AEMC instruments 1954 Manual de usuario

WITH AEMC

INSTRUMENTS

THERMAL IMAGING CAMERAS

Thermal Imaging

IR Camera

Model 1954

ENGLISH

User Manual

No part of this documentation may be reproduced in any form or by any means (including electronic

storage and retrieval or translation into any other language) without prior agreement and written consent

from Chauvin Arnoux®, Inc., as governed by United States and International copyright laws.

Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments

15 Faraday Drive • Dover, NH 03820 USA

Tel: (800) 945-2362 or (603) 749-6434 • Fax: (603) 742-2346

This documentation is provided “as is,” without warranty of any kind, express, implied, or otherwise.

Chauvin Arnoux®, Inc. has made every reasonable e󰀨ort to ensure that this documentation is accurate;

but does not warrant the accuracy or completeness of the text, graphics, or other information contained

in this documentation. Chauvin Arnoux®, Inc. shall not be liable for any damages, special, indirect,

incidental, or inconsequential; including (but not limited to) physical, emotional or monetary damages

due to lost revenues or lost prots that may result from the use of this documentation, whether or not the

user of the documentation has been advised of the possibility of such damages.

Chauvin Arnoux®, Inc.

d.b.a AEMC®Instruments

www.aemc.com

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments

certies that this instrument has been calibrated

using standards and instruments traceable to

international standards.

We guarantee that at the time of shipping your

instrument has met the instrument’s published

specications.

An NIST traceable certicate may be requested

at the time of purchase, or obtained by returning

the instrument to our repair and calibration

facility, for a nominal charge.

The recommended calibration interval for this

instrument is 12 months and begins on the date of

receipt by the customer. For recalibration, please

use our calibration services. Refer to our repair and

calibration section at www.aemc.com/calibration.

Serial #:

Catalog #: 2121.41

Model #: 1954

Please ll in the appropriate date as indicated:

Date Received:

Date Calibration Due:

4 Thermal Imaging IR Camera Model 1954 - User Manual

TABLE OF CONTENTS

1. INTRODUCTION..................................................................7

1.1. PRECAUTIONS FOR USE........................................................ 8

1.2. RECEIVING YOUR SHIPMENT............................................... 8

1.3. ORDERING INFORMATION.................................................... 9

1.3.1. Accessories & Replacement Parts .................................... 9

2. GETTING STARTED ......................................................... 10

2.1 BATTERY INSTALL ATION ...................................................... 10

2.2 MICRO SD MEMORY CARD INSTALLATION ...................... 11

2.3 CAMER A D IS PL AY.................................................................. 12

2.3.1 Main Screen ..................................................................... 12

2.3.1.1 Status Bar .................................................................................... 12

2.3.1.2 Image........................................................................................... 14

2.3.1.3 Measurements Display................................................................ 14

2.3.1.4 Function Buttons (F1, F2, and F3)............................................... 14

2.4 CONFIGURING THE CAMERA.............................................. 16

2.4.1 Languages ........................................................................ 17

2.4.2 Date and Time.................................................................. 17

2.4.3 Units of Measure (Temperature and Distance) ................ 18

2.4.4 Trigger Function................................................................ 18

2.4.5 Automatic Camera Shutdown Time.................................. 19

2.4.6 Screen Brightness............................................................ 19

2.4.7 Image Storage Directory .................................................. 20

2.4.8 Color Palettes................................................................... 21

3. BASIC OPERATION .........................................................22

3.1 MEASUREMENT CURSOR .................................................... 22

3.1.1 Estimating Measurements Without a Cursor .................... 22

3.1.2 Locating Hot and Cold Spots in an Image (MinMax)........ 23

3.1.3 Measuring Temperature at a Point in the Image (Point) ... 23

3.1.4 Measuring Temperatures of a Zone in the Image (Area) .. 23

3.1.5 Displaying the Temperature Prole of a Line in the Image

(Prole) ...................................................................................... 23

3.1.6 Displaying Points at the Same Temperature in an Image

(Isotherm) .................................................................................. 23

3.2 FREEZING PALETTE COLORS............................................. 24

Thermal Imaging IR Camera Model 1954 - User Manual 5

4. ADVANCED OPERATION................................................25

4.1 BEST PRACTICES................................................................... 25

4.2 COMPENSATING FOR INFLUENCING PARAMETERS ..... 25

4.2.1 Default Compensation Settings ........................................ 26

4.2.2 Custom Compensation Settings....................................... 26

4.3 TRIPOD..................................................................................... 27

5. SAVING AND RECALLING IMAGES ..............................28

5.1 IMAGE FILES ........................................................................... 28

5.1.1 Naming Conventions......................................................... 28

5.1.2 Directories......................................................................... 28

5.2 SAVING AN IMAGE ................................................................. 29

5.3 VOCAL MESSAGE .................................................................. 30

5.3.1 Creating a Vocal Message ............................................... 30

5.3.2 Changing the Vocal Message for an Existing Image ....... 31

5.4 RECALLING AN IMAGE.......................................................... 32

5.4.1 Derived Files from Recalled Images................................. 33

5.5 DELETING AN IMAGE ............................................................ 33

5.6 DOWNLOADING IMAGES TO A COMPUTER...................... 34

5.6.1 Downloading Directly from the Micro SD Memory Card... 34

5.7 CAMREPORT IMAGE ANALYSIS AND REPORT

GEN ER ATION ................................................................................ 34

6. SETUP FILES .................................................................... 35

6.1 CREATING A SETUP FILE ..................................................... 35

6.2 RECALLING A SETUP FILE ................................................... 36

6.3 DELETING A SETUP FILE...................................................... 36

6.4 RESTORING ORIGINAL DEFAULT SETTINGS ................... 36

7. BLUETOOTH..................................................................... 37

7.1 BLUETOOTH ACTIVATION/DEACTIVATION ........................ 37

7.1.1 Activating Bluetooth........................................................... 37

7.1.2 Deactivating Bluetooth ...................................................... 37

7. 2 H E A D S E T ................................................................................. 37

7.2.1 Headset Connection ......................................................... 38

7.2.1.1 First Time Connection.................................................................. 38

7.2.2 Changing Headsets .......................................................... 38

7.2.3 Headset Disconnection .................................................... 39

6 Thermal Imaging IR Camera Model 1954 - User Manual

7.3 MEASUREMENT DEVICES.................................................... 39

7.3.1 Peripheral Connection ...................................................... 40

7.3.2 Replacing Devices............................................................ 41

7.3.3 Device Polling Period........................................................ 41

7.3.4 Device Measurements Display ......................................... 41

7.3.5 Using a Measurement to Compensate for Environmental

Factors....................................................................................... 43

8. FIRMWARE UPDATES .....................................................44

9. TROUBLESHOOTING ......................................................45

9.1 IR IMAGE IS A SINGLE SOLID COLOR ................................ 45

9.1.1 Color Palette Frozen ......................................................... 45

9.1.2 Inconsistent User Inuencing Parameters ........................ 45

9.2 CONTRAST OF IR IMAGE IS INCORRECT ......................... 45

9.3 UNABLE TO SAVE DISPLAYED IMAGE............................... 45

9.4 SLOW OPENING OF FILES.................................................... 45

9.5 HEADSET CANNOT CONNECT TO CAMERA..................... 46

9.6 BLUETOOTH DEVICE CANNOT CONNECT TO CAMERA 46

10. MAINTENANCE............................................................... 47

10.1 CAMERA CLEANING ............................................................ 47

10.2 INFRARED OPTICS CLEANING ......................................... 47

10.3 REPAIR AND CALIBRATION................................................ 47

10.4 TECHNICAL ASSISTANCE................................................... 48

10.5 LIMITED WARRANTY........................................................... 48

10.5.1 Warranty Repairs............................................................ 49

APPENDIX A: MENU TREE .................................................50

APPENDIX B: EMISSIVITY TABLE ....................................52

APPENDIX C: TECHNICAL SPECIFICATIONS.................54

Thermal Imaging IR Camera Model 1954 - User Manual 7

1. INTRODUCTION

Do not aim the camera at the sun or other sources of powerful

thermal radiation.

Thank you for purchasing an AEMC®Instruments Thermal Imaging IR Camera

Model 1954.

For the best results from your instrument and for your safety, you must read the

enclosed operating instructions carefully and comply with the precautions for use.

Only qualied and trained operators should use this product.

Symbols and Denitions

CAUTION - Risk of Danger! Indicates a WARNING. Whenever this symbol

is present, the operator must refer to the user manual before operation

WARNING! Class 2 laser radiation (output <1 mW, wavelength 645 – 655

nm). If the ap is open, do not look into the beam

Indicates Important information to acknowledge

This product complies with the Low Voltage & Electromagnetic Compatibility

European directives

The UKCA marking certies that the product is compliant with the

requirements that apply in the United Kingdom, specically regarding

Low-Voltage Safety, Electromagnetic Compatibility, and the Restriction of

Hazardous Substances.

