Agrilight AGRIBOX pro Manual de usuario
AGRIBOX pro
Installation and user manual
Original manual V1.0
©Agrilight b.v. 2020
2
3
Manual for the Installer and End-user
Dear Customer,
Thank you for purchasing the AGRIBOX pro. This manual contains all the information necessary to
allow you to quickly familiarise yourself with the product. Please read this information carefully before using
the product for the rst time.
This manual is intended for both the installer and the end-user of the AGRIBOX pro. The table of contents
allows you to nd the information you need in the manual. We recommend that you perform the steps in the
order described in this manual.
This is the original manual. Store the manual in a safe place!
For further information or to order manuals,
please contact:
Agrilight
Vlotlaan 643
2681 TV
Monster
Tel.: +31 (0) 174 287 287
Fax: +31 (0) 174 287 292
E-mail: [email protected]
www: www.agrilight.com
4
Introduction
Product description
Intended use
The AGRIBOX pro is a light management system intended for automatic control of lighting luminaires. Any
other form of use than that described above does not constitute an intended use. Agrilight B.V. cannot be
held responsible for any injury or damage caused by the system being used incorrectly, unwisely or contrary
to the intended use.
Agrilight B.V. gives the CE mark only to the AGRIBOX pro. The installer of the AGRIBOX pro is personally
responsible for the electrical installation in accordance with the provisions of the law. Note that if the
AGRIBOX pro becomes part of a larger system, this system as a whole must be quali ed for the CE mark.
Safety must be assured at all times so that the installer, the end-user and third parties can use the AGRIBOX
pro safely.
Registration
The type and serial number plate is attached to the AGRIBOX pro ( g. 1). Always include the type numbers
of your luminaire when you contact your local Lely service provider or order spare parts. This information can
be found on the production sticker.
1. Legal manufacturer
2. Production type manufacturer
3. Range connected power supply
4. Used current
5. Maximum used power consumption
6. Frequency range power supply
7. Ingress protection rate
8. Serial number
9. Manufacturing date month-Year
10. For markings, see manual
4
5
6
7
3
2
1
8
9
10
5
Table of Contents
1 Precautions and Safety Instructions 6
2 Symbols 6
3 Warranty 6
4 TechnicalSpecications 7
4.1 General product specications 7
4.2 Environmental inuences 8
4.3 Tools required for the installer 8
5 Most important parts 9
5.1 AGRIBOX pro 9
5.2 Overview of touchscreen icons and most important screens 9
6 Installation and Setup 11
6.1 Draw up a lighting plan 11
6.2 Preparation for use: Installation and electrical connection 11
6.3 Installing the AGRIBOX pro 12
6.4 Installing the light sensor (IP65) 14
6.5 Electrical connection of the AGRIBOX pro 16
6.6 Setting up the AGRIBOX pro 18
6.7 Add a second AGRIBOX pro as slave 53
6.8 Prepare the AGRIBOX pro for 0 - 10 V luminaires 57
7 Operation 59
7.1 Switching a program on or off 59
7.2 Switching the groups on or off 61
7.3 Switching the control light program ON and OFF 65
8 MaintenanceandMaintenancePlan 67
9 FaultsandRepairs 67
10Disposal 67
11WEEE 67
12 CE Declaration of Conformity 68
6
1 Precautions and Safety Instructions
Danger! Keep the product away from water. If the electronic components
come into contact with water, this can lead to an electric shock or even
electrocution.
• Special know-how is necessary for assembly and installation so that
only correspondingly qualied personnel should be entrusted to carry
out this work.
Assembly and installation must be performed in accordance with the
local laws and regulations.
• Do not use the product if the product or cable is damaged.
• Disconnect the product from the power supply before starting
installation or maintenance.
• Do not replace parts yourself. Consult a recognised maintenance tter.
• The AGRIBOX pro contains electronic components that are sensitive
to interference. Install the product out of the range of objects that can
cause electrical interference, or if possible remove the objects that can
cause electrical interference.
• Cordon off the working area for unauthorised persons during the
installation.
• Wear the proper protective clothing during installation, such as working
gloves, work shoes, helmet and protective overalls.
2 Symbols
In this user and installation manual, the following marking conventions have been used to draw
attention to certain subjects or actions.
Danger! The life of the user is directly threatened.
Warning! The user can (seriously) injure himself or cause serious
damage to the product. A warning indicates the injury to the user or the
damage to the product if the user does not follow the procedures
carefully.
Note! A note contains supplementary information for the user. A note
draws the user's attention to possible problems.
3 Warranty
Agrilight B.V. offers a warranty on production and material faults for a period of two (2) years from the original
date of purchase of the product, on condition that the product is used only for its intended purpose. Any
damage caused by abnormal use, improper handling, cleaning or negligence is not covered by this warranty.
Agrilight B.V. gives no warranty on assembly and installation.
7
4 TechnicalSpecications
4.1 Generalproductspecications
Product description
Name: AGRIBOX pro
Year of production: 2015
Manual version 08-2020
Technicalspecications
Voltage 100-240 V(AC) (-15% / +10%)
Frequency 50-60 Hz
Current 0.47A@ 115 VAC / 0.28 A @ 230 VAC
Starting peak 55 A @ 115 VAC / 95 A @ 230 VAC
Power 20 W
Power factor > 0.95
Mains supply voltage 3-core
DALI connection 2-core (galvanically separated)
Analog connection 0..10 V, max. 100 mA, galvanically separated, 2-pin
Red control light contact Floating contact, for 230 VAC, max. 10 A
Screen signalling Static connection, 3-core
Light sensor 0..10 V (3-core, screened)
Master/slave connector Yes
Light groups Max. 5
Timer programs 10
Number of DALI drivers Max. 64
Dimmable Yes (100% ~ +/- 10%)
IP degree of protection IP65
Operating temperature 0°C ~ + 40°C (Ta)
Storage temperature -20 °C ~ + 60 °C (Ta)
Relative humidity 40% ~ 90% (Ta)
Article dimensions (L x W x H) 240 x 194 x 85 mm
Packaging dimensions (L x W x H) 380 x 295 x 160 mm
Article weight 1.2 kg
Weight incl. packaging 1.4 kg
Supply cable diameter 8 - 13 mm
DALI cable diameter 2 x 1.5 mm2, not supplied
Cable for light sensor 3 x 0.34 mm2, screened
Connecting cable length 7 mm
Warranty (years)* 2
* See Warranty terms
8
4.2 Environmentalinuences
The AGRIBOX pro may only be used indoors in livestock pens, agricultural buildings and sheds. The product
must not be used in wet environments or outd oors. Use in other environments can inuence the
performance of the product or may damage the product.
4.3 Tools required for the installer
Screwdrivers
(at and cross-head)
Drill Wire stripper Luxmeter
9
5 Most important parts
5.1 AGRIBOXpro
14
2
3
Parts list
1 Touchscreen 6 Washers
2 Mounting holes (4x) 7 Sealing plugs for the glands not used
3 Cover 8 Plugs
4 Light sensor 9 Screws
5 Glands
5.2 Overviewoftouchscreeniconsandmostimportantscreens
Start screen
Overview screen
5
9
6
78
10
Touchscreen icon Description
The corresponding function is switched OFF.
The corresponding function is switched ON.
The program is switched ON.
Conrm an entered value.
Delete the whole value.
Backspace; delete the last character.
The function bar of a group:
- OFF: The group is switched off.
- Program: The program belonging to the group
is switched on.
- Manual: Manual operation of the group
Otros manuales para AGRIBOX pro
1
Tabla de contenidos
