Agilent Technologies 81150A Manual de usuario

Agilent

Pulse Function Arbitrary

Noise Generator

81150A

Getting Started Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including electronic

storage and retrie al or translation into a

foreign language) without prior agreement and

written consent from Agilent Technologies,

Inc. as go erned by United States and

international copyright laws.

Manual Part Number

81150-91010

Edition

First edition, No ember 2007

Printed in Germany

Agilent Technologies, Deutschland GmbH

Herrenberger Str. 130

71034 Böblingen, Germany

For Assistance and Support

http://www.agilent.com/find/a

ssist

Warranty

his Agilent product has a warranty against

defects in material and workmanship for a

period of three years from date of shipment.

During the warranty period, Agilent

echnologies will, at its option, either repair

or replace products that prove to be defective.

For warranty service or repair, this product

must be returned to a service facility

designated by Agilent echnologies. he

Buyer shall pay Agilent’s round-trip travel

expenses. For products returned to Agilent

echnologies for warranty service, the Buyer

shall prepay shipping charges to Agilent and

Agilent shall pay shipping charges to return

the product to the Buyer. However, the Buyer

shall pay all shipping charges, duties and

taxes for products returned to Agilent

echnologies from another country. Agilent

echnologies warrants that its software and

firmware designated by Agilent for use with

an instrument will execute its programming

instructions when properly installed on that

instrument. Agilent does not warrant that the

operation of the instrument software, or

firmware, will be uninterrupted or error free.

Limitation of Warranty

The foregoing warranty shall not apply to

defects resulting from improper or inadequate

maintenance by the Buyer, Buyer-supplied

software or interfacing, unauthorized

modification or misuse, operation outside of

the en ironmental specifications for the

product, or improper site preparation or

maintenance.

No other warranty is expressed or implied.

Agilent Technologies specifically disclaims the

implied warranties of merchantability and

fitness for a particular purpose.

Exclusive Remedies

The remedies supplied are the Buyer’s sole

and exclusi e remedies. Agilent Technologies

shall not be liable for any direct, indirect,

special, incidental, or consequential damages,

whether based on contract, tort or any other

legal theory.

Assistance

Product maintenance agreements and other

customer assistance agreements are a ailable

for Agilent products. For any assistance,

contact your nearest Agilent Sales Office.

Certification

Agilent Technologies Company certifies that

this product met its published specifications at

the time of shipment. Agilent further certifies

that its calibration measurements are traceable

to the United States Institute of Standards and

Technology, to the extent allowed by the

Institute's calibrating facility, and to the

calibration facilities of other International

Standards Organization members.

Safety Summary

General Safety

Precautions

The following general

safety precautions must be

observed during all phases

of operation of this

instrument. Failure to

comply with these

precautions or with

specific warnings

elsewhere in this manual

violates safety standards of

design, manufacture, and

intended use of the

instrument.

Agilent Technologies Inc.

assumes no liability for the

customer's failure to

comply with these

requirements.

Before operation, review

the instrument and manual

for safety markings and

instructions. You must

follow these to ensure safe

operation and to maintain

the instrument in safe

condition.

General

This product is a Safety

Class 1 instrument

(provided with a protective

earth terminal). The

protective features of this

product may be impaired if

it is used in a manner not

specified in the operation

instructions.

All Light Emitting Diodes

(LEDs) used in this

product are Class 1 LEDs

as per IEC 60825-1.

Environment Conditions

This instrument is intended

for indoor use in an

installation category II,

pollution degree 2

environment. It is designed

to operate at a maximum

relative humidity of 95%

and at altitudes of up to

2000 meters.

Refer to the specifications

tables for the ac mains

voltage requirements and

ambient operating

temperature range.

Before Applying Power

Verify that all safety

precautions are taken. The

power cable inlet of the

instrument serves as a

device to disconnect from

the mains in case of

hazard. The instrument

must be positioned so that

the operator can easily

access the power cable

inlet. When the instrument

is rack mounted the rack

must be provided with an

easily accessible mains

switch.