The product has been declared recyclable

In the European Union, this product is subject to a separate collection

system for recycling electrical and electronic components in accordance with

directive WEEE 2012/19/EU

8 Thermal Imaging IR Camera Model 1954 - User Manual

1.1. PRECAUTIONS FOR USE

■Never aim the camera at the sun or other strong source of thermal

radiation. This can impair camera operation and/or damage its infrared

sensor. To avoid accidental exposure, close the lens ap when the camera is

not in use.

■Avoid exposure to dust with the lens ap open. Dust on the lens can

absorb thermal ux and cause articial di󰀨usion. It can also degrade image

sharpness. To clean the lens, refer to § 10.2.

■Do not touch the lens with your ngers. Acids from human skin can

damage the lens and its coatings.

■Avoid jolting or dropping the camera.

■Do not point the camera’s laser pointer at a person’s eyes. This can result

in burns and other damage to the eyes.

■Caution! Observe all safety warnings! Use of controls or adjustments,

or performance of procedures, other than those specied herein, may

result in hazardous radiation exposure.

1.2. RECEIVING YOUR SHIPMENT

Upon receiving your shipment, make sure that the contents are consistent with

the packing list. Notify your distributor of any missing items. If the equipment

appears to be damaged, le a claim immediately with the carrier and notify

your distributor at once, giving a detailed description of any damage. Save the

damaged packing container to substantiate your claim.

Thermal Imaging IR Camera Model 1954 - User Manual 9

1.3. ORDERING INFORMATION

Thermal Imaging IR Camera Model 1954...................................... Cat. #2121.41

Incudes carrying case, external battery charger, USB cable, four NiMh

rechargeable batteries, micro SD card with adaptor, Bluetooth headset, quick

start guide, and a USB drive containing the user manual, CAmReport software,

and software manual.

1.3.1. Accessories & Replacement Parts

Case – Carrying Case with Foam Insert.......................................... Cat. #2121.60

Adapter - US External Battery Charger ........................................... Cat. #2121.64

Cable – USB (Type A to 5-pin Mini-B) .............................................Cat. #2126.49

The rechargeable batteries supplied with the camera can be charged with any

commercially available AA charger.

10 Thermal Imaging IR Camera Model 1954 - User Manual

2. GETTING STARTED

2.1 BATTERY INSTALLATION

The camera accepts four AA batteries, alkaline or NiMH rechargeable. The latter

can be recharged with an external charger supplied with the camera.

When the batteries are removed, the internal clock has su󰀩cient power for 15 h.

The batteries are inserted through the end of the handle. Open the cover using a

coin while pressing down on the locking tab:

2.1.1 Battery Management

The Battery management menu appears

when the batteries have been removed. If

you insert fully-charged batteries, advanced

management allows more options.

After the batteries are installed or replaced, the

Battery management menu appears when the

camera rst starts up. This menu can also be

displayed by pressing and holding down the

F2 button when the camera is powered ON.

In the Battery management menu, the

function buttons perform the following:

F1 conrms the information entered

closes the window, and initializes the settings

F2 edits and conrms entry of the

selected item

F3 cancels an entry or closes the window

without resetting the battery options

Otros manuales para 1954

Tabla de contenidos

Otros manuales de Cámara térmica de AEMC instruments

AEMC instruments

AEMC instruments 1954 Manual de usuario

AEMC instruments

AEMC instruments 1950 Manual de usuario

Manuales populares de Cámara térmica de otras marcas

Hikmicro

Hikmicro B20 Manual de usuario

FLIR

FLIR E-EST Series Manual de usuario

FLIR

FLIR M-Series Manual de usuario

BST

BST BT-72 Manual de usuario

FLIR

FLIR G300 pt Series Manual de usuario

CBC

CBC EN7-S02T Manual de usuario

Satir

Satir YRH600 Manual de usuario

TESTO

TESTO 882 Manual de usuario

TECPEL

TECPEL TIG-320 Manual de usuario

SKF

SKF TKTI 21 Manual de usuario

TESTO

TESTO 885 Manual de usuario

InfiRay

InfiRay AT300 Series Manual de usuario

InfiRay

InfiRay AT Series Manual de usuario

FLIR

FLIR X6530sc Series Manual de usuario

Videotec

Videotec MAXIMUS MVXT Manual de usuario

Guide Sensmart

Guide Sensmart D384M Manual de usuario

NBN

NBN FLIR A6 Series Manual de usuario

WORKSWELL

WORKSWELL SAFETIS Manual de usuario