Aiphone PC-359B Manual de usuario

SYSTEM/MODEL: NEM

MODIFICATION: Installing PC-359B (or PC-454) with speaker and call button

COMPONENTS REQUIRED: 1. PC-359B or PC-454: Call holding circuit board, one per remote

speaker/call button

2. LT-1: 8 to 20 ohm transformer, one per remote speaker (Use

speaker with 1W handling capacity.)

INSTR/OPERATIONS: 1. If the existing speaker is 8 ohms, install the LT-1 transformer

with the BLUE wires to the speaker.

2. If the existing speaker is 45 ohms, install the LT-1 with the

RED wires to the speaker.

3. Make connections to PC-359B/454 as shown, being careful

not to short any exposed metal components on the PC board. (A

soldering iron and soldering skills are required for the PC-359B.

Wires are provided on the PC-454.)

4. Make sure that no moisture can come into contact with the PC

board when it is installed in its designated location.

REFERENCE DRAWING #: 0404-602

DIFFICULTY LEVEL: 4 - Moderate/hard - Internal connection or component addition.

Aiphone’s product warranty applies to products properly modified using these instructions.

However, if a unit is damaged as a result of improper modification, the warranty does not apply.

- INSTRUCTIONS -

The PC-359B call holding circuit board provides the latching function when a call is placed from a remote station on the

NEM series Lamp Memory System. With this circuit board, a speaker and a "Normally Open" call button can be used as

a remote station where a standard sub station cannot be used. The NEM system impedance is 20 ohms, so either use

a 20 ohm speaker, or an 8 ohm speaker with the LT-1 matching trasformer.

PC-359B

Call Holding Circuit Board for Non-Aiphone Speaker and Call Button with

NEM, NDR, NDRM Systems

Aiphone Communication Systems

1700 130th Ave. N.E.

Bellevue, WA 98005

(425) 455-0510

FAX (425) 455-0071

TOLL FREE TECHNICAL SUPPORT: (800) 692-0200

TOLL FREE FAX LINE: (800) 832-3765

E-MAIL: [email protected]

PC-359B Instr.

0404PHJS

SPECIFICATIONS:

Power Source: Supplied by Master Station (NEM, NDR, NDRM)

Speaker: Use 20 ohm speaker, or 8 ohm speaker with LT-1 transformer

Call Button: Normally open momentary contact

Mounting: Conceal behind speaker or call button

Terminations: Solder connections directly to PC board made by installer

Wiring: 2 conductor shielded (1 common and 1 individual wire per remote)

Wiring Distance: 420' w/ 22AWG, 1,000' w/ 18AWG

Dimensions (HxWxD): 3-3/16" x 1-1/4" x 5/8"

WIRING DIAGRAM:

PC-359/B

(solder side view)

To "E" terminal

of master

Speaker

"+"

To "#" terminal

of NEM master

To Speaker "-"

Add jumper

between "6" and "7"

Normally Open

call button

* Note that speaker connection is on inner land

pattern solder pad, not the one closest to the edge.

** When using an 8 Ωspeaker, add the LT-1

transformer shown below.

** 20 Ω

speaker

20 Ω (red)

LT-1

8 Ω(blue)To PC-359/B. To 8 Ωspeaker.

WIRING DIAGRAM

Call Holding Circuit Board for the NEM System

Connection of speaker, call button, and wiring to master

Using PC-454

Drawing Name:

PC359B~454

0404ph

PC-454

(component view)

To "E" of master

(jumper together)

To 20Ωspeaker "-"

To 20Ωspeaker "+"

To corridor lamp

(remove 1-3 jumper)

To "#" of master

& Call button

To Call button

Green

Black

Gray

White

Blue

Red

Orange

Purple

11 10 9 8 7 6 5 4 3 2 1

Tabla de contenidos

Otros manuales de Sistema de intercomunicación de Aiphone

Aiphone

Aiphone IX-RS-B Manual de usuario

Aiphone

Aiphone JB-2HD Manual de usuario

Aiphone

Aiphone MK-2DA Manual de usuario

Aiphone

Aiphone MK-2DG Manual de usuario

Aiphone

Aiphone TB-12F Manual de usuario

Aiphone

Aiphone JKW-IP Manual de usuario

Aiphone

Aiphone KAH-2 Manual de usuario

Aiphone

Aiphone IX SERIES Manual de usuario

Aiphone

Aiphone NDR Manual de usuario

Aiphone

Aiphone TC-NMD TC-10MD Manual del propietario

Aiphone

Aiphone IE-DC Manual de usuario

Aiphone

Aiphone GT-2C Manual de usuario

Aiphone

Aiphone IXG System Manual de usuario

Aiphone

Aiphone NE-DA Manual de usuario

Aiphone

Aiphone AP-1M Manual de usuario

Aiphone

Aiphone LAF-10S Manual de usuario

Aiphone

Aiphone LEF-3C Manual de usuario

Aiphone

Aiphone GF System Manual de usuario

Aiphone

Aiphone LEF-3L Manual de usuario

Aiphone

Aiphone INTERCOM AN-8000 Manual de usuario

Aiphone

Aiphone LAF-3B Manual de usuario

Aiphone

Aiphone Y24/B Manual de usuario

Aiphone

Aiphone LAF-7B Manual de usuario

Aiphone

Aiphone DL-10 Manual de usuario

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Perel

Perel EDB4 Manual de usuario

Bticino

Bticino Classe 300 Manual de usuario