Ground the Instrument

To minimize shock hazard,

the instrument chassis and

cover must be connected to

an electrical protective

earth ground. The

instrument must be

connected to the ac power

mains through a grounded

power cable, with the

ground wire firmly

connected to an electrical

ground (safety ground) at

the power outlet. Any

interruption of the

protective (grounding)

conductor or disconnection

of the protective earth

terminal will cause a

potential shock hazard that

could result in personal

injury.

Services and Support

Any adjustment,

maintenance, or repair of

this product must be

performed by qualified

personnel. Contact your

customer engineer through

your local Agilent

Technologies Service

Center. You can find a list

of local service

representatives on the Web

at:

http://www.agilent.com/Se

rvice/English/index.html

Do Not Operate in an

Explosive Atmosphere

Do not operate the

instrument in the presence

of flammable gases or

fumes.

Do Not Remove the

Instrument Cover

Operating personnel must

not remove instrument

covers. Component

replacement and internal

adjustments must be made

only by qualified

personnel.

Instruments that appear

damaged or defective

should be made

inoperative and secured

against unintended

operation until they can be

repaired by qualified

service personnel.

Safety Symbols on

Instruments

Indicates warning or caution. If

you see this symbol on a product,

you must refer to the manuals for

specific Warning or Caution

information to avoid personal

injury or damage to the product.

Safety requirements for electrical

equipment for measurement,

control, and laboratory use

CAN/CSA C22.2 No. 1010.1

(1993) UL 3101, 3111 (First

Editions). This equipment has

also been evaluated to IEC 61010

edition 1 including amendments

1 and 2.

Notice for European Community:

This product complies with the

relevant European legal

Directives: EMC Directive

89/336/EEC and Low Voltage

Directive 73/23/EEC.

Conformity Mark of the

Australian ACA for EMC

compliance.

General Recycling Mark for

plastic parts used in the product.

Environmental Information

This product complies with the WEEE Directi e

(2002/96/EC) marketing requirements. The affixed

label indicates that you must not discard this

electrical/electronic product in domestic household

waste.

Product category: With reference to the equipment

types in the WEEE Directi e Annexure I, this product

is classed as a “Monitoring and Control

instrumentation” product.

Do not dispose in domestic household waste.

To return unwanted products, contact your local

Agilent office, or see

www.agilent.com/environment/product/ for more

information.

Introduction

Contents

81150A Getting Started Guide 7

Contents

Contents ................................................................................................................................................................ 7

1Introduction............................................................................................................................................ 9

2Installing the 81150A ..........................................................................................................................10

2.1 The Front Panel............................................................................................................................ 11

2.2 The Front-Panel Display at a Glance........................................................................................ 14

2.2.1 Menu Mode..................................................................................................................... 14

2.2.2 Graph Mode .................................................................................................................... 15

2.3 The Rear Panel............................................................................................................................. 16

3Getting Started ....................................................................................................................................17

3.1 Setting up a Clock Signal ........................................................................................................... 18

3.2 Setting up a Pulse Signal........................................................................................................... 25

3.3 Setting up a Continuous Burst.................................................................................................. 36

3.4 Setting up a Triggered Burst ..................................................................................................... 41

3.5 To output a Modulated Wa eform ........................................................................................... 48

3.6 To output an FSK Wa eform ..................................................................................................... 53

3.7 To output a Frequency Sweep................................................................................................... 59

3.8 Setting up a Triggered Frequency Sweep ............................................................................... 65

3.9 Coupling between Channels...................................................................................................... 72

3.9.1 Settings for Channel 1................................................................................................... 72

3.9.2 Settings for Channel 2................................................................................................... 74

3.10 Adding up Channel 1 and Channel 2........................................................................................ 82

3.10.1 Settings for Channel 1................................................................................................. 83

3.10.2 Settings for Channel 2................................................................................................. 87

4Installation and Maintenance............................................................................................................94

4.1 Options and Accessories ........................................................................................................... 94

4.2 Power Requirements................................................................................................................... 95

4.3 Ventilation Requirements........................................................................................................... 96

4.3.1 Thermal Protection ........................................................................................................ 96

4.4 Battery........................................................................................................................................... 97

Contents

8 81150A Getting Started Guide

4.5 Operating En ironment............................................................................................................... 98

4.6 Cleaning Recommendation........................................................................................................ 99

Introduction

81150A Getting Started Guide 9

Introduction

Introduction The Agilent Technologies 81150A is a 120 MHz synthesized Pulse Function

Arbitrary Noise Generator with built-in arbitrary wa eform and pulse

capabilities.

