AIROCIDE APS-1000XL Guía de inicio rápido

Photocatalytic Air Purification System
{Operational Manual }
APS-1000XL Model
www.airocide.com


3


1
The Airocide® Technology
Congratulations on your purchase of the NASA developed Airocide®
Photocatalytic Air Purification System; developed to oxidize all air-
borne organic matter, even those too small to be filtered. Airocide’s
unique technology employs a reaction chamber packed with tiny sili-
cone tubes encrusted with a highly reactive titanium dioxide catalyst.
When energized by the system’s 253.7 nanometer UVG lamps, water
molecules are split and surface-bound hydroxyl radicals are formed.
Any organic matter, no matter how small, that contacts these HO- radi-
cals is instantly destroyed. Airocide is listed by the FDA as a Class II
medical device and has been shown by independent Air Quality Labs
to be free of any ozone emission. The process results in only trace
amounts of pure water vapor and CO2 . Airocide oxidizes mold spores,
mycotoxins, bacteria, viruses and VOCs (gasses) on contact. Proven on
the International Space Station and Space Shuttle flights, Airocide is
simply the one that NASA developed. Airocide works.

2
Table of
Contents
Safety Instructions 4
Electrical Safety 5
Registration Plate 8
Air Purification System Features 9
User Interface Panel 10
Air Outlet Port 12
Power Supply 12
Air Inlet System 13
Outer Cover 15
Reaction Chamber Access Door 16
Operating Parameters for System
Status Indicator Lights 18
Power Management Technology 19
Airocide® System Placement & Installation 20
Mounting Hardware 20
Determining Location
of the Airocide® System 21
Orientation of the Airocide® System
Installing the Airocide® System 21

3
Airocide® System Initial Start Up 26
Operation of the Airocide® System 27
Maintenance & Care 28
Annual Maintenance
Requirements 28
Lamp Replacement 28
Large Particulate Screen
Replacement 31
Cleaning & Care 32
Trouble Diagnosis Guide 33
Limited Warranty 34
Product Specifications
& Declaration of Conformity 38

4
IMPORTANT SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
The Airocide® unit should be used only as recommended in this manual.
Failure to follow recommendations can result in serious injury.
WARNING:
For your safety and protection, read this entire Operation Manual before installing or operating your
Airocide® Photocatalytic Air Purification System. Keep this Operation Manual for future reference.
Other than as described in the installation instructions, under no circumstances should you remove the
outer cover of your Airocide® System. Refer to the Maintenance and Care section for details.
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Your Airocide® Air Purification System utilizes patented NASA developed technology. The heart of
this system is the reaction chamber. Never attempt to operate your Airocide® system without the
outer cover in place. Do not attempt to operate the Airocide® System with the reaction chamber cover
removed.
Optical Radiation Exposure
Skin or eye damage may result from directly viewing the light produced by the lamp in this apparatus.
Always disconnect power before relamping or servicing. Replace Lamp Only With Proprietary
Airocide Lamp Model No. TUV 8W T5, Manufactured Exclusively for Airocide. This light source is
safely contained within the reaction chamber. During normal use, it is not possible to become exposed
to the light source.
WARNING:

5
The Airocide unit, like all electrical appliances, presents the risk of fire,
electric shock, and the potential for serious injury or death if improperly
used. Always follow these precautions:
Electrical Safety
When using any electrical device, basic safety precautions should always be observed. To reduce the
risk of electrical shock, fire, and personal injury:
• Carefully read the operation manual before utilizing the device.
• Keep children away from the unit and supervise them when they are near it.
• DO NOT drop or insert objects into any openings in the unit.
• DO NOT disassemble the unit except when performing functions outlined in the Annual
Maintenance Kit Instructions that is included with your replacement lamp kit.
• Only use the unit indoors.
• Do not replace or alter the power cord in any way. If necessary, utilize the appropriate universal
conversion plug.
• This unit has a grounded plug. Use only in a compatible outlet that is installed and grounded in
accordance with electrical codes and ordinances. DO NOT alter the plug or force it into any outlet.
• DO NOT use the unit if the cord or plug are damaged.
• Keep the cord out of heavy traffic areas. To avoid fire hazard, NEVER put the cord under rugs,
furniture or appliances, near heat registers, radiators, stoves or heaters.
• DO NOT immerse the unit in water or other liquids or pour water or liquids on the unit.
• Always unplug the unit before moving it, changing filters, cleaning or whenever the unit is not in use.
Be sure to pull by the plug and not the cord.
• DO NOT use the unit with any solid-state speed control devices, such as a dimmer switch, that
controls power to the unit.
• DO NOT operate the unit where combustible gases or vapors are present.
• Turn the main power off before unplugging.
• DO NOT attempt to disassemble or service the electrical components while unit is plugged in.
• Never handle the plug or air purification unit with wet hands.
• DO NOT close the power cord in a door, pull it around sharp edges, or locate near hot surfaces.
• Keep the air purification unit away from steam and water.
• DO NOT operate the air purification unit near extreme heat or flammable gases.
WARNING:

6
INFORMATION IMPORTANTE SUR LA SÉCURITÉ
LIRE ET CONSERVER LES INFORMATIONS SUIVANTES
Pour votre protection et votre sécurité, veuillez lire attentivement tout le guide d’utilisateur avant
l’installation et l’utilisation de Airocide® Système de purification de l’air par filtre photocatalytique.
Conserver le guide de l’utilisateur pour référence ultérieure.
Excepté comme décrit dans le guide de l’utilisateur, en aucun cas le recouvrement extérieur de votre
système Airocide® doit être retiré. Consulter la section d’entretien et de nettoyage pour des détails
supplémentaires.
L’appareil n’est pas conçu pour l’utilisation par des personnes (y compris des enfants) ayant des
capacités physiques, sensorielles ou mentales limitées, ou dépourvu de l’expérience ou de la
connaissance nécessaire sauf avec surveillance ou après avoir été formés pour l’utilisation de l’appareil
par une personne responsable de leur sécurité. Les enfants doivent être sous supervision, l’appareil ne
doit pas être utilisé comme un jouet.
Votre système de purification d’air Airocide® utilise une technologie brevetée et développée par NASA.
Le cœur du système est une chambre à réaction. Ne jamais opérer votre système Airocide® sans le
recouvrement extérieur. Ne pas essayer d’opérer votre système Airocide® sans le recouvrement de la
chambre à réaction.
Exposition aux rayonnements optiques
Le système Airocide® utiliser une source de lumière pouvant présenter des dangers suivant
l’exposition lorsque les lunettes de protection ne sont pas utilisées. Cette source de lumière est
contenue en toute sécurité à l’intérieur de la chambre à réaction. Durant l’utilisation normale, il est
impossible d’être exposée à la source de lumière. Pour éviter tout danger, ne pas essayer d’opérer le
système Airocide® sans le recouvrement pour la chambre à réaction ou le recouvrement extérieur.
AVERTISSEMENT:
L’unité Airocide® doit être uniquement utilisée selon les
recommandations du manuel. Le non-respect de ces instructions
peut entrainer de grave blessure ou la mort.
AVERTISSEMENT:
Tabla de contenidos
Otros manuales de Purificador de aire de AIROCIDE




















