Airpura F600 Manual de usuario
1
F600
AIR PURIFIER
CONTENTS
IMPORTANT SAFEGUARDS 4
THE AIRPURA SYSTEM 5
GETTING CLEAN AIR AT HOME 6
HOW TO CHANGE YOUR FILTER 8
TECHNICAL SPECS 13
WARRANTY 14
Congratulations on your purchase of
the Airpura air purier. Please read
this user manual carefully before
operating to familiarize yourself with
the unit and the proper usage of it.
Keep this user manual in a safe place
for future reference.
4
• Inspect the exterior of your Airpura to verify that there is no damage
from shipping.
• If any damage is noted, please follow the instructions from the
distributor returns policy.
• Wipe the unit with a damp cloth to remove any dust from packaging.
• Please ensure air purier is turned OFF when plugging into a power
source. Failure to do so may result in motor potentially stalling and/or
burning.
• Plug the unit into a regular grounded 110-volt outlet.
• Cleaning and user maintenance should not be made by children without
supervision.
• Appliances that are obviously damaged must not be operated.
IMPORTANT SAFEGUARDS
5
MAXIMUM AIR FLOW
Our puriers oer an
airow of 560 CFM which
is more than other units on
the market.
ADJUSTABLE
CONTROLS
Adjust to your ideal
level of ltration with
variable speed setting.
PREFILTER
Filters out larger
contaminants such as
dust, pollen, pet dander
and mold spores, while
protecting lifespan of
main lters.
CARBON FILTER
Our puriers contain
18-26 lbs of activated
carbon that will adsorb
airborne chemicals,
gases and odors.
ONLY CLEAN AIR
HEPA eciency lter
in a pressure sealed
lter chamber traps
99.97% of airborne
particles, as small as
0.3 microns.
THE AIRPURA SYSTEM
EXPERIENCE THE EVOLUTION OF CLEAN AIR WITH THE AIRPURA SYSTEM
6
You have taken the rst step in creating a healthy environment. It should
be noted that this purier is not intended to be the main protection against
pollutants. The source of your pollution should always be eliminated or
reduced. The purier will sustain clean air in your space. This air purier is not
intended for industrial use.
GETTING STARTED
When you receive your unit, turn on the unit to the MAX level and allow it to
run for at least 30 minutes to burn o any residuals from transport and allow
lters to settle in.
REGULATING FAN SPEED
The purier can be set to run at variable speed settings allowing you to
control your air ow.
GUIDE TO GETTING CLEAN AIR
AT HOME
30
min
Maximum setting
Low setting
Purier turned o
7
TIPS TO OBTAIN THE BEST RESULTS
• It is recommended to run your purier at low speeds, 24 hours a day, 7
days a week. Running it at a low speed allows for maximum dwell time of
chemicals and VOCs in the air through both the carbon and HEPA lters
thus delivering superior ltration.
• Purier should be positioned at least 1 foot away from any wall or
furniture to prevent obstruction of air intake.
• Purier should be put in the general area that has the most pollution or
the room you spend the most time in. For example, if you spend most of
your day in the oce or living room, keep it there. At night, you can move
it to your bedroom area.
• Always maintain a humidity level of 35% or less in your home to ensure
the unit is operating at optimal levels. Overly humid conditions can have
an adverse eect on the performance of the carbon. When using purier
with a humidier, please keep humidier at least 6 feet away.
• At the beginning of product use, it is possible the carbon lter may emit
an odor. This smell will dissipate after 2 weeks.
• It is not recommended to operate purier in area where food is being
cooked, particularly near sh, meats and fried foods. Oil on carbon lter
can shorten lter life. Proper ventilation should be used when cooking.
After area has been properly vented, the purier can be used to maintain
fresh air.
IMPORTANT: In order to keep your purier in peak condition, it is essential to
replace your lters regularly. To help remind you, a Filter Replacement Date
sticker has been included with the purchase of this unit. Fill it out with the
dates you need to replace your lters using the recommendations provided
on page 8 of this manual. Ax to your purier as a reminder.
F600
Filter Replacement Date
Prelter:
HEPA:
Carbon:
FILTER REPLACEMENT DATE STICKER
8
Filter should be changed regularly as per recommended time indicated. These
recommendations are based on normal usage and pollution levels. Higher
than average levels of pollution may cause the lters to saturate quicker and
may require a lter change in less than recommended times.
1. Prelter
2. HEPA Filter
3. Carbon Filter
Cloth for aesthetics alone
CHANGING YOUR FILTERS
Filter Recommended
replacement time
1. Prelter* Poly Prelter 600
(2-pack)
6 months under normal
conditions
3 months for high
pollution levels
2. Particle lter HEPA 600RVHU Filter
(99.97 % ecient @ 0.3
Microns)
5 years under normal
conditions
3 years for high pollution
levels
3. Chemical gas
& odor lter
18 lbs Enhanced Carbon
Blend (17% potassium
permanganate, 83%
coconut shell)
2 years under normal
conditions
1 year for high pollution
levels
*PREFILTER HANDY TIP!
The prelter can be vacuumed from the exterior of the unit once
a month or more often.
To vacuum the Prelter
Use the brush attachment on your vacuum cleaner and vacuum
slowly around the exterior metal surface of the lter chamber.
SUGGESTED REPLACEMENT TIMES
There are 3 sets of lters in your Airpura F600.
9
1. Turn the air purier
over and remove 4
retaining screws using a
screwdriver.
1. Remove the HEPA
lter located in the
center of the unit.
2. Remove cover.
2. Replace with the new
HEPA lter*.
*Ensure the open side
of the HEPA lter is
placed headrst.
3. Remove gasket
and set aside.
OPENING THE FILTER CHAMBER
REPLACING THE HEPA
Before attempting to replace your lters, follow
steps to open the lter chamber:
SAFETY NOTE:
Power must always be
disconnected when replacing
your lters.
10
1. Remove the HEPA
lter located in the
center of the unit and
set aside.
4. Insert the tube into
the lter chamber
inside the prelter,
opening the top of the
spiral to make a slight
funnel.
2. Remove the old
carbon lter. Be careful
when lifting out. A used
carbon lter is heavy.
5. Insert the carbon
lter into the top of
the funnel and allow to
slide in.
3. Take your lter slider
and roll into a spiral.
(supplied with purchase
of replacement carbon
and HEPA lters.)
6. Pull the lter slider
out allowing the carbon
to slide to the bottom
of purier.
7. Replace the HEPA
lter that had been set
aside.
REPLACING THE CARBON FILTER
Tabla de contenidos
Otros manuales de Purificador de aire de Airpura
Airpura
Airpura C600 Manual de uso y cuidado
Airpura
Airpura H600-W Manual de usuario
Airpura
Airpura F600 DLX Manual de uso y cuidado
Airpura
Airpura R600 Manual de usuario
Airpura
Airpura P600 Manual de uso y cuidado
Airpura
Airpura UV600 Manual de usuario
Airpura
Airpura P600 Manual de usuario
Airpura
Airpura T600 Manual de uso y cuidado
Airpura
Airpura C600 Manual de uso y cuidado
Airpura
Airpura I-600 Manual de usuario
Airpura
Airpura R400 Manual de usuario
Airpura
Airpura TitanClean P600 Manual de usuario
Airpura
Airpura UV600 Manual de uso y cuidado
Airpura
Airpura H600 Manual de uso y cuidado
Airpura
Airpura V600 Manual de usuario
Airpura
Airpura I-600 Manual de usuario
Airpura
Airpura V600 Manual de usuario
Airpura
Airpura V600 Manual de uso y cuidado
Airpura
Airpura I-600 Manual de usuario
Airpura
Airpura T600 Manual de uso y cuidado
