Aiwa ABT-100A Manual de usuario

ABT-100A

1

Customer Service.

. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

. This product is not a toy! Children should be supervised to ensure that

they do not play with the appliance.

. Do not use the speaker in direct sunlight or high humidity conditions.

. Do not throw in ﬁre, crush, puncture, dismantle or otherwise damage

the batteries.

. Do not expose batteries to heat or ﬁre as they may explode.

. Do not dispose of batteries in your household waste. Contact your local

council for information on disposal or recycling.

2

Input

USB or microSD card into the respective slots to play music

When using for the ﬁrst time, please do an automatic channel scanning.

Microphone function is activated once a microphone is plugged into the

MIC IN port.

microSD

microphone volume.

microphone volume.

microSD card

On/O/Master Volume:

Rotate the dial to the right (past the initial click) to turn on the unit.

Rotate the dial left or right to adjust volume.

Rotate fully to the left to turn o the unit.

MICROPHONE FUNCTION DESCRIPTION

3

'blue' will be displayed on the LED Display.

you will hear an audio prompt.

.Use a 3.5mm auxiliary audio cable to connect your external device’s

(e.g. mp3 player) ‘Line Out’ port to the ‘AUX IN’ port on the speaker.

.Turn on your external device and start playback.

If you have two ABT-100A speakers, you can use them together in

Bluetooth mode to enjoy stereo sound.

Note:

.Stereo audio only works from Bluetooth source, and only when both speakers

are in Bluetooth mode.

.Your Bluetooth-enabled device must be connected only to one of the

2 speakers via Bluetooth. If connected to both, disconnect from one.

1.Turn on the 2 speakers in Bluetooth mode, thenlong press the Mode Buttons

on both speakers at the same time, the display will show CON indicating that

the 2 speakers are now connected wirelessly. Next time you turn on the

speakers, they will connect automatically.

2.Connect your Bluetooth-enabled device (like a smartphone) to ONE

of the speakers, not both.

3.When you play Bluetooth audio from your Bluetooth-enabled device,

this will be played in stereo on both speakers.

4.To disconnect, long press the Mode Button on one of the speakers, the

display will show DIS indicating that the two speakers are now disconnected.

Auxiliary Line-in (AUX) Operation

Connecting two speakers for stereo sound

(optional, requires two speakers)

Aiwa ABT-100A

4

an audio prompt.

USB, microSD

to your computer or a USB adaptor.

Solution: Make sure that the speaker has already been disconnected before

making a new connection to a new device.

Solution: Music format is not playable. Only mp3 formats are playable on

this speaker.

Aiwa ABT-100A

Tabla de contenidos

Otros manuales de Oradores de Aiwa

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP

HP GL313AA - USB Speakers PC Multimedia Manual de usuario