
1|Omni-directional Ground Station with BLE/Wi-Fi Technology Datasheet
Omni-directional Ground
Station with BLE/Wi-Fi
Technology
Introduction
OGS station is an ADS-B and BLE/Wi-Fi RemoteID Omni-directional receiver station with multi-constellation GNSS
sensor to provide best accuracy. LTE connectivity which simple setup of the MQTT broker allows usage in all LTE/4G
rich environments without the need for any additional cabling to send data. It has been designed to allow quick and
easy assemble enclosed in IP67 case for high weather condition resistance. Device comes with all necessary cables
and antennas for straight forward installation.
Data can be used with your server (user gets full data access). There is no obligation to send data to foreign servers,
user always retains data.
Air traffic data is also available via API and can be integrated with third-party software and applications, for example
using the MQTT protocol.
It is a perfect solution for permanent installation in open areas for constant airspace monitoring and conducting
VLOS/BVLOS operation where safety is critical.
Applications
• Airports and critical infrastructure
• Nationwide traffic management systems (manned and unmanned)
• Perfect solution for local airfields
• U-Space and UTM systems
• Network based Remote Identification (central monitoring)
Date: 2022-12-20 Document ref: 23ob-v1.0.15
This
document
is
subject
to
change
without
notice.
For
technical
questions,
contact:
[email protected]