Airflow 100mm Wallvent Manual de usuario

80001286 –Issue 1 01/23

Page 1 of 13

Airflow 100mm & 125mm

Wallvent Installation Guide

80001286 –Issue 1 01/23

Page 2 of 13

Contents

100mm Wallvent Fixing External Grille.......................................5

100mm Wallvent Fixing Internal Grille ........................................8

125mm Wallvent Fixing External Grille.......................................9

125mm Wallvent Fixing Internal Grille ......................................11

80001286 –Issue 1 01/23

Page 3 of 13

1. To minimise cracking, drill a pilot hole and then core

drill from both sides into the cavity.

NOTE: Horizontal ducting, including ducting in walls should

be arranged to slope slightly downwards away from the

internal grille to prevent backflow of any moisture into the

property.

Use a 102mm dia. Core drill for Airflow 100mm Wallvent.

Use a 127mm dia. Core drill for Airflow 125mm Wallvent.

1. Measure the wall thickness and cut the duct to length.

2. The tube should be flush to the inside and outside

surfaces.

Fig.1

80001286 –Issue 1 01/23

Page 4 of 13

NOTE: Airflow 125mm Wallvent duct comes in three detachable

pieces.

3. To ensure the integrity of the wall, each end of the cut duct

between the duct and the wall should be sealed.

The internal and external grilles can be fitted using either

screws or sealant/mastic. However, the following steps can

be followed for guidance purposes:

Fig.2 - For Airflow 100mm Wallvent only.

80001286 –Issue 1 01/23

Page 5 of 13

100mm Wallvent Fixing External Grille

1. The external grille can be fixed to the brickwork using

screws in the preformed holes located on the reverse

side of the grille. (Fittings not supplied.)

2. Carefully unclip the weather hood from the grille.

Clasps are located on the reverse of the grille below

the spigot.

3. Next, unclip the louvre panel from the grille backplate

by using a flat head screwdriver in the gap shown

below.

Fig.3

80001286 –Issue 1 01/23

Page 6 of 13

4. The preformed holes for fixing the external grille to the

brick will be located at each corner of the backplate.

Fig.4

80001286 –Issue 1 01/23

Page 7 of 13

5. Apply a bead of sealant around the spigot of the

external grille. (Sealant not supplied.)

6. Insert the external grille inside the duct from the

outside.

7. Before the sealant sets, ensure the grille is flush and

level before screw fixing.

8. Once fixed, re-attach the louvre panel and weather

hood ensuring they are securely in place.

Fig.5

80001286 –Issue 1 01/23

Page 8 of 13

100mm Wallvent Fixing Internal Grille

1. Unclip the louvre panel from the grille backplate by

using a flat head screwdriver in the gap shown in Fig.3.

2. The preformed holes for fixing the internal grille to the

internal wall will be located at each corner of the

backplate –refer to Fig.4.

3. To fix the internal grille, apply a bead of sealant around

the spigot.

4. Insert the internal grille backplate into the duct.

5. Before the sealant sets, ensure the grille is flush and

level before screw fixing.

Fig.6

80001286 –Issue 1 01/23

Page 9 of 13

125mm Wallvent Fixing External Grille

1. The external grille can be fixed to the external

brickwork using the preformed holes located on the

reverse side of the external grille in each corner.

Fittings not supplied.

2. Punch-through the holes on the reverse side of the

external grille using a suitable tool, avoiding damage to

the plastic panel.

Fig.8

80001286 –Issue 1 01/23

Page 10 of 13

3. Apply a bead of sealant around the spigot of the

external grille. (Sealant not supplied.)

4. Insert the external grille to the duct from the outside.

5. Before the sealant sets, secure the grille to the wall using

the punched holes in each corner, ensuring the grille is

flush and level.

Fig.9

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Admirador de Airflow

Airflow

Airflow QuietAir QT 100T Manual de usuario

Airflow

Airflow Uno hab Manual

Airflow

Airflow Duplexvent MULTI Manual de usuario

Airflow

Airflow DUPLEXVENT DV145SE Manual del propietario

Airflow

Airflow 7106A Manual de usuario

Airflow

Airflow AV125T Manual de usuario

Airflow

Airflow 7006A Manual de usuario

Airflow

Airflow QT 150T Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

Airflow

Airflow QuietAir QT 120T Manual de usuario

Airflow

Airflow CE100D Manual de usuario

Airflow

Airflow Uno hab Manual de funcionamiento

Airflow

Airflow iCON 30 Guía de instalación

Airflow

Airflow 90001265 Manual de funcionamiento

Airflow

Airflow LA VERNE Manual de usuario

Airflow

Airflow 7106A Manual de usuario

Airflow

Airflow QuietAir QT 100MST Manual de usuario

Airflow

Airflow AIROVENT MEV WH4H CENTRAL EXTRACT Manual de usuario

Airflow

Airflow 7005A Manual de usuario

Airflow

Airflow AV100T Manual de usuario

Airflow

Airflow iCON Series Manual de usuario

Airflow

Airflow Duplexvent MULTI-N Manual de usuario

Airflow

Airflow 72687117 Guía de instalación

Airflow

Airflow Duplexvent Flexi-V DV500 Manual de servicio

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje