Congratulations on your purchase of your new AeroPlus RC 110”Airtractor 502. We hope that
you will enjoy this plane and that it will exceed your expectations in what a model airplane can
be. Thank you, AeroPlus RC
Unpacking
Carefully unpack the model, when opening the plastic bags make sure you do not to cut any
covering on the model. Inspect each item to make sure there was no damage in shipping. If for
any reason, you are not happy with any part or are unsure please contact the Dealer that you
purchased your plane from.
Covering
Because of the multiple climate zones encountered on the trip from the factory to you, some of
the covering may have wrinkles. We highly recommend that you take time to reseal all covering
edges with an iron and to use a heat gun to remove any wrinkles and retighten the covering. It is
best to do this now before the plane is assembled.
*Note: Be careful not let any heat get near parts like the canopy or cowl as this may cause
damage.
Assembly Tips
We also recommend that you go over all the accessible joints with cyano glue. Wick glue into
areas of high stress around the U/C plate and motor box.
Use a quality Thread-lock on all metal to metal joints. Even if your model is electric powered with
lower levels of vibration the thread-lock will ensure that things do not fall off of your airplane!!
