Airlink101 ATVUSB05 Manual de usuario
Model # ATVUSB05
User’s Manual
VER. 1A
1
Table of Contents
CHAPTER 1 INSTALLING HARDWARE ......................................................................................................2
1.1 Package Contents.................................................................................................................................2
1.2 Minimum System Requirements..........................................................................................................2
1.3 Upgrading USB 2.0 Host Controller Driver ........................................................................................2
1.4 Hardware Installation...........................................................................................................................3
CHAPTER 2 INSTALLING Airlink101 TV BOX DRIVER............................................................................3
CHAPTER 3 INTSTALLING PVR PLUS........................................................................................................6
CHAPTER 4 USING PVR PLUS......................................................................................................................9
CHAPTER 5 USING TVR ..............................................................................................................................10
5.1 Setting TV system and scanning channels.........................................................................................10
5.2 Main Panel Functions.........................................................................................................................12
5.3 Schedule Function..............................................................................................................................15
5.4 Setup Utility.......................................................................................................................................17
5.5 Channel Preview................................................................................................................................20
5.6 Snapshot.............................................................................................................................................20
5.7 Sleeping Timer...................................................................................................................................20
CHAPTER 6 USING MPEG ENCODER .......................................................................................................21
6.1 Interface Explanation.........................................................................................................................21
6.2 Streaming Video Translation..............................................................................................................21
6.3 Translation Option Dialog..................................................................................................................23
CHAPTER 7 USING VIDEO EDITOR ..........................................................................................................26
7.1 Menu Area..........................................................................................................................................27
7.2 Display Area.......................................................................................................................................28
7.3 Original and Staging Clips.................................................................................................................28
7.4 Frame Edit Mode ...............................................................................................................................30
CHAPTER 8 USING DVD MAKER..............................................................................................................31
8.1 Adding Files.......................................................................................................................................31
8.2 Burning...............................................................................................................................................32
8.3 Video Specifications...........................................................................................................................33
CHAPTER 9 FAQ............................................................................................................................................35
Appendix A ......................................................................................................................................................37
Product Specifications..............................................................................................................................37
Appendix B ......................................................................................................................................................38
Technical Support.....................................................................................................................................38
2
CHAPTER 1 INSTALLING HARDWARE
1.1 Package Contents
Unpack your Airlink101 TV box and make sure that all the items are intact. The following
items should be included in your package:
Airlink101 TV box
Audio Cable
Composite to S-Video Converter Cable
Power Adapter
Quick Installation Guide
Installation CD
Remote Control [requires two AAAbatteries (not included)]
1.2 Minimum System Requirements
Intel Pentium 4 2.0GHz or above CPU
256 MB RAM
200 MB available hard disk space
One available USB port (USB 2.0 recommended)
Microsoft Windows 2000/XP
VGA with 800x600 16-bit resolution (DirectX 9 supported)
AC 97 compatible sound card
Speakers for audio output
CD-ROM drive
1.3 Upgrading USB 2.0 Host Controller Driver
Before you plug the Airlink101 video capture adapter into your computer’s USB 2.0 port,
please check your USB 2.0 device driver first. If your USB 2.0 host controller driver is not
the latest version or provided by Microsoft, we strongly recommend you use our “USB 2.0
Updater” utility from the autorun page on the CD. It will help you to upgrade your USB 2.0
driver to the latest version released by Microsoft in order to avoid some compatibility issues.
Note: DO NOT connect the Airlink101 TV box to your computer when you are using the
USB update utility.
1.4 Hardware Installation
After you have updated the USB 2.0 host controller driver to the latest version, you can
install the Airlink101 TV box. Please refer to the diagram below as you follow the
installation procedures.
Note: Be sure to follow the steps carefully and plug in the USB 2.0 connector last.
1. Connect the coaxial cable for the TV antenna/cable to the TV port of the TV box.
2. Connect the S-Video cable from you video source to the S-Video port of the TV box. If
you don’t have an S-Video cable, use the provided Composite to S-Video converter
cable.
3. Connect the audio cable from your audio source to the AUD-IN port of the TV box.
4. Connect one end of the provided Audio Cable to the AUD-OUT port of the TV box and
connect the other end to the Line In port of your sound card.
5. Connect one end of the power adapter to the Power Adapter port of the TV box and
connect the other end to an electrical outlet.
6. Connect the USB 2.0 connector from the TV box to an USB 2.0 port on your computer.
CHAPTER 2 INSTALLING Airlink101 TV BOX DRIVER
Before installation, it is highly recommended that all background applications such as
antivirus software and system monitoring programs be disabled first.
1. When you plug in the USB 2.0 connector to the USB 2.0 port of your computer, the
Found New Hardware Wizard will appear. Click Cancel to quit the wizard and insert
the provided Installation CD.
3
2. The setup menu will automatically appear. Select Driver Install to start the driver
installation.
Note: If the setup menu does not appear automatically, go to Start, Run, and type
D:\autorun.exe (where Dis the letter of your CD-ROM drive) and click OK.
3. Click Next to install the driver for the Remote Control.
4. Click Next to install the driver for the TV box.
4
5. Click Next to launch the TVSetup utility.
6. Click Country to configure the setting.
7. For U.S.A., select one of the following.
5
8. Unplug the USB 2.0 connector from your computer, re-plug the connector, and click OK.
9. Select Yes, I want to restart my computer now and click Finish to restart your computer.
Note:If you want to re-configure the TV system, you can run the “TVSetup” utility to
change the setting. Click Start, Programs, Airlink101, ATVUSB05 Utilities, TVSetup to
execute the program.
CHAPTER 3 INTSTALLING PVR PLUS
PVR PLUS is a set of utilities that allow you to watch TV on your computer, edit video clips,
burn DVDs, and more. Before installation, it is highly recommended that all background
applications such as antivirus software and system monitoring programs be disabled first.
1. Insert the provided Installation CD.
6
2. Select PVR PLUS at the setup menu. If the setup menu does not appear automatically, go
to Start, Run, and type D:\autorun.exe (where Dis the letter of your CD-ROM
drive) and click OK.
3. Click Next to begin installation.
4. Click Next to accept the default Destination Location or click Browse to choose a new
location.
7
5. Click Next to accept the default Program Folder.
6. Click Finish to complete the installation.
8
CHAPTER 4 USING PVR PLUS
Double-click the PVR Plus icon on your desktop to run PVR PLUS. After you started PVR
PLUS, you can select the application you want to use. Click on each icon to start the
application.
9
•TVR: TVR turns your PC into a
full-featured video recorder. (For detailed
instructions, please refer to chapter 5).
•MPEG Encoder: MPEG Encoder
converts DV/AVI files into MPEG/DVD format.
(For detailed instructions, please refer to chapter
6).
•Video Editor: Video Editor allows you to
edit MPEG/DVD videos. (For detailed
instructions, please refer to chapter 7).
•DVD Maker: DVD Maker lets you create
VCD,SVCD,and DVD that can be played on a
PCorDVDplayer. (For detailed instructions,
pleaserefertochapter8).
Note: You can also view and edit pictures using PVR Plus. For detailed information about
how to view/edit the pictures, click the ?button on the PVR Plus console.
Otros manuales para ATVUSB05
1
Tabla de contenidos
Otros manuales de Decodificador de Airlink101