Standard

Deliverables

Check if the Agilent 81150A shipping container contains the following

standard deli erables:

The Agilent 81150A 120 MHz Pulse Function Arbitrary Noise

Generator

Power Cable

USB Cable

The Product CDs (contains the User Guide and the Getting Started

Guide)

General

Instructions

If the contents are incomplete, if there is a mechanical damage, or if

the instrument does not work within its specifications, notify the

nearest Agilent Office. The Agilent office will arrange for the repair or

replacement without awaiting settlement.

Once you ha e plugged in the instrument, you can start using it.

Make sure you keep the entilation holes free whene er you install

the instrument.

Note Refer to the User Guide deli ered on the Product CD if you need more

information about working with the instrument.

Installing the 81150A

10 81150A Getting Started Guide

Installing the 81150A

Introduction This section guides you through the first steps when installing/operating

the 81150A ia the user interface.

For information on operating the 81150A ia the Remote Interface, refer to

the Remote Programming Reference chapter in the 81150A User Guide.

Switching On the

Instrument

The instrument executes the power-on selftest during the boot phase. If

there are errors, the instrument displays the power-on error messages.

These messages can be seen anytime later as they are not cleared until the

instrument is switched off.

Otros manuales para 81150A

Tabla de contenidos

Otros manuales de Generador de pulsos de Agilent Technologies

Agilent Technologies

Agilent Technologies 8114A Manual de usuario

Agilent Technologies

Agilent Technologies 81133A Manual de usuario

Agilent Technologies

Agilent Technologies N6030A Series Manual de usuario

Agilent Technologies

Agilent Technologies 8133A Manual de usuario

Agilent Technologies

Agilent Technologies 81110A Guía de inicio rápido

Agilent Technologies

Agilent Technologies 8114A Manual de usuario

Agilent Technologies

Agilent Technologies E4438C Manual de usuario

Agilent Technologies

Agilent Technologies 81104A Manual de usuario

Agilent Technologies

Agilent Technologies 16440A Manual de usuario

Agilent Technologies

Agilent Technologies E8305A Manual de usuario

Agilent Technologies

Agilent Technologies 8131A Manual de usuario

Agilent Technologies

Agilent Technologies 8130A Guía de inicio rápido

Agilent Technologies

Agilent Technologies 81150A Manual de usuario

Agilent Technologies

Agilent Technologies 81110A Manual de usuario

Agilent Technologies

Agilent Technologies 222A Manual de usuario

Agilent Technologies

Agilent Technologies 81101A Manual de usuario

Manuales populares de Generador de pulsos de otras marcas

HP 8082a Manual de servicio

Schwarzbeck

Schwarzbeck IGUU 2916 Manual de usuario

Anaheim Automation

Anaheim Automation MBC10P31 Manual de usuario

BIOTRONIK

BIOTRONIK Philos DR-T Manual de usuario

BNC

BNC 575 Series Manual de usuario

Hioki

Hioki U8793 Manual de usuario

HP 8012A Manual de usuario

Bradley

Bradley 233 Manual de usuario

DEI

DEI PCX-7500 Manual de usuario

Kiepe Elektrik

Kiepe Elektrik DG Series Manual de usuario

Hagerman Technology

Hagerman Technology FryBaby Manual de usuario

BNC

BNC MOD745T Manual de usuario

AVTECH ELECTROSYSTEMS LTD.

AVTECH ELECTROSYSTEMS LTD. AVG-4A-B Manual de usuario

Avtech

Avtech AVR-G1-B Manual de usuario

Avtech

Avtech AVOZ-D2-B Manual de usuario

Tektronix

Tektronix 114 Manual de usuario

AVTECH ELECTROSYSTEMS LTD.

AVTECH ELECTROSYSTEMS LTD. AVR-E5-B Manual de usuario

BNC

BNC 505-2C Manual de usuario