AGPtek RP33 Manual de usuario
CONTENTS
01/07
08/15
16/23
24/31
32/39
40/46
English
Deutsch
Italiano
Español
Français
日本語
1
Quick Guide
Plug earphone into the jack of the recorder, then
slide the power slider to “ON” position to turn on
the recorder.
Each time you press the button / , it will bring
you to one of its 4 different functions, including REC,
Music, Set, playing/played(Only available when there
is music/recordings playing/paused in the
background).
Press the PLAY button to access to its function.
Charge the recorder
1. Charge your recorder by the included 3.5mm USB connector.
Connect you recorder with a running computer through the USB
port.
2. Charge your recorder via a 5V/500mA charge adaptor (not
included in the package).
2
1.Power slider
2.Menu button
3.Volume
button/Back
4.Recording
5.Previous/Rewind/
Volume +
6.Next/Fast
forward/Volume-
7.Play/Pause/Enter
/Power on/off
8.Earphone
jack/charging/data
transfer
9.Recording hole
10.Speaker
11.Display
Parts and Controls
Power On/Off
1. Power On: Slide the power switch to "On" position. If the switch is
already at "On" position, just press the PLAY button for 3 seconds.
3
2. Power Off:
1) Slide the power switch downwards to turn it off.
2) Press the PLAY button for 3 seconds when the switch is at the
opposite side of "On" position.
Note: If you cannot switch on the recorder, please make sure the
slider switch is on the right side.
Recordings
Whenever interfaces, slide REC button upwardly to start
recording after it is powered on.
Press PLAY button to stop or resume recording.
Slide the REC button downwards to save the
recording and go to the audio playing interface
automatically, press PLAY button to play.
Press / to go to the previous/next audio file.
While there is “REC” icon on main screen, press the PLAY button to
access to its function. Then a related list will show as, Recordings
library, Recording quality, AVR set, Monitor.
Recordings library, all of the recordings saved will be listed here.
Recording quality, choose the record format and bit rate.
AVR set, turn on/off the AVR mode.
Note: When choose to turn on AVR mode, and press REC button to
start recording, the recorder will start recording automatically if
sound is detected and stop recording when no sound detected.
Monitor, choose to turn on/off monitor.
4
Music
Adjust Volume
Hold the Volume button(③) on left side of the recorder to access to
volume adjustment interface, and then press the button / to
increase/decrease the volume.
Rewind/Forward
While it ’ s on music playing interface, hold the button to fast
forward, press to go to next music file; hold the button to rewind,
press to go to the previous song file. Press the PLAY button to
play/pause.
Submenu
While it’s on music playing interface, press the button“MENU”on
the top left corner to access to the submenu. Then a related list will
show, including “Sound settings”, “Repeat”,“Variable Speed
Playback”and “Repeat settings”.
1. Sound settings
Choose different music style such as “Rock”, “Funk”etc.
2. Repeat
Choose to Repeat1/Repeat all/Shuffle or turn off this function.
3. Variable Speed Playback
Set the playing speed as needed.
4. Repeat settings
press the button “MENU”>“Repeat Settings”>“Repeat Mode”
to access to its function, and the icon for A-B indication will appear
5
on playing screen.
Starting time for replay is confirmed while pressing the icon
(button ⑥) (B is flashing)
press the icon (button⑥)again and then it will start replaying
(adjust the replay paragraph according to your need).
press the icon (button⑥)again to back to normal playing.
Press “Replay settings” > “Replay Times”, and then choose from
1 to 10 with button / .
Press “Replay settings” > “Replay Interval”, then choose from 1
to 10 seconds with button / .
Transfer Files to Your recorder
Connect your device to the computer with the 3.5mm USB
connector. The mp3 recorder will show up as a removable disk as
soon as the computer recognize it and then just drag files into the
mp3 recorder. If your computer cannot recognize the recorder, the
3.5mm USB connector may has problem, please use another 3.5mm
USB cable to connect it to your PC.
Settings
While there is “Set” icon on main screen, press the PLAY button to
access to its function.
Language: Choose your language;
Display settings: Set the Brightness and Backlight timer of your
recorder;
Date and time: Set the Date and time according as needed; Press
6
MENU button to select year/month/day/ hour/minute. Press /
to set the year/month/day/hour/minute. Press PLAY button to save
your settings.
Sleep timer: Choose "Off" to turn off this function or set the sleep
timer between 1-99(minutes), when it reaches the sleep time you
set, the recorder will power off automatically;
Save mode: Shut off automatically when there is no operation in
the background and reaches the set time after powered on, select
the time in 1(minute)/2(minute) or “OFF”to disable this function.
Disk space/Firmware version: see total or available
space/firmware version of your recorder.
Format device/Factory settings: Format the device or restore to
factory setting.
Help and Troubleshooting
Can’t turn the recorder on
Please check whether the battery has been run out, maybe you can
connect the recorder with computer and try again after charging.
Can’t hear the sound
-Please check if the volume is set to 0.
-Check that the headset is inserted correctly.
Can’t download file from computer
-Please confirm whether it’s connected properly
-Please check whether the storage space of the internal memory is
full
7
-Please check whether the USB connector is damaged
Specifications
Display
0.8 inch
Weight
57g
Recording formats
MP3: 32 kbps; 64 kbps; 128 kbps
PCM: 512kbps,768kbps,1024kbps,1536kbps
Music formats
MP3/WMA/WAV/APE
Size
88mm*23mm*13mm
S/N
88 dB
Distortion
0.05%
USB interface
USB2.0 HIGH SPEED
Capacity
8 GB(No expandable memory)
Battery capacity
230mAh
Recording distance
10 meters
Charge time
2 hours（5V 500mA)
OS
Windows98/ME/2K/XP/SP2/Vista/Linux6.2/
Mac os 10.3, USB 2.0 port
If you have any questions, please feel free to contact
support@agptek.com.
8
Kurzanleitung
Stecken Sie den Kopfhörer in die Buchse des
Recorders und schieben Sie dann den
Ein/ausschalten in die Position "Ein", um den
Recorder einzuschalten.
Jedes Mal, wenn Sie die Taste / drücken, es
bringt dich zu einer seiner 4 verschiedenen
Funktionen, einschliesslich REC, Musik, Einstellung,
abspielen / gespielt (Nur verfügbar, wenn Musik /
Aufnahmen im Hintergrund abgespielt / angehalten
wurden).
Drücken Sie die PLAY-Taste, um auf ihre Funktion
zuzugreifen.
Laden Sie den Recorder auf
1. Laden Sie Ihren Recorder über den mitgelieferten
3,5-mm-USB-Anschluss auf. Verbinden Sie Ihren Recorder über den
USB-Port mit einem laufenden Computer.
2. Laden Sie Ihren Recorder über einen 5V / 500mA Ladeadapter auf
(nicht im Lieferumfang enthalten).
Tabla de contenidos
Idiomas:
Otros manuales de Grabadora de voz de AGPtek
