first thing you will see is the password window. The default password
is xt. For security reasons, you should change this password during the
initial configuration.
After entering the password correctly, you will get to the main menu.
Navigation through the Telnet menu is very simple. You have a menu item
ID in front of each menu item. This is usually a letter or a number like "a"
for the "ADMIN MENU" or "1" for the hostname:
a : ADMIN MENU“
1 : Hostname = USB-SERVER-LXL
12.06.2020
5
Enter "a" to call up the ADMIN MENU. Press "q" to close the current menu
and return to the previous menu. Entering "q" in the MAIN MENU
terminates the Telnet connection to the device. To change a configuration
value, you must enter the <menu item ID>=<new value>. For the host
name, for example, it would look like this:
1=usbserver_webcam
MAIN MENU:
12.06.2020
6
ADMIN MENU:
1 : Telnet port
Here you can configure the port for network access. Default is 23.
2 : USB1 port
Here you can define the TCP/IP or UDP port that is allowed for the USB
interface. Data can be received from or sent to USB via this port.
a : Apps
Here you can start or stop the AK-Nord programs.
b : Apps autostart
Configuration of Autostart when booting the AK-Nord programs.
c : Services
Here you can start or stop Linux services like e.g. NTP server.
d : Services autostart
Here you can configure the autostart of Linux services at boot time.
12.06.2020
7
GENERAL MENU:
s : SYSTEM INFO
Here you can view the system information like Linux version, runtime etc..
m : MEMORY INFO
Here information about the consumption of the working memory is
displayed.
12.06.2020
8
NETWORK MENU:
12.06.2020
9
IP MENU:
d : DHCP(Y/N)
Here you can configure whether the IP address should be obtained
dynamically from a DHCP server or not.
1 : IPv4 address
If DHCP is active, the current IPv4 address of the device is displayed here.
If DHCP is switched off, the fixed IP address for the device can be
assigned here.
2 : Subnet mask
If DHCP is active, the network mask assigned by the DHCP server is
displayed here. If DHCP is switched off, the network mask can be assigned
manually here..
3 : Gateway
A gateway can be configured manually here if DHCP is off. When DHCP is
enabled, the gateway assigned by the DHCP server is displayed here.
12.06.2020
10
DNS MENU:
1 : Hostname
Here you can configure the host name of the device. The following
characters are allowed: 0-9, A-z, minus sign and dot.
2 : Nameserver1
Here you can enter IP address of your 1st name server manually.
3 : Nameserver2
Here you can enter IP address of your 2nd name server manually.
Tabla de contenidos
Otros manuales de Servidor de AK-NORD
