Aero-Pac JETMOVER Manual de usuario
Operator’s Manual
Aero-Pac® JETMOVER
Model jetmover Manual , Rev 20130103
General Description and Application
The aero-pac jetmover is a 24VDC optional 36VDC) aircraft towunit designed to
provide pilots, flying clubs, private owners and aviation maintenance
professionals with an affordable reliable aircraft helicopter) towunit.
The aircraft/helicopter version is powered by a 24VDC or 36VDC dry lead
batteries, through an intelligent controller the speed is controlled.
Forward and Reverse at different speeds lineair thought and electronic control
turning handle.
The Jetmover includes :
1. lead batteries, differential gear engine different engines for wireless
operations)
2. Intelligent charger , input 110V/220VAC, which leaves no memory effect
on the batteries, and batteries can be charged at all times. keep the
batteries in charged condition at all times to increase battery life.
3. Control handle, with forward and backwards selector.
4. Powder coated steel frame optional in your color / logo ).
5. Intelligent electronic controller for speed and engine control.
6. Optional Working light.
7. Optional Continuous power supply
8. Optional battery starter included.
9. Optional wireless control.
It is ideal for:
• private aircraft hangars
• Flying schools and clubs.
• FBOs, avionics & maintenance shops
• air shows and aircraft exhibitions
Charging instructions :
Never leave the battery uncharged for long periods; it may result in damage to
the battery.
ALWAYS SELECT BATTERY SWITCHES OFF INCASE NOT IN USE, OTHERWISE
THE RELAYS WILL DRAIN THE BATTERIES.
Green light : battery fully charged
Red light : battery charging.
Charger is working on 110 V or 220 VAC
ADAPTER MOUNTING or helicopter skids and operation (optional)
1. Place adapter bars into the open ends of the frame.
2. Approach helicopter from the front allowing adapter to fit skids as needed
secure the straps.
3. Secure adapter to gear depending on adapter type and tighten
accordingly.
4. Tight the straps around skids, firmly.
5. Lift the front section of helicopter by use of manual hydraulic lifting device.
6. Start moving the unit at slow speed , slowly increase the speed.
7. The spring loaded drive on ramp is mounted in the front by two metal
hook adapters, which are bolted on and spring it put in place.
8. The master battery switch must be off when unit is not in use.
9. To start operation, select master switch on, then select key on. There is
also an emergency shutoff switch need the handle.
10.The handle has two grips, which are turned clockwise / counter clockwise
to adjust the speed.
Aero-Pac jetmover® Operation :
Check for obstacles during tow operation. Perform aircraft fuel check and oil
check of aircraft before starting tow operations.
Use Chocks: When returning the aircraft to the hangar, use chocks to prevent
hitting the rear of the hangar or other obstructions.
Always check for clearance around the entire aircraft prior to moving the aircraft.
Operating Speed: The electric jetmover is designed to operate at a slow walking
speed for safety .
Controls
1. Rotatable handgrip : turn clockwise to increase the speed, contour
clockwise for speed decrease.
2. Near the winch is an emergency disconnect switch, press in to stop unit
during emergency situation. rotate anti clockwise to get into normal
configuration).
3. The hobbs meter counts the time in use. on when key on, optional).
4. The key switch should be turn clockwise to select unit on, anti clock wise
off. use battery switch to select unit completely off.)
5. The electrical winch is operated by selector up/down, maximum 6000 kg.
the electrical winch is not needed, just as backup , the unit is equipped
with springloaded drive on scoop which will load the aircraft front tire by
driving underneath.
6. Near each wheel is a manual parking brake selected optional.
7. Lubricate the chains monthly.
8. Optional there is a drive on locking plate for aircraft front tire or tailwheel
tire. The aircraft tire locks into position by driving underneath.
Optional control handle.
T
T
H
HE
E
O
OP
PT
TI
IO
ON
NA
AL
L
C
CO
ON
NT
TR
RO
OL
L
H
HA
AN
ND
DL
LE
E
H
HA
AS
S
F
FO
OL
LL
LO
OW
WI
IN
NG
G
F
FU
UN
NC
CT
TI
IO
ON
N
:
:
1. O
O
N
N
/
/
O
OF
FF
F
S
SE
EL
LE
EC
CT
TO
OR
R
U
UN
NI
IT
T
2.
S
SL
LO
OW
W
/
/
F
FA
AS
ST
T
M
MO
OD
DE
E
3.
S
SP
PR
RI
IN
NG
GL
LO
OA
AD
DE
ED
D
P
PO
OT
TE
EN
NT
TI
IO
ON
N
M
ME
ET
TE
ER
R
F
FO
OR
R
F
FO
OR
RW
WA
AR
RD
D
A
AN
ND
D
R
RE
EV
VE
ER
RS
SE
E
.
.
Speci ications:
Charger input : 110-240 Volts AC, 50-60 Hz.
Aero-Pac
®
I
NDUSTRIAL PARK STROHOF
K
RUISBOOMMOLENSTRAAT
7/9
8800
R
OESELARE
BELGIUM
I
NFO
@
AERO
-
PAC
.
COM
Tabla de contenidos
Otros manuales de Tractor de Aero-Pac
