AEG BHPV18 Manual de usuario
BHPV18
Original instructions
2
2
Important!
It is essential that you read the instructions in this manual before assembling,
operating and maintaining the product.
Subject to technical modifications.
33
15
12
11
10
13
14
9
4
1
5
6
7
8
2
3
ACTUAL
ACTUALAUTO TARGET
MANUAL
17
18
19
20
21
16
1. Handle
2. High volume hose
3. Deflator port
4. Digital gauge
5. Control dial
6. Digital gauge rotating ring
7. High pressure hose
8. High pressure deflator valve
9. LED light
10. Inflator port
11. Sports ball needle
12. Presta valve adapter
13. Tapered raft nozzle
14. High volume nozzle
15. Battery port
16. 12V car adaptor port
17. Power button
18. Mode button
19. LED light button
20. Start/Stop button
21. 12V car adaptor cable
4
4
10
9
13
6
55
Remove the battery pack before
starting any work on the machine
12
11
13
ACTUAL
ACTUALAUTO TARGET
MANUAL
8
6
6
ACTUAL
MANUAL
1
1
2
Remove the battery pack before
starting any work on the machine
click
1
2
When the inflator is connected to the 12 V
car adapter, lay the inflator flat and rotate
the digital gauge 180° for proper display.
77
78-100 %
33-54 %
55-77 %
10-32 %
<10 %
8
8
ACTUALMANUAL
1
2
AUTO TARGET AUTO TARGET ACTUALAUTO
1
1 2 3
2
3
5s
1s 5s
1s
1 2
Press the Power button to switch on the inflator. The default mode is
“high pressure inflation- manual”.
Press and hold the Start/Stop button to start inflating. Release the
Start/Stop button to stop inflating.
Rotate the Control dial clockwise to enter “high pressure inflation- auto” mode. Continue rotating the dial to set the target
pressure. Press the Start/Stop button to start inflating. Press the Start/Stop button again to stop inflating, otherwise the inflator
will automatically stop once the target pressure is met. To switch back to manual mode, rotate the dial counterclockwise.
Press and hold the Mode button to change the display unit. Press the Mode button to cycle through the list of pressure units.
Press and hold the Mode button to set the unit, otherwise the unit will be set after 3 seconds if there is no user input.
Press the Mode button to switch the mode to “high volume inflation”. Press the Start/
Stop button to start inflating. Press the Start/Stop button again to stop inflating.
Inflation will stop after running continuously for 15 minutes, to protect the inflator.
99
1
3
ACTUALMANUAL
4
2
1
2
10
10
1
3
ACTUALMANUAL
4
2
1
2
Tabla de contenidos
Otros manuales de Herramientas eléctricas de AEG
AEG
AEG BS18G3 Manual de usuario
AEG
AEG PST 500 X Instrucciones de operación
AEG
AEG BST18BLX-0 Manual de usuario
AEG
AEG OMNI 18C-PB Manual de usuario
AEG
AEG OMNI-JS Manual de usuario
AEG
AEG 413580 Manual de usuario
AEG
AEG BSB 18 Manual de usuario
AEG
AEG OMNI 12C-PB Manual de usuario
AEG
AEG PL 750 Manual de usuario
AEG
AEG MF 1900 Manual de usuario
AEG
AEG BSB18 G2 Manual de usuario
AEG
AEG 412819 Manual de usuario
AEG
AEG BBH 24 Manual de usuario
AEG
AEG BMT18 Manual de usuario
AEG
AEG ST 500 Manual de usuario
AEG
AEG BST18BLXLI-402C Manual de usuario
AEG
AEG 403665 Manual de usuario
AEG
AEG BS 14C Manual de usuario
AEG
AEG BKP18C600 Manual de usuario
AEG
AEG Turbo MBS 30 Manual de usuario